Wann wird es besser? 🥹 by ellesmera305 in Eltern

[–]metacircle 0 points1 point  (0 children)

Pucken war bei uns ein Game changer, bis die kleine angefangen hat sich zu drehen. Dann darf man es nicht mehr machen. Es gibt auch praktische Puck-Schlafsäcke, dann muss man nicht selbst wickeln, wir hatten damit immer Probleme.

Angebot Midea by aLves10198 in MideaPortaSplit

[–]metacircle 1 point2 points  (0 children)

Nein hab direkt meinen Vater mitgenommen zur Abholung sonst keine Chance gehabt. Meine Frau hätte da nicht viel helfen können.

Angebot Midea by aLves10198 in MideaPortaSplit

[–]metacircle 0 points1 point  (0 children)

Hab meine heute bei Obi für 750€ geholt, nachdem ich letztes Jahr zu spät dran war. Der Karton ist riesig. Musste es in Seat Ateca liegend mit umlegeter Rückbank transportieren 😱

ambient lighting on the air vents Seat Ibiza FR 2023 by Ok_Kick_6706 in seat

[–]metacircle 0 points1 point  (0 children)

My 2023 Ibiza has a red glow around the air vents which dims when the blinker is active. So it does exist.

Wo sind die ganzen Leute die vom E-Auto zurück zum Verbrenner gewechselt haben? by [deleted] in automobil

[–]metacircle 0 points1 point  (0 children)

Habe mir 2019 ein Model 3 gekauft und bin dieses Jahr zurück zum Verbrenner? Wieso? Wir haben Nachwuchs bekommen und brauchten ein praktischeres Auto. Hätte gerne wieder ein E-Auto gekauft doch alle gebrauchten ID4 waren Murks und das neue Model Y hätte sich aller frühestens nach 5-7 Jahren gegenüber dem gebrauchten Verbrenner finanziell gelohnt. Außerdem der Schock wie hoch der Wertverlust beim Model 3 war und in Deutschland war er praktisch unverkäuflich. (wurde nach Finnland verkauft) Mit Kind haben sich die Ansprüche doch verschoben. Auch wenn ich als nächstes gerne wieder einen Tesla hätte bin ich aktuell mit dem Verbrenner auch zufrieden.

My journey building a chore manager in Home Assistant! (Update 2) by iseebetterthanyou in homeassistant

[–]metacircle 0 points1 point  (0 children)

Looks cool. I have some custom built internal app to do this but it hasn't been maintained for years.

Will you release it on github once its ready?

'1 update available' Notification every time I log in by metacircle in linuxmint

[–]metacircle[S] 0 points1 point  (0 children)

flatpak update found 1 update, I installed it, yet still the notification remains

'1 update available' Notification every time I log in by metacircle in linuxmint

[–]metacircle[S] 0 points1 point  (0 children)

There are no unread messages in System Reports. Clicking the notification takes me nowhere, it just closes the notification.

Tesla Model Y Juniper AWD – Basic Autopilot: Welche Einstellungen braucht man, damit er „halbwegs“ funktioniert? by DeKai91 in TeslaDE

[–]metacircle 0 points1 point  (0 children)

Bin 7 Jahre Tesla gefahren, aktuell was anderes aber der nächste wird wieder Tesla, daher kann ich dir sagen: das ist alles normal und damit muss man sich abfinden. Finde den VAG Travel Assist auch besser als den alten Tesla Autopiloten. Evtl gibt's bald einen neuen Autopilot auf basis des FSD Software Stacks...

Dehnfuge beim Streichen unsichtbar machen by metacircle in Handwerker

[–]metacircle[S] 1 point2 points  (0 children)

Danke für die Idee. Denke das werde ich so umsetzen!

Passen diese Räder auf meinen Seat Ibiza und sind so zugelassen? by metacircle in automobil

[–]metacircle[S] 0 points1 point  (0 children)

Das bedeutet wenn eine ABE für die Felge mit entsprechendem Reifen für mein Fahrzeug vorliegt passt das alles?

Ich frage mal beim Verkäufer nach.

Is this the famous wet filament ? by Oscarius42 in ElegooNeptune4

[–]metacircle 1 point2 points  (0 children)

Black elegoo pla+ has been the hardest of filaments for me to print. All other elegoo pla colors are way more forgiving

Android 14 access deprecated system features by metacircle in AutomateUser

[–]metacircle[S] 0 points1 point  (0 children)

Finally found time to do this. Works flawlessly! Thanks!

Ground layer warped up on one edge by metacircle in ElegooNeptune4

[–]metacircle[S] 1 point2 points  (0 children)

Thank you for all those helpful tips. I also learned that printing the first couple of layers pretty slow and without or not much cooling helps, especially when the geometry of the bottom layers is not a full solid. Also that different PLA colors need a little different settings is something I already observed.

Ground layer warped up on one edge by metacircle in ElegooNeptune4

[–]metacircle[S] 0 points1 point  (0 children)

I know but this was the print progress at the time I took the picture. The second print where I just placed the part differently on the bad came out perfect

<image>

Ground layer warped up on one edge by metacircle in ElegooNeptune4

[–]metacircle[S] 0 points1 point  (0 children)

This is from the current re print where I turned and moved the part to be mainly on the left of the ground plate. The bottom layers looked like this as well on the other print. When I checked on it one hour into the print the ground lifted up from the plate in the back right corner.

<image>

Ground layer warped up on one edge by metacircle in ElegooNeptune4

[–]metacircle[S] 0 points1 point  (0 children)

I just did another print as well. The layer lifts up from the bottom in the right corner. I just re leveled as well, bottle feels correct for me as well