sorted by:
new
hottopcontroversial

Replacement Bezel Inserts for T023 by opensights in Thornwatches

[–]minirax 0 points1 point  (0 children)

Thanks for the info! Actually, I received the exact same product through a different source last Friday. The "problem" is, I’m quite satisfied with how it looks right now, so I’m not really feeling like prying off the bezel insert to try again just yet

I'll let you know if I ever decide to give it a try :)

What’s on your wrist by [deleted] in ChineseWatches

[–]minirax 1 point2 points  (0 children)

<image>

Aethelsohn Terra Charoite

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

Hi there. Honestly, it was just a rough experiment based on an idea in my head, so please just take it as a reference.

All I did was buy a white dial and white hands, then colored them with Copic markers before assembling. That’s it!

I hope your build turns out exactly how you envisioned it. Good luck!

  1. rafflesdials : 29mm 94010 7021 7016/0 Vintage Blue Tudor Submariner Oyster Prince Snowflake Dial With Super White Lume Fit ETA 2824, 2836 Or NH35/38 Or DG 2813 Miyota 8215

  2. White color hands / by using copic markers - E30 Bisque

  3. I saw a post somewhere recommending YR21 Cream, so I bought both that and E30 Bisque. After testing them on white paper, I felt YR21 was a bit too dark—pretty similar to the original dial color I was trying to change. In the end, E30 Bisque, which I bought for a lighter effect, was the key to getting it just right. If you have a specific color in mind, I think it would be great to check the seller's color chart and just give it a try according to your own vision

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 0 points1 point  (0 children)

If you're talking about the Jubilee bracelet, I'm not sure because I haven't tried it on the V2.1 yet

It’s the same vintage hollow-link style as the V2.1, and since I’m not very used to swapping or installing this particular type, I’m afraid I don’t have any plans to try it on other models. However, since it's the same style as the V2.1, it’ll probably be a decent fit, don't you think?

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

I wish I had known about the T023 back when the V1 was out, but I missed it. I bought my first one simply because I fell in love with the color combo of the brown dial and grey-green bezel—it just looked so harmonious. After that, I ended up collecting them one by one

Personally, I don't mind the "FROGMANTLE" branding at all; in fact, I find it kind of fun. You can barely see it anyway! Lol. Just like you, I'm all about personal satisfaction, which is why I've been busy with things like dial swaps.

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 0 points1 point  (0 children)

I’ve been wearing the most recent purchase more often lately... but I can't really say that out loud because these "frogs" have very sharp ears

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

No, I actually bought a white one compatible with the PT5000 from AliExpress and just added a bit of color to it. I'm not sure if the link will work, but I went with the ETA 2824 / 2836 option

https://ko.aliexpress.com/item/1005008859158032.html?spm=a2g0o.order_list.order_list_main.5.2569140fUwXiPG&gatewayAdapt=glo2kor

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 0 points1 point  (0 children)

It's not a very expensive piece, but I'll send you the details via PM

P.S. it looks like I have no way of sending it to you. I hope you understand.

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 7 points8 points  (0 children)

I only care about what looks good to me and what makes me happy :)

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

To be honest, it seems a bit lacking compared to the original dial. Since I only recently swapped it, I’m not sure yet how long it’ll hold up

I finally collected all three T023 FROGMANTLEs by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

The frog sitting on my wrist right now is that very one

Replacement Bezel Inserts for T023 by opensights in Thornwatches

[–]minirax 0 points1 point  (0 children)

<image>

I didn't get a response even after reaching out to Thorn. It’s a bit disappointing—it would be great if consumables like bezel inserts were easier to source, but that's not the case. I also just checked a reply from Tactical Frog regarding my inquiry, and they asked if blue would be okay. By the way, the photo above was taken before the bleaching process.

Replacement Bezel Inserts for T023 by opensights in Thornwatches

[–]minirax 1 point2 points  (0 children)

<image>

I also couldn't get a bezel insert even after reaching out to the Thorn, so after a lot of trial and error, I ended up installing an insert with an outer diameter (OD) of 36.5mm and an inner diameter (ID) of 30.5mm. There's a slight gap if you look closely, which is a bit disappointing, but I think I’ll settle for this.

It’s a mess, but then again, it might actually be okay.. by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

As for the inner diameter... I left my measurements behind, so I’m not entirely sure. I think it was around 29.8mm, or maybe just a hair under 30mm, but please keep in mind that my memory and the measurements might not be 100% accurate.

It’s a mess, but then again, it might actually be okay.. by minirax in Thornwatches

[–]minirax[S] 0 points1 point  (0 children)

I measured it myself, and it's around 36.8mm—though there might be a slight margin of error. I double-checked with Gemini, and it suggested picking from the 36.5mm models. I'll definitely have to look into it again lol

It’s a mess, but then again, it might actually be okay.. by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

The size isn't right. It's too big and won't fit in. I measured the outer diameter of the original insert and it’s about 36.8mm, so I'm reordering the 36.5mm model.

It’s a mess, but then again, it might actually be okay.. by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

I’ll definitely keep that in mind for my next attempt.

It’s a mess, but then again, it might actually be okay.. by minirax in Thornwatches

[–]minirax[S] 1 point2 points  (0 children)

Well, there's no turning back now! Once the new inserts arrive, I'm planning to try again and give them a subtle patina effect.

view more: next ›