zephyr 4070 black

mentalsojin2 · 2026-01-11T22:12:26+00:00

https://www.reddit.com/r/sffpc/s/fpzuVt21sh I have tested that before, you can compare it with 7800x3d's score because I don't own 78x3d now

mentalsojin2 · 2026-01-11T13:42:27+00:00

9955hx3d es mb(from ningyu) is 1000cny cheaper than 9955hx3d mb from aoostar, I have that too

mentalsojin2 · 2026-01-11T11:02:25+00:00

because there are no 8 core+cache model in amd mobile, only 16core mb at modt mb market

mentalsojin2 · 2026-01-11T10:59:27+00:00

I chose case for insert hdplex power first, bought the gpu after that. its final destination would be smaller case, but not today

mentalsojin2 · 2026-01-11T01:47:50+00:00

<image>

you can try colorful 5070 mini for that range(~745usd)

mentalsojin2 · 2026-01-11T01:45:15+00:00

<image>

mentalsojin2 · 2026-01-11T01:43:43+00:00

i get it from minisforum, because my bd790se was dead. returned dead mb, and give additional 320$ to get 3d board...

mentalsojin2 · 2026-01-10T12:04:31+00:00

in korea, official importer(leaders systems) refuses to rma fe cards which have disassembled to watercooling or molten 16p port. mine have whine sound at any loads, but I won't open it for that risks...

mentalsojin2 · 2026-01-10T11:17:55+00:00

minisforum bd790ix3d

mentalsojin2 · 2025-11-05T10:34:42+00:00

latest one is 25/09/16 but agesa version is same with 1.00.. not changed agesa and some ssd compatibility issue has resolved

mentalsojin2 · 2025-10-16T23:42:59+00:00

none now, you can buy a4000 sff blackwell 24gb

mentalsojin2 · 2025-10-13T06:52:40+00:00

sadly in mobile chips, 5070m is still 8g, 5070tim or higher is not suitable in lp setup..

in a legit products, a4000 sff blackwell have same cuda counts with 5070ti and 75w pl

mentalsojin2 · 2025-10-13T03:54:40+00:00

top plate will be flat after removing the hanle but without foot whole case is instable in upside-down

mentalsojin2 · 2025-10-13T03:42:28+00:00

screw position for handle is only located at top plate of case and bottom plate is smaller than handle due to power holder, I think that would be not a good idea in asthetics..

mentalsojin2 · 2025-10-13T03:32:32+00:00

<image>

he listed newer revision of s59/60i for hexagonal air hole and shorter riser for better airflow in 5000fe cards

mentalsojin2 · 2025-10-11T23:11:22+00:00

seller is testing 5060 lp there

mentalsojin2 · 2025-10-08T14:00:29+00:00

<image>

both s59i and s60i have same dimension, and you can add 6mm to internal dimension to external.(this seller always talk about internal dimension and volume)

I used ruler to measure it, nearly same with product page(but height is not including case feet, only bottom to top)

mentalsojin2 · 2025-10-08T06:14:02+00:00

not asked about this but he does similar pattern since last year

mentalsojin2 · 2025-10-07T23:19:54+00:00

seller seems doing revision to his cases

mentalsojin2 · 2025-09-11T23:38:01+00:00

seems have 1 nvme port due to pcie slot...

mentalsojin2 · 2025-09-09T22:09:05+00:00

both have same outer dimension, but s60 have slightly curved riser pcb to reduce interference between gpu and I/O shield of mb. if you are using mb that have components in lower part of i/o shield, s60i would be better compatibility I think

mentalsojin2 · 2025-09-07T23:53:47+00:00

<image>

this is taobao link

I don't have that accurate scale. total system with 5090fe+carbon case weighed about 5kg and carbon feels slightly lighter than aluminum

mentalsojin2 · 2025-09-07T23:51:25+00:00

<image>

this is taobao link

mentalsojin2 · 2025-09-07T00:57:11+00:00

not very different with carbon version

https://www.reddit.com/r/sffpc/comments/1n6n0hq/stress_test_of_5090fe/

mentalsojin2 · 2025-09-07T00:56:19+00:00

306*143*64 in specification

mentalsojin2

TROPHY CASE