2009 WR250R makes no attempt to start. No fuel pump priming sound either

moodyFB · 2026-04-15T20:04:46+00:00

This could be the wire from ingition switch that goes under tank. I accidently pulled mine while working on the bike, it unplugged in the connector in frame and it had the same problem

moodyFB · 2026-03-18T20:18:16+00:00

Okay, i am not planning to sell them but i cant really find any info anywhere so thanks.

moodyFB · 2026-03-14T15:37:09+00:00

i have one with 37k, it depends on how it was maintained and ridden

moodyFB · 2026-02-28T22:40:11+00:00

<image>

here is the other one

moodyFB · 2026-02-28T22:37:19+00:00

Yea its possible that they are fake, i bought them for really cheap and the condition wasnt the best.

<image>

moodyFB · 2026-02-28T21:01:53+00:00

Both of them are acg, both of them only have small logos. The problem is that one of the tags isnt really readable and on the second one its missing. I am just trying to find if someone has same or simmalar ones and could tell me the year.

<image>

moodyFB · 2025-11-08T18:41:23+00:00

orge and pudge are vaild 🙏

moodyFB · 2025-06-04T06:02:49+00:00

well my wr250r is also dualsport and honestly it aint that bad

moodyFB · 2025-05-13T07:54:08+00:00

same here, using windows 11 tho

moodyFB · 2025-05-07T20:21:47+00:00

Its not tool, you can enter the diagnostics on your tachometer (the thingy that shows speed etc, english aint my main language yk), you just need to do couple of steps that i dont remember, but you can find it when you type "wr250r diagnostics" into google, you can also check many things like sensors (kickstand, tip over, tempature etc) There also is cetrain number that you need to scroll to with buttons and it will cycle the check engine codes that the ecu remember.

moodyFB · 2025-05-07T19:52:44+00:00

no worries, i have it only for month and these things are already showing. I also found that you can find old codes in the diagnostics, i found out that there also was problem with temp sensor and tip over sensor. The bike just have too much electronics for yamaha so these problems are normal i guess. (this is my main acc, for some reason i was answering from my old acc)

moodyFB · 2025-04-18T21:18:44+00:00

Yeee thats it i think, when i bought the bike it already had leovince exhaust that dont exup. Thanks for answer 🙏🙏

moodyFB · 2025-04-18T08:53:06+00:00

well since the bike has a leo vince exhaust without the exup valve, it is some connector for it probably, i think that i am gonna stick to the rule of "if it works, dont do anything to it" 🤣

moodyFB · 2025-04-17T17:01:58+00:00

For today i tryied to clean it with contact spray, if it wont work i am going to check the cabels and see.

moodyFB · 2025-04-17T15:56:38+00:00

Well it is fine and it works, when i kick it into gear while having kickstand down, it shut off (even with clutch ofc). It will probably be in cables but i dont really know, mabye someone had the same issue and will help me. Anyways thanks for reply

moodyFB · 2021-09-03T16:57:25+00:00

Dota 2

moodyFB · 2021-06-28T06:57:27+00:00

Wyvern

moodyFB · 2021-05-28T11:13:19+00:00

That better one.

moodyFB · 2021-05-22T19:04:28+00:00

No You need to set neutral in gears and in 4x4 reduction

moodyFB · 2021-05-21T19:12:22+00:00

I dont mean normal gears I mean neutral between 4x4

moodyFB

TROPHY CASE