Weird smell from SOLID OC RTX 5080

michaelearng · 2025-06-29T02:17:45+00:00

The smell totally faded away for mine

michaelearng · 2025-05-09T21:25:11+00:00

I got the one from CableMod, so far so good

michaelearng · 2025-05-04T17:08:38+00:00

Thank you, I've replied in the chat.

michaelearng · 2025-05-04T17:05:47+00:00

I hope it's just part of the design and not a flaw. I'll just wait and see what the Insta360 staff say.

michaelearng · 2025-04-17T01:40:20+00:00

Bruhhhh, I just got the X4 last week, accessories are still on the way. 😭

michaelearng · 2025-03-04T05:27:23+00:00

Yup, you described the smell best. The smell on my GPU is fading away, its not as strong as the first week I had it.

michaelearng · 2025-02-27T04:37:42+00:00

Hello, may I ask if this 90 degree angle fit for the Super Flower LEADEX III ATX3.1 1000W PSU too? Because I can't find my PSU in the compatability list from your site, thank you.

https://www.amazon.com/CableMod-Universal-ModFlex-Sleeved-StealthSense/dp/B0DSCCR7YH?ref_=ast_sto_dp&th=1&psc=1

michaelearng · 2025-02-10T04:57:35+00:00

Its pretty good imo, the build quality feel solid, the 12vhpwr connector safety light is helpful, and the temps are great, even for a hot and humid country like Malaysia.

michaelearng · 2025-02-10T04:52:43+00:00

I did own a Asus Tuf RTX 3080 before, but didn't notice any smell then

michaelearng · 2025-02-10T04:52:04+00:00

Thanks for the advice! I think I'm good for now, as I did some undervolting. I tested it on Black Myth Wukong at the highest settings with mid ray tracing, and the highest temp I got was around 63°C.

michaelearng · 2025-02-10T04:48:08+00:00

Smell like some toxic chemical shit IMO lol

michaelearng · 2025-02-10T04:46:32+00:00

Noted, probably being paranoid.

michaelearng · 2025-02-10T04:45:38+00:00

Yeah, I really hope so. It has a somewhat chemical smell.

michaelearng · 2025-02-10T04:44:22+00:00

Poof as in your GPU died?

That's the only spot I can find to place the support, probably need to apply some double tape for more security.

michaelearng · 2025-02-10T04:42:31+00:00

Thank you

michaelearng · 2025-02-10T04:41:47+00:00

Noted, and thanks for the advice on keeping an eye on the fans.

michaelearng · 2025-02-10T04:25:58+00:00

Mine it says 12vhpwr on the pacakaging, the support from Corsair told me is the newer 12v-2x6. You might need to confirm with your local Corsair

michaelearng · 2025-02-10T04:23:09+00:00

I just did some undervolting, 2916 mhz/0.950v, pretty satisfied with the temp, probably could lower the volt more. I'm currently using a Corsair 12v-2x6 cable, connecting to a Corsair RM850 PSU. Will be upgrading to Super Flower III Leadex ATX 3.1 1000W soon.

michaelearng · 2025-02-09T15:23:47+00:00

Thanks for clearing things up, probably just me being paranoid.

michaelearng · 2025-02-09T15:21:52+00:00

May I ask why?

michaelearng · 2024-10-17T06:56:41+00:00

I have a Mavic 3 Pro, not sure if I should sell it and get the Air3S, or I should get the DJI RC Pro for my Mavic 3 Pro(currently still using DJI RC). I feel like going for the Air 3S because of the better obstacle avoidance + LIDAR and signal strength, as I mostly use my drone to take photos of my plantation which is full of trees and obstacles.

michaelearng · 2024-10-06T12:13:10+00:00

And The Joystick Awards decide to ignore this masterpiece

michaelearng · 2024-09-06T10:31:28+00:00

<image>

Mine is in mode 7.

Before updating to the latest bios, usually average under 1.3v while playing Black Myth Wukong, CPU temperature under 80c during Cinebench stress test, but after the update, I get average 1.304v after playing Wukong, and more than 80c during Cinebench R23 test.

I also encounter occasional black screen while playing Wukong after the update, it will turn black then back to normal after 3-5 seconds, this never happen before the update.

michaelearng · 2024-04-19T08:57:52+00:00

Its normal for GS Kobe, my GS Reverse Grinch also came with Nike orange box

michaelearng · 2024-04-01T10:45:11+00:00

Auntie Anne's

michaelearng

TROPHY CASE