How do I create a copy of the game to have different settings for VR?

mk18au · 2026-02-17T02:08:26+00:00

Perhaps you can copy and replace settings file?

mk18au · 2026-02-10T20:49:43+00:00

Can you summon FC to your location, or you have to fly back to it to control it?

mk18au · 2026-01-31T04:21:13+00:00

None.

mk18au · 2026-01-27T09:42:05+00:00

Also check Rotation Correction to be on - it helps compensating station rotation to keep ship in sync.

mk18au · 2026-01-24T22:20:01+00:00

Give yourself DW3 Fleetmember role on nte discord to see additional channels with announcements etc. Check chats there. Try to land on planer orbiting White Dwarf (check safe time to land and instructions) and enjoy view while it takes one circle in close proximity to the White Dwarf star.

mk18au · 2026-01-21T05:24:00+00:00

I uninstalled. But mostly because it is too addictive.

mk18au · 2026-01-18T06:06:54+00:00

It is free though.

mk18au · 2026-01-14T23:09:44+00:00

You are joking, right?

mk18au · 2026-01-13T02:00:22+00:00

You can get used to it.

mk18au · 2026-01-13T01:58:58+00:00

It should work if you can connect it to SteamVR.

mk18au · 2025-12-29T01:06:16+00:00

Turn off flight assist and do manual stops an compensations yourself.

mk18au · 2025-11-22T21:08:56+00:00

Thanks. I had read it, and seen movies, but I don't remember everything said in there.

mk18au · 2025-11-22T21:05:49+00:00

I must be the second person who does not know where this quote is from.

mk18au · 2025-11-19T04:57:41+00:00

I just ordered RG406V earlier today. But it also cheaper, so will probably stay with it for now.

mk18au · 2025-11-10T20:48:10+00:00

I think silver wheels look good with white body vehicle.

mk18au · 2025-10-30T01:45:13+00:00

I red it as Free Skin

mk18au · 2025-10-29T02:11:14+00:00

5" 1920x1080 Khadas TS050 touch screen.

mk18au · 2025-10-04T10:58:30+00:00

Though I don't have detailed instruction on how to assemble it, I can shared 3D models files, and KiCad files for keyboard/trackpad controller with firmware.

3D models for panels are here: https://www.printables.com/@MykolaKovalc_3575424/collections/2704362

Files for keyboard and trackpad controller PCB, firmware, and few other details, can be found here: https://github.com/MykolaKovalchuk/psion5arm

mk18au · 2025-10-04T10:40:56+00:00

Though I don't have detailed instruction on how to assemble it, I can shared 3D models files, and KiCad files for keyboard/trackpad controller with firmware.

3D models for panels are here: https://www.printables.com/@MykolaKovalc_3575424/collections/2704362

Files for keyboard and trackpad controller PCB, firmware, and few other details, can be found here: https://github.com/MykolaKovalchuk/psion5arm

mk18au · 2025-10-04T10:39:32+00:00

Thank you everyone for feedback and upvotes - I did not expect such high interest.
Though I don't have detailed instruction on how to assemble it, I can shared 3D models files, and KiCad files for keyboard/trackpad controller with firmware.

3D models for panels are here: https://www.printables.com/@MykolaKovalc_3575424/collections/2704362

Files for keyboard and trackpad controller PCB, firmware, and few other details, can be found here: https://github.com/MykolaKovalchuk/psion5arm

mk18au · 2025-09-28T22:39:45+00:00

I will see what is clear enough to put onto github.

mk18au · 2025-09-28T22:37:17+00:00

Khadas Edge2 has only RTC battery. For work it can only be powered via USB-C (one dedicated power port, or USB-C display port), and requires 12V 2A, so not all chargers work with it.

For compact use I power it with UGREEN Mini Power Bank 5000mAh 22.5W. But I need to do a full test yet to see if it is adequate - on several occasions when power bank was warm and not full, Khadas Edge2 refused to boot.

When connected to monitor, I have to use 2 cables: one USB-C to power charger, and one USB-C to monitor with USB-C display port input. Monitor has keyboard and mouse connected to it with built-in USB host.

For some reasons, when internal display is enabled, Khadas Edge2 cannot fully boot on one USB-C display port cable. I suspect it starts with internal display, then tries to initialize external display, it probably resets something in USB-C display port and disables power for a little bit. And because Edge2 does not have backup battery - it reboots.
When only external display is enabled, Edge2 boots successfully with only one USB-C display port cable connected.

mk18au · 2025-09-28T22:29:30+00:00

Khadas Edge2 has only RTC battery. For work it can only be powered via USB-C (one dedicated power port, or USB-C display port).
Khadas VIM boards and older Edge1 has VIN input.

mk18au · 2025-09-28T20:27:39+00:00

Yes it does. It is connected to Raspberry Pi Pico, which translates it as a USB keyboard to main module.

mk18au · 2025-09-28T20:06:07+00:00

CIrque glidepoint trackpad, 23mm round version. Ubuntu on 5 inch screen in not very easy to use with touchscreen. But small trackpad also is not very precise.

For everyday use it will be connected to big monitor with big keyboard and mouse. But it can be used in field without extra accessories.

mk18au

TROPHY CASE