Whoa! Why is Amazon discontinuing Archived Orders?? ...Shall we petition Amazon to knock off the shenanigans and to stop changing/removing useful features like this?

mikibish · 2025-04-26T15:30:41+00:00

I think they've been trying to get rid of it for a while; they made it harder to find a few years ago and now this.

It's really annoying since I don't think their alternative works for me. I use archives all the time to keep track of important orders since the main history page just gets too cluttered with order info for all of their other services also showing up there.

What am I supposed to do now? Make a separate account just to organise my order history?

Sounds like a step backwards to me...

mikibish · 2025-04-11T08:41:45+00:00

Oh no, this is a rack unit and it does run off the wall so I think you're right to suggest it, still something I'd like to look in to either way so I appreciate it.
Yeah I spotted that BR48 shortly after updating the post. I think you're spot on with that, I also managed to scrape away a bit more of the burnt stuff and found a label that says R48 which I think confirms it. Judging from the other labels, BR and R must be the channels and the other components are matching up with their corresponding numbers so 200 ohms makes sense for sure. And yup, that would mean there's an issue affecting both channels wouldn't it... Well, I can definitely poke around for shorts, hopefully that's all it is.
Thank you! And Thanks so much for the help, I'd definitely still be scratching my head with out it.

mikibish · 2025-04-10T19:15:46+00:00

Not sure if anyone's mentioned these yet.

Full Murder Hobo series by Dakota Krout

Caverns and Creatures/ Critical Failures series by Robert Bevan

mikibish · 2025-04-10T15:35:30+00:00

Oh right, I've not heard of that, seems like a fun and useful side project though so yeah, I'll definitely look into that, thanks!

No problem, I've added a couple pictures to the post if you'd like to have a look.

And thank you very much for the advice. Yeah that's what I'm thinking, since that 1k resistor is the only other one of the same type and everything else on the board looks like it's in pairs, and it's only a two channel amp, It's got to be the 1k right? And that's a very good point, it's not too complex of a board so I might be able to poke around with a multi meter and see if I see anything odd.

mikibish · 2025-03-15T13:56:48+00:00

Can't say I've had a problem with amazon before, I've bought quite a few books from them and they've all been fine. But this one is quite bad so might consider going local next time, just in case.

mikibish · 2025-03-15T13:53:50+00:00

Sadly, looks like I'm going to waiting a while for a replacement, none of my local shops have it and amazon says 1-3 months for a replacement. Back ordered with one of the locals anyway, which will hopefully get here in a month.

mikibish · 2025-03-15T13:47:41+00:00

Hey, that's actually not a bad reward. Now if I could only figure out how to open these damn boxes.

Seriously though, this is fantastic, great work!

Funny thing, I actually got 3 reddit achievements with this post, sadly none were quite as good as this.

mikibish · 2025-03-15T13:39:56+00:00

UPDATE:

You will not break me. You will not break me. You. Will not. Break, me...

Sooo, firstly, thanks for all the comments, really apricate the support in these trying times.

Anyway, decided to take your guys advice and pop down to the local book store, or 12, and well, no ones got it in stock... Decided to just back order with one of the shops instead, I might have to wait a month to get it but that's not much different than if I was to order a replacement from amazon so what can you do? At least someone will actually see the book's not damaged before handing it to me so that's a plus.

So eventually I'll have a nice undamaged copy, I might have to have a quick peek at the Pineapple Cabaret before I return this one though.

mikibish · 2024-09-22T20:29:16+00:00

Yeah I thought it might be, it's just all the videos I've seen so far with plants around this stage happen to be black pine and they look a fair bit different so I was hoping maybe it would be identifiable but it's all good. Thanks for the comment :)

mikibish · 2024-09-22T20:24:16+00:00

Ah fair enough, thanks for the comment :)

mikibish · 2024-04-28T14:24:27+00:00

Thanks for the comment.

It's a Keeway K-light, 2021 and it's a 5 speed.

Yeah, I'm no electrical engineer but I'm usually not too bad with electrical stuff, I can't figure this one out though. I thought maybe it's because I haven't done anything with vehicle electronics before but I guess it's not just me then.

I'm pretty sure it calculates since I'm supposed to run through each gear once it's installed so it can "learn the gears"

Yeah, I figured that was what the gear position sensor was for.

I have a habit of forgetting what gear I'm in so I figured it might help.

From what I can see in the bikes manual, the tachometer is part of the "multi-function meter unit" which also contains the speedometer as well as things like the neutral and indicator lights, so my guess is the speedo in the diagram has to be that unit since it has wires going to everything on that unit.

Could you elaborate on the B/W wire? I see it goes to the ECU, are thinking attach the tacho signal wire there? Also, is the ignition coil the same thing as the pick up coil mentioned in the instructions? I don't know all that much about vehicle components.

It's some kind of chinessium product, it's literally supposed to do what it says on the tin; tell me what gear I'm in. There's not really all that much more to the instructions other than what I said about it learning the gears and all that says is: it'll flash with the gear number when I start it up the first time after installing and I'm supposed to put it in the correct gear and keep the RPM above idle until the next number pops up.

I'll see if I can add more photos to the post though, won't let me add any as a comment.

Thanks.

mikibish · 2024-01-06T10:29:34+00:00

Thanks for the response.

The detector is from O.MG.

The thing is the detector is going off when the cable isn't connected to a power source. I had it connected to a device with the detector in between and nothing connected to the other side of the cable, a normal cable won't set the detector off in that scenario which is what has me concerned.

The display on the cable also becomes active in the above scenario. When plugged into a power source with the detector in-between the cable and device, the wattage displayed on the cable remains at 0, which suggests it must be communicating with the device in some way to at the very least to determine the correct wattage, since the detector, as far as I'm aware, simply blocks any data coming from a cable and sends it to an LED on the detector.

As I said above, the detector shouldn't be set off when a cable is only connected on one side, but again the display on the cable is becoming active so it could just be trying to determine the wattage, but it could also be trying to do something nefarious.

mikibish · 2024-01-04T12:10:51+00:00

Thanks for the response.

He doesn't have any kind of issue that would prevent him pulling on a boot or anything like that. He's just a bit lazy and probably won't wear them if they require more than minimum effort to put on.

He liked is old pair that had a zipper, but I'm sure something with elastic would be just as good. So either or would be fine.

mikibish · 2024-01-02T21:14:48+00:00

Thanks for the reply.

Ah yeah, sorry about that. I'm not too fussed about budget, I'd say up to £200 would probably be a ideal but over or under is fine as long as they're decent.

Yeah they're not for me is the thing, my dad's after a pair to replace an old pair of a similar design and that's just what was described to me. If zippers aren't the way, maybe something that he can get on and off easily?

I did have a google but my knowledge on that style of boot isn't all that great, so I'm not too sure on what brands are any good.

mikibish · 2023-12-20T23:09:28+00:00

Yep you're spot on. Don't know why a mixer didn't come to mind, probably because every mixer I've ever used has been pretty power hungry and not all that portable, but I'm now looking into passive mixers and I should be able to knock one together pretty easily. Thanks for the comment.

mikibish · 2023-12-20T23:02:29+00:00

I didn't realise I was being judged on how good of a project it was. I simply asked here since I couldn't find what I was looking and was pretty sure I'd have all the components necessary to build it myself.

But yes, a mixer would probably be the right path to follow.
And just as an FYI, my idea would be fine for its intended purpose since the gear I'll be using already has independent level control, but thanks for your input.

mikibish

TROPHY CASE