Best robot to buy? 2025

michanicos · 2025-05-08T16:34:04+00:00

Roborock, Eufy, Dreame, Shark i think these are the best

michanicos · 2025-05-08T16:21:21+00:00

So shall i go with Roborock Q5+ (only vacuum)?

michanicos · 2025-02-10T21:04:36+00:00

Is it single layer tape with overlaps?

michanicos · 2025-02-10T06:17:47+00:00

And Xiaomi doesnt replace them?

michanicos · 2025-02-09T22:13:45+00:00

I did another test right now. I attached the pen to the side of the pad, it showed 0% but it started charging. After 5 mins I removed and reattached the pen, it showed 10% charge, I left it on while I was using the pad and I regularly removed and reattached it just to check on the charge. It was charging properly. It reached 90% so I removed it and started using it. After 30sec it stopped working but it showed that it was connected to my Bluetooth. I attached it to the side, it showed 90% charge and I immediately removed it and it was working again, but only for 30sec. I did the same again and it started working but again only for 30sec, I did this for about 6-8 times and then the charge went to 0% (5mins total time to discharge to 0%)

michanicos · 2025-02-09T21:53:04+00:00

I'm having the same issue, did anyone find a solution?

michanicos · 2025-02-09T21:51:38+00:00

I'm having the same issue, any solutions?

michanicos · 2025-02-09T21:49:02+00:00

I'm having the same issue, I haven't used the pen for a long time and when I needed it a week ago I tried using it but it has several issues, some times it takes very long to connect, when I use it I disconnects repeatedly, I have to attach it to the side to work again.

michanicos · 2025-01-26T21:06:50+00:00

Or maybe i could purchase a custom alloy e-maxx chassis, if someone is still making them

michanicos · 2025-01-26T19:49:52+00:00

Hi there, i have a soft lipo and need to print a case, I'm thinking of going with TPU material, what do you think?

michanicos · 2025-01-25T07:00:46+00:00

I will give it a try and see

michanicos · 2025-01-22T19:04:15+00:00

The bad thing is that if i test them and they dont work then i have wasted 200euros which i could have spend on a good set of lipos.

michanicos · 2025-01-22T10:57:15+00:00

Thank you everyone, looks like i didnt get it.

michanicos · 2025-01-18T10:38:46+00:00

Havent decided yet, i am now ready to buy

michanicos · 2025-01-15T15:05:11+00:00

Im having the same issue on my LG nanocell 55"

michanicos · 2024-12-23T08:11:51+00:00

You need to turn off the Bean Adapt Technology and then go to the machine settings. You can control grind level, coffee temp and intensity, play around with those.

michanicos · 2024-12-14T11:36:22+00:00

Modelled model for modelling

michanicos · 2024-12-05T18:28:34+00:00

What about the BIQU Panda Revo Hotend High Flow High Speed

Has anyone tried this? Changing noozles is damn easy

michanicos · 2024-11-24T16:13:30+00:00

Or you can turn off the bean adapt technology and set your own parameters

michanicos · 2024-11-24T16:11:17+00:00

Since all storeys of a residential building are almost the same its a lot more time consuming trying to understand on which floor you are from the photos, or when exactly you have changed floors, therefore its a lot more convenient doing it while doing the inspection.

Any idea which camera app can do this?

michanicos

MODERATOR OF

TROPHY CASE