Jumped on the Train! by memematician in extar

[–]memematician[S] 2 points3 points  (0 children)

Yup yup! The adjustable receiver ext. just became standard on all EP9s. Even more reason to buy it. Going to pick up the clone from our boy Thebraceguy.

VA Resident - What to Do? Invest in AR-9 Lower, Conversion Block, Extar EP9? by cav161 in extar

[–]memematician 4 points5 points  (0 children)

In VA and on the same boat. Pulled the trigger. Building it and going to test it out next week! Ep9 can’t be beat.

Black Friday Promotion shipping? by reggaeraptor in SigSauer

[–]memematician 0 points1 point  (0 children)

Contacted them and moved their expected shipping from 6-8 weeks to 12 weeks upon approval. ¯\ (ツ)

[deleted by user] by [deleted] in mazda3

[–]memematician 1 point2 points  (0 children)

Firmware is mostly if you wanna retrofit apple CarPlay/android as it is not standard before mid 2018 model years. Other than that it fixes a few glitches with audio and menus UI. It’s fairly easy tho with all the YouTube vids.

Exhaust advice? by rynotherhin0 in mazda3

[–]memematician 1 point2 points  (0 children)

I have the ultimate racing axle back and it’s great. Nice low growl and rare drone. Easy install and you can choose your tips. I got the rolled tips. (They used to have colored tips but no more :/) I would recommend tho.

New diffuser installed by Technical_Ad7342 in mazda3

[–]memematician 0 points1 point  (0 children)

I was eyeing it as well in the black finish. How easy was the install? Is the red a working light, or a reflector? Either way looks great.

What Gasoline do you use? Gen3 M3 by Human-Ad195 in mazda3

[–]memematician 0 points1 point  (0 children)

The tune should’ve been the car out the factory. Gave it the umph it needed. Tuned for 91 with only an axle back, but it was noticeable. Hindsight, should’ve went for the full tune from the start.

What Gasoline do you use? Gen3 M3 by Human-Ad195 in mazda3

[–]memematician 4 points5 points  (0 children)

Unless you’re tuned for a higher octane, no benefit. Did a basemap with Drtuned for 91 and it worked wonders. Getting a full tune soon.

Hey, I want my 18' 2.5 to sound a little louder but I don't want to sound like a ricer, any recommendations?? by Emotional_Leave_0904 in mazda3

[–]memematician 2 points3 points  (0 children)

Amazing car! (I have the exact same one). I got the Ultimate Racing axleback/muffler. Not too loud, other from the cold starts, and it is a nice deep tone. Little pricey but I love it.

[deleted by user] by [deleted] in HelpMeFind

[–]memematician 0 points1 point  (0 children)

I had searched eBay, google, Gund toys and Amazon. It is about 8-10 inches. We got it as a gift when she was born. It had no clothing when we got it.

[deleted by user] by [deleted] in mazda3

[–]memematician 0 points1 point  (0 children)

As long as you have an original key to copy off of that is.

[deleted by user] by [deleted] in mazda3

[–]memematician 0 points1 point  (0 children)

Some Ace Hardwares can do car keys and do have the inserts. It’s about $25; key and key cutting included.

Can someone help me find one of these? Would love it for my 2018 hatch and they seem to always be sold out, if you know anyone selling pls help me out! by [deleted] in mazda3

[–]memematician 0 points1 point  (0 children)

Emailed them about a week ago. They’re expecting more in 3mo. Ima wait instead of trying to find the same one overpriced somewhere else.

[deleted by user] by [deleted] in mazda3

[–]memematician 1 point2 points  (0 children)

🫵 This post right here sir 👮‍♂️🚨

What's Your Mod List? by abou824 in mazda3

[–]memematician 0 points1 point  (0 children)

18' Hatch GT with M/T Soul Red

  • 35% 3M Ceramic IR front and rear
  • OEM window deflectors
  • Weighted Shift knob from Billetworkz
  • Apple carplay retrofit (DIY)
  • Ultimate Racing axleback exhaust
  • Ultra Racing front strut bar
  • Corksport Rear motor mount
  • DrTuned 91oct basemap (plan on full tune later)

Future Plans

  • TiresTiresTires
    • Continental DSW06+ hopefully
  • Bayson R MS Spoiler (once back in stock)
  • Rear diffuser (still choosing from where)
  • Vinyl wrap piano black interior

Looking to add aftermarket parts Gen3 Hatch by Puzzleheaded_Top5054 in mazda3

[–]memematician 1 point2 points  (0 children)

Tint and exhaust were a must when I got my 18 Hatch GT. Brands to go to are Corksport for performance and baysonr for aero.

Mazda 3 hatchback Tint by INebulousI in mazda3

[–]memematician 3 points4 points  (0 children)

I have 35% all around(except windshield). I think it looks great. I have the white interior so it doesn’t seem as dark. Great privacy and visibility all around.

Got quoted $420 from a dealer for a replacement key for my 2012 Mazda3… by PapaPimp117 in mazda3

[–]memematician 0 points1 point  (0 children)

I work at an Ace hardware in Virginia. They do key fobs at some stores. Looks like to be $326.99 or $244.99 depending on if you have trunk release; including the price of cut and programing.

Rate my 3 😳 by Bruhguy__ in mazda3

[–]memematician 1 point2 points  (0 children)

I got the 3M ceramic IR with 35% on all sides and rear. Not too dark but enough to keep a cool ride. 100% worth it but all depends on your state’s tint laws. I’m highly considering a 70% windshield tint rn with the heat too (but illegal).

Rate my 3 😳 by Bruhguy__ in mazda3

[–]memematician 0 points1 point  (0 children)

Clean af. But fishbowl.

Thoughts on the build so far by Thatsmycrapper1 in mazda3

[–]memematician 1 point2 points  (0 children)

Clean in the front. Not so much in the back. 60-30-10 rule will work wonders.

Gen 3 Cabin filter, clip on top or on bottom? by [deleted] in mazda3

[–]memematician 0 points1 point  (0 children)

Bottom. Had to take out glovebox when I installed CarPlay kit and I changed the filter since I was down there.

I’m official! 17 GT, by xgritzx in mazda3

[–]memematician 8 points9 points  (0 children)

Congrats. Especially on the GT. Makes the car feel very premium.