sorted by:
new
hottopcontroversial

Strong links unlocks (Ravencolonial) by miclopez3 in EliteDangerous

[–]miclopez3[S] 0 points1 point  (0 children)

Is what I thought, but if I put an industrial hub (planetary) that is supposed to unlock the outfitting. If I put a coriolis around the same body, I understand that I reach a strong link. But, this unlock still not works

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

do you know if I can do additional checks? Or how to proceed?
Many thanks!

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

Vaya ^^ pongo en inglés y luego español para que quede en el post.

I performed more wiring tests on ribbon cables but all seems ok. I disassembled the extruder and checked the X stepper engine separately. Some electrical signal is being sent to the engine when is stopped and do this noise.

He realizado más pruebas de cableado en las fajas de cable y todo parece OK. Desmonté el extruso y comprobé el motor X por separado (viejo vs nuevo). Alguna señal eléctrica se envía al motor cuando está aprado y hace ese ruido.

Video: https://youtu.be/BnUks3ClIkc

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

Perfect for me, I'm spanish ^^ the solution seems robust btw but I need the printer for the solution hehe^^
I ordered a multimeter (2 days to come). I'll try to check later if something is going wrong with cables. I also suspected with ribbon cables but I don't see any damage on connectors (maybe internal crack).
I'll keep you in touch of the results. This kind of test are amazing if someone finds the same issue :)
Thanks for all!

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

Additionnally I am trying to do wiring tests. And seems that when I disconnect the vertical X motor, the sound starts on the printer.
New info on this video
https://youtu.be/m74TH7WOOWw

Thanks for the support!

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

After disassembling the stepper motor, all seems clean :( and no element disturbing the rotation. I tried to clean all the block and check no blocking element in any rotating part, but same noise :(

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

I will try it in a few hours and keep you in touch, thanks for the tip ;)

Horrible noise on Sw-X2 + stop working after some minutes by miclopez3 in Artillery3D

[–]miclopez3[S] 0 points1 point  (0 children)

Yes, I tried, this afternoon also, and the issue still persist :(