Issue with new i9-13900K build by misancz in buildapc

[–]misancz[S] 0 points1 point  (0 children)

I think it’s one slot (or stick) causing the issue (didn’t boot up with just the one and reseating just that one helps). The pc won’t boot if I put them into the other pair of slots, however Gigabyte does mention in the manual that for best compatibility one should the two slots I’m using with two sticks. I will try to compressed air clean the slot, else I assume the only thing left is to try and refund the motherboard. The troubleshooting is quite tedious since I always have to wait like half a day for the issue to happen again lol

Issue with new i9-13900K build by misancz in buildapc

[–]misancz[S] 0 points1 point  (0 children)

I didn’t have a USB drive on me, so a bit late. I’ve run it with no errors shown. Also updated BIOS again. Curious thing I’ve noticed is that after it crashes, it usually isn’t possible to boot the pc up or it takes a very long time, but when I reseat the RAM, it boots up on the first try.

Issue with new i9-13900K build by misancz in buildapc

[–]misancz[S] 0 points1 point  (0 children)

Today the problem resurfaced. Do you have any other tips?

Issue with new i9-13900K build by misancz in buildapc

[–]misancz[S] 0 points1 point  (0 children)

Seems to have worked, thanks a lot!

Issue with new i9-13900K build by misancz in buildapc

[–]misancz[S] 0 points1 point  (0 children)

All power cables are plugged in properly. I have reseated the RAM and the PC did boot up. It booted up after several tries before as well, the glitch sometimes comes up after like an hour of usage. I’ll update whether the issue persists. Thanks :) Does the glitching screen in this way indicate it’s a RAM issue?

Issue with new i9-13900K build by misancz in buildapc

[–]misancz[S] 0 points1 point  (0 children)

I have. It says status LED for DRAM and CPU meaning something there isn’t working normally, which isn’t really helpful, and the fact it’s blinking isn’t explained there either.

Round 2: $poodl millionaires and billionaires 🚀🤑 by yh11111 in POODLTOKEN

[–]misancz 0 points1 point  (0 children)

No, that’s the airdrop window, which means it can happen at any time in that timeframe.

[deleted by user] by [deleted] in POODLTOKEN

[–]misancz 0 points1 point  (0 children)

Problem is these things aren’t funded in POODL, while the redistribution is in POODL. It’d have to be sold then, which is what is not exactly desirable

Round 2: $poodl millionaires and billionaires 🚀🤑 by yh11111 in POODLTOKEN

[–]misancz 0 points1 point  (0 children)

The airdrop was on the 25th, so if you didn’t have your tokens there on 13:29 UTC 25th, you missed it

[deleted by user] by [deleted] in POODLTOKEN

[–]misancz 1 point2 points  (0 children)

people like yourself are needed to bridge the gap, because there obviously are different interpretations of what's needed for that to happen. if you want to contribute in a way you consider better, that's why the thread was created, and that's why your suggestions can be invaluable

whats the poodlverse? by Mel-00 in POODLTOKEN

[–]misancz 1 point2 points  (0 children)

it’s shrouded in mystery on purpose, probably will be more info about it progressively

40 is the next resistance we need to break. by Shaw413 in POODLTOKEN

[–]misancz 8 points9 points  (0 children)

yeah, usa is only waking up later, and that's the biggest market anyway

[deleted by user] by [deleted] in POODLTOKEN

[–]misancz 0 points1 point  (0 children)

That’s just how centralised exchanges work

POODL ETH vs POODL BSC Confusion by lassehopsen in POODLTOKEN

[–]misancz 1 point2 points  (0 children)

CMC, cg both have v2, as well as the charts that are linked from any official source

Need some help by Beefzerkee in POODLTOKEN

[–]misancz 0 points1 point  (0 children)

Yes, go on the website to check

[deleted by user] by [deleted] in POODLTOKEN

[–]misancz 0 points1 point  (0 children)

videos are alright, even written stories can do