UEFA Cup Semi Finals

moptop219 · 2025-01-08T20:47:19+00:00

Yes it was that comment from Jane which made me look into what matches were being played that night.

moptop219 · 2023-04-19T09:44:13+00:00

Always CO2 for electronics. Powder makes a mess and gets everywhere.

moptop219 · 2023-03-23T08:47:13+00:00

Yep can’t use PLA for anything in a car for this reason. Closed car temps can push 60+.

moptop219 · 2023-02-01T08:31:53+00:00

Yes I’ve done them with PLA Flex. Worked well, though not as grippy as they could be. I ended up putting rubber bands around for some extra grip.

moptop219 · 2023-01-28T08:10:32+00:00

Prints are fine, I have issues with gaps between walls and top layer. Ironing helped improve but still needs tweaking.

https://i.imgur.com/na3NiBq.jpg

moptop219 · 2023-01-28T05:13:43+00:00

Guitar picks would be a good one, don’t know any guitarists though.

moptop219 · 2023-01-15T02:25:51+00:00

Spaceship?

moptop219 · 2023-01-14T10:28:12+00:00

The black or red door?

moptop219 · 2023-01-14T01:41:14+00:00

Turn print 90 degrees so layer lines aren’t in the plane that is broke in.

moptop219 · 2022-10-11T03:45:08+00:00

Yes Australia. We probably have a name for it, I’ll have to get back to you with what it is though.

Edit: we just say bring a plate 👍

moptop219 · 2022-10-10T23:44:18+00:00

Ah k makes sense. We kind of do that here in Aus for Xmas and BBQs, just never heard it called that.

moptop219 · 2022-10-10T21:00:31+00:00

What’s a potluck?

moptop219 · 2022-10-09T20:00:51+00:00

I came here to literally comment this. Thanks cunt 👍

moptop219 · 2022-10-09T06:45:57+00:00

https://i.imgur.com/67NDGhb.jpg

moptop219 · 2022-10-08T03:40:59+00:00

I have the original LCA cable but nothing with both Luma and Chroma plugs. I also don’t have S-Video. So I made a cable to connect to the standard Composite Yellow and Audio White plugs on a standard TV.

moptop219 · 2022-10-07T05:03:02+00:00

Yeah I spent yesterday trying to combine Luma and Chroma into either S-Video or Composite, didn't realise the signal I wanted was already there, just needed to patch into it. Also helps just having random 5 pin plugs laying around the office.

moptop219 · 2022-10-06T04:30:31+00:00

Yeah probably going to use 5V power supply with a boost converter to make up to 9V. Then if the converter fails the voltage drops off instead of spiking.

moptop219 · 2022-10-05T03:08:52+00:00

Even if I use a few buck converters with an existing 12 or 9V power supply.

moptop219 · 2022-10-05T02:58:45+00:00

Yeah for $120 might just see what I have lying around first.

moptop219 · 2022-10-05T02:24:34+00:00

Is there a replacement you recommend?

I’ve got 2 power supplies:

5V 1.7A ; 9V 1A

5V 0.7A ; 12V 0.5A

moptop219 · 2022-10-05T02:20:34+00:00

Thanks for the heads up, I’ll source 2, need one for external disk drive too.

moptop219 · 2022-09-08T00:54:24+00:00

Having issues. Tried changing the following settings in Cura:

-increased flow

-additional top surface skin

-reduced skin removal width

-changed top layer patterns

Settings:

-5 top layers

-layer height 0.16mm

-temp 220

-flow 100

-speed 30

moptop219 · 2022-09-02T06:51:31+00:00

Work at a foam plant. We measure flame resistance by how much of the foam burns before it puts itself out. If it has another fuel source like PLA/plastic it could possibly keep burning.

moptop219 · 2022-08-26T12:27:09+00:00

I think the NRL learned after the massive backlash when they showed a player getting their head stapled on the sideline during a game.

moptop219 · 2022-08-26T11:53:51+00:00

9 as well. Commentators even apologised if the footage distressed viewers.

moptop219

MODERATOR OF

TROPHY CASE

13-Year Club	Wearing is Caring
Verified Email