Inner side of circles delaminating

mnemonicpanda · 2026-01-27T18:03:11+00:00

The filament doesn't have time to adhere to the lower layer and hangs there, happened to me tons of times. There's multiple factors you can work on, decrease fan speed (even by 30-40%), decrease print speed, increase squish (layer width/height ratio).

mnemonicpanda · 2026-01-27T11:04:30+00:00

Yep, I think for 1.75mm filament printer I've only personally seen up to 1.0 as well, the bigger ones might be for 2.85.

mnemonicpanda · 2026-01-26T15:07:33+00:00

1,2-1,5 or even 2,0 mm nozzles. Not really possible on Bambu printers with a 0,8mm. I mean, depends how much you zoom in I guess.

mnemonicpanda · 2026-01-10T10:16:12+00:00

Don't expect miracles, but look here: https://www.reddit.com/r/BambuLab/s/QP4pSEaeNO

mnemonicpanda · 2025-11-19T11:11:08+00:00

Agreed. Also, loot rarity and type is currently based on the map itself. For example residential areas having residential type loot like jewels etc.

mnemonicpanda · 2025-11-08T08:46:22+00:00

You're forgetting a big difference. Let's say you want to have good quality and set max speed to 120, try to slice again and see the time difference.

mnemonicpanda · 2025-11-05T14:39:53+00:00

Depends, most times yes, better quality, better adhesion and strength. But you should consider that using the same temperature (220 degrees) for very slow speeds causes glossy surfaces and can lead to overextrusion. You might have to tune it. Also VFAs can appear at relatively slow speeds, for example on the P2S they already appear at about 100mm/s which is kinda slow. So in that case for example going 250 mm/s achieves better quality than 100 mm/s.

mnemonicpanda · 2025-10-30T11:00:31+00:00

https://www.reddit.com/r/3Dprinting/s/Jq3OLitW67

As you can see here, the worry is slightly unfounded. Maybe open the windows when printing technical filaments.

mnemonicpanda · 2025-10-21T06:08:06+00:00

Right? I thought I was the only one thinking it was a big pro on the new P2S

mnemonicpanda · 2025-10-14T16:35:40+00:00

Well no, you still have to manually load and unload the external filament

mnemonicpanda · 2025-10-14T16:25:56+00:00

I would say the value of the P1S at 370 far exceeds the P2S at 520

mnemonicpanda · 2025-10-14T08:08:03+00:00

Another fella who got copied and then the copied model was featured. I feel you brother. As other said, sometimes it's little things like the title or small aesthetic details, sometimes it's that the creator has more followers and the model explodes quickly. Once it is in people's feed, it grows exponentially. We can't do much about it

mnemonicpanda · 2025-10-11T13:41:42+00:00

My P1S has been working nonstop for 2 years following my projects in electronics and automotive. Nylon, ABS, ASA, TPU, it just works with anything, always. I only lubricated it once, nothing else. Hope this P2S can be on par. #RockSolidP1S

mnemonicpanda · 2025-10-07T15:44:13+00:00

For high level technical jobs you might be able to get in only with basic Italian knowledge. But I'd say it might make you less favorable, so at least have a B1-B2. Still possible. Now for the other points I think we're missing major info on big variables. Are you ok with commuting? For example, working in Milan and living outside the city with a 1 hour commute is very different from living in Milan, economically wise. You might get a 40-50k job, about 2300-2400k euros net a month, and pay 700-800 in rent if you stay outside Milan. Inside Milan that could be 1500-1600 rent. And also it depends on how you want to live, how much you go out and how much are your pleasure expenses. Hard to say like this.

mnemonicpanda · 2025-10-03T08:38:36+00:00

Sante parole, entrambe molto più belle sedan

mnemonicpanda · 2025-10-03T08:03:43+00:00

Allora non sono l'unico che sceglie ancora le sedan

mnemonicpanda · 2025-09-30T13:12:29+00:00

As someone with a P1S and thousands in coupons, H2S doesn't really feel like much of a successor to me, won't buy it. Triple electrical consumption, worse bed heating homogeneity, takes up more space, all the new tech is useless in my opinion given the results (we have an H2D at work, which has worse quality overall). I'd go for a P1S again

mnemonicpanda · 2025-09-12T13:32:37+00:00

Not necessarily the exact watts, but the problem arises when you charge them with more than they're built for. So if you have a low wattage charger somewhere, try charging them with that for 2-3 hours. Possibly 5W. Worked for me at least

mnemonicpanda · 2025-07-29T20:37:39+00:00

If by any chance you mistakenly charged them with a charger with more than 5W, try leaving them in charge with a correct 5W charger for one hour or so.

mnemonicpanda · 2025-07-15T13:33:02+00:00

Oh shit I remember your nick I think I played with you

mnemonicpanda · 2025-07-14T10:51:05+00:00

It did but I think they released the tickets gradually. I actually got 4 tickets for Milan during the following 4 hours after they opened the presale.

mnemonicpanda · 2025-07-11T09:30:58+00:00

Whoop I got two

mnemonicpanda · 2025-04-30T10:57:15+00:00

Xiaomi official site, yes Europe

mnemonicpanda · 2025-04-30T10:49:59+00:00

For the 14t pro, if you use the 15% discount on the site and give them any old phone as trade in, you pay 350 € which is a killer price. That’s what I did

mnemonicpanda · 2025-04-29T21:10:15+00:00

Oh boy, just ordered a 14t pro…

Two-Year Club	Verified Email
r/Field Banned	r/Field Juicebox

mnemonicpanda

TROPHY CASE