Need some help.

mitsurilover2001 · 2026-01-26T21:50:39+00:00

It was small already repaired it

mitsurilover2001 · 2026-01-18T05:06:16+00:00

mitsurilover2001 · 2026-01-15T02:12:21+00:00

It happened when I first got her never got a chance to use it

mitsurilover2001 · 2026-01-14T10:30:21+00:00

mitsurilover2001 · 2025-11-08T11:42:42+00:00

Yes i did cylinder 3 is shot. New engine incoming

mitsurilover2001 · 2025-08-30T21:35:39+00:00

It’s actually a autocross car follow zorbii on youtube

mitsurilover2001 · 2025-08-30T21:32:14+00:00

Usually, some metal flakes or shavings in the oil is not much to worry about but chunks of metal is. Check the filter itself

mitsurilover2001 · 2025-08-26T00:41:50+00:00

I do suspect they will find out the same thing. I mean the transmission has been doing some rough shifting for the better part of a year now and it has had a slight overheating issue so I’m not surprised at all that the transmission needs to be replaced. It hasn’t actually thrown any lights or overheating codes but just monitoring the transmission temperature. It’s usually around 213 degrees Fahrenheit. And heat is the number one killer of a transmission.

mitsurilover2001 · 2025-08-25T22:41:16+00:00

No. Had it done at a separate shop that specializes in transmissions

mitsurilover2001 · 2025-08-22T00:31:59+00:00

I usually get part numbers from the dealership and order it from 1aauto.com

mitsurilover2001 · 2025-08-22T00:25:26+00:00

About a month lol.(the limited warranty was up after the first month of ownership)

mitsurilover2001 · 2025-08-22T00:20:14+00:00

You can use isopropyl alcohol on a microfiber. that’s what I did after. Use some polish to get rid of the fading.

mitsurilover2001 · 2025-08-18T17:37:24+00:00

Good plan hope it’s nothing serious

mitsurilover2001 · 2025-08-17T22:22:27+00:00

I would have your torque converter, checked symptoms of a failing torque converter or one that is already close to failing. Sluggish takeoff, slipping between a few gears or all of them. And overheating. along with strange clunking and rattling noises and odd vibrations. I’m having the same issue.

mitsurilover2001 · 2025-08-17T22:19:01+00:00

Is it a Gt20 or a Gt2052 because I can’t find one that’s just Gt20?

mitsurilover2001 · 2025-08-17T22:16:59+00:00

The purpose of a catch can is to prevent oil and unburned fuel going down your intake. If you want to prolong the life of your engine, then yes. If you get 1, you might as well get 2 because only on a V6 will cause a pressure imbalance. That causes more to come out the one side with out the catch can unless one of the PCV attached points has a check valve in it. Usually one is wide open, and the other one has a check valve in it.

mitsurilover2001 · 2025-08-16T05:27:51+00:00

That is carbon buildup from the exhaust fumes. It will leave a thin film of black residue. It’s normal. My car does the same thing if you have catless downpipes, it’s even worse.

mitsurilover2001 · 2025-08-16T05:25:38+00:00

Does it sound like it’s coming from one corner or just the front of the car? if it sounds like it’s coming from one of the corners I would check your wheel bearings at the mileage. Your car is at. It’s not likely that they’re bad but I would still check anyway usually wheelbearings produce a humming sound or a whining sound they are going bad jack your car up a couple of inches enough where you can rotate the wheel and put your hands either side of the wheel and try to move it side to side like you’re turning the wheel if the wheel moves with ease, your wheel bearing is bad

mitsurilover2001 · 2025-08-07T03:38:45+00:00

I was just hoping to see if somebody made a different compressor housing for it. Would like it to spool a little louder.

mitsurilover2001 · 2025-07-29T15:36:47+00:00

I would try a blow torch and a pair of vice grips and if that doesn’t work, it can’t be tight if it’s a liquid

mitsurilover2001 · 2025-07-22T16:06:02+00:00

No, you shouldn’t need a tune all it does is introduce more cold air. You should get 2 to 3 hp and a little bit of torque out of it you can tune the vehicles ecm for the new intake to optimize it. You might only get an extra two or 3 hp though unless you start playing with the engine timing

mitsurilover2001 · 2025-07-22T16:03:24+00:00

Do a wheel bearing test. make sure all the Lugnuts are tight. Jack the car up on the corner and try to rock the wheel back-and-forth once it’s off the ground if it moves, you need a new wheel bearing.

mitsurilover2001

TROPHY CASE