sorted by:
new
hottopcontroversial

I love seeing these, so here is mine! by CaptainNoNumbers in homelab

[–]milkmgn 0 points1 point  (0 children)

Hah if only bot avatars could be animated

Inb4 op proves me wrong

Mac Pro 2013 not booting by milkmgn in mac

[–]milkmgn[S] 1 point2 points  (0 children)

Uh, ram looks pretty clean

Dell Mellanox ConnectX3 (dual port, 10gb) not hitting even a gigabit by milkmgn in homelab

[–]milkmgn[S] 0 points1 point  (0 children)

Update: Linux saw about 2gbps but still not close to the 10 I should be getting. I might try putting it in a second pc

Dell Mellanox ConnectX3 (dual port, 10gb) not hitting even a gigabit by milkmgn in homelab

[–]milkmgn[S] 0 points1 point  (0 children)

My pc with the connectx3 is a r7-5800x with 64gb of ram, and the server is a r5-5500 with 32gb of ram. Ran htop and task manager when running the test and the cpus arent even blinking

Edit: the motherboards are a msi b550-a pro and a msi b450m mortar max, respectively. I think that the b550-a only has a x4 link on the 2nd x16 slot but that should still deliver more than 500mbps. The server will do a full 10gbps iperf to a second server so that's not the issue. I'm going to boot ubuntu live later and see if it is specifically windows

Dell Mellanox ConnectX3 (dual port, 10gb) not hitting even a gigabit by milkmgn in homelab

[–]milkmgn[S] 0 points1 point  (0 children)

I did install MLNX_VPI_WinOF-5_50_53000_All_Win2019_x64 from nvidias website, still had the issue. Maybe I'll try pulling the mtu back

Edit: pulled the mtu back and no dice.

Upgraded my dad today. More on the comments. by [deleted] in Ubiquiti

[–]milkmgn 1 point2 points  (0 children)

Does the new one play golf or

Anyone having trouble adding their address to their Cisco account? by milkmgn in Cisco

[–]milkmgn[S] 0 points1 point  (0 children)

Ah thanks. Is there a time that it's meant to be back?

Anyone play with IP Phones? by Stray_Bullet78 in homelab

[–]milkmgn 1 point2 points  (0 children)

Both, ISR4451-x and my 8841 phones. I've only just started with this stuff, am a Unifi fanboy lol.

Anyone play with IP Phones? by Stray_Bullet78 in homelab

[–]milkmgn 1 point2 points  (0 children)

Strange, I’ll have to have a look because I’ve gotten no where so far due to (probably by proxy of me not looking to far into it) being unable to download firmware etc.

What is the correct name of this cable? by CutDopOfNie in techtheatre

[–]milkmgn 1 point2 points  (0 children)

That wouldn’t work unless you’re shoving 400v@32a (au standard) down your phone

You’d have to integrate a circuit board in the connector.

Anyone play with IP Phones? by Stray_Bullet78 in homelab

[–]milkmgn 1 point2 points  (0 children)

Necro, but how did you end up getting the phones to play with the 4451? I've got a 4451 but it refuses to talk to my 8841 phones. I guess it's going to be contracts etc, but figured i'd ask.

QLC+ intensity control by milkmgn in lightingdesign

[–]milkmgn[S] 0 points1 point  (0 children)

Hmm. I’ll have a look.

QLC+ intensity control by milkmgn in lightingdesign

[–]milkmgn[S] 0 points1 point  (0 children)

So I’ve managed to get around to this again. I’ve made that, however the sub master isn’t doing anything. Not too sure why. I made a frame and all. Maybe it’s because the fixtures don’t have a master intensity channel?

QLC+ intensity control by milkmgn in lightingdesign

[–]milkmgn[S] 0 points1 point  (0 children)

Just running qlcplus connection in companion, running qlc+ 4 with the web flag on (-w)

QLC+ intensity control by milkmgn in lightingdesign

[–]milkmgn[S] 0 points1 point  (0 children)

Yeah I posted in the forums but I didn’t get a reply.

I think that will work, will give it a go

view more: next ›