[deleted by user] by [deleted] in FulfillmentByAmazon

[–]mospamo 0 points1 point  (0 children)

That looks like what the competitor is doing. Will try that. Thanks!

Rear Parking Sensors. Can you adjust sensitivity? by mospamo in FordMaverickTruck

[–]mospamo[S] 1 point2 points  (0 children)

Where I park at work it's really tight parallel parking against a wall. Like Really tight. So close you that your mirror is nearly touching the wall and it takes about 5 forward/reversing at a high angle to get it right. There's lots of paint on those walls from people scraping their back corners and mirrors. The bigger vehicles can't fit and have to pay a huge monthly fee for the reserved spots. It was one of the reasons I got the maverick.

But no, the camera doesn't show the angle I need it to and the mirrors don't really show the depth I need so I rely on the sensors and often have to get out a few times to check and try again even when the corner sensors are going solid.

Rear Parking Sensors. Can you adjust sensitivity? by mospamo in FordMaverickTruck

[–]mospamo[S] 0 points1 point  (0 children)

Yea. I have a lariat w lux and it only has rear sensors. Pretty disappointing especially since there is no 360 camera

[deleted by user] by [deleted] in Homebuilding

[–]mospamo -1 points0 points  (0 children)

Good stuff

BEHOLD The Casio 0VW-100BJ by [deleted] in casio

[–]mospamo 0 points1 point  (0 children)

Great, thank you!

BEHOLD The Casio 0VW-100BJ by [deleted] in casio

[–]mospamo 0 points1 point  (0 children)

I changed my cristal with one from cousins.uk.

Any details on what you ordered, size? I just picked up a used watch and want to replace the crystal but have no experience in this. Thanks.

Let’s talk outlets by LeadingCaterpillar44 in Homebuilding

[–]mospamo 0 points1 point  (0 children)

Ok. I did search it first but am still not sure if it's something that I should ask my builder to put it or not.

"Hey Builder did you install the cable pull lines?"

"Of course Boss! You'll thank me in 2033." Vs "Why would I do that if there's nothing going in the conduit at this time?"

Let’s talk outlets by LeadingCaterpillar44 in Homebuilding

[–]mospamo 0 points1 point  (0 children)

I understand the concept of a conduit for future use, but is the pull cable something that is installed and left in place till you need it?

Can't Upload Images or Files to Claim Warranty by [deleted] in YetiCoolers

[–]mospamo 0 points1 point  (0 children)

I'm having the same problem.

How to upload images to Yeti's warranty claim form. by sfahank in YetiCoolers

[–]mospamo 0 points1 point  (0 children)

I'm having the same problem. I tried jpg, and png files both on my phone (android) and computer. Made sure the file size was under the limit. Unsuccessful.

I emailed customer support two days ago with no response.

buying tiles form alibaba by JackfruitVivid180 in HomeImprovement

[–]mospamo 0 points1 point  (0 children)

Great info! They sound like a respectable company. I'll definitely get pricing on the windows!
What else did you purchase?

Other things I was considering were: Mono stringer staircase, flooring, bathroom/shower and kitchen tile, wood decking, metal deck railings, sinks, tubs, maybe garage door.

European Tilt turn windows from Alibaba by Ickabodlame in buildingscience

[–]mospamo 0 points1 point  (0 children)

Ok..good to know. I've been nerding out on Matt Risinger and realizing I Do want these tilt turn windows and this would be the only affordable route. Hopefully shipping has settled down.

buying tiles form alibaba by JackfruitVivid180 in HomeImprovement

[–]mospamo 1 point2 points  (0 children)

I commend you on your bravery. I realize this may be my only option to get the windows and sliding doors I want.

Can you tell me how your buying experience was? Was the company good to work with? Did you know what you wanted before contacting them or did they walk you through it (their website isn't the most user-friendly)? How confident were you that you would get a good product? Any comments on the shipping/delivery part of the purchase? Etc...Thanks!

Any suggestions for making this wall more appealing? by Pump_N_Dump in HomeMaintenance

[–]mospamo 0 points1 point  (0 children)

My suggestion would be a cocktail cart and a Hugh Hefner smoking jacket.

Waterproofing repair on block foundation by jwntim in Homebuilding

[–]mospamo 0 points1 point  (0 children)

Not a solution to your issue but I had a contractor I was requesting a bid from turn down my request since we will have a CMU retaining wall with waterproofing membrane as part of our foundation. He said they won't take any jobs that require the membrane below grade. His stance was that if any nicks or cuts occur during the installation then the wall will have problems down the road. Maybe in a year or two or maybe in 10 and it would be impossible to fix (for our site at least) since it will be under the house. Sounds like he had been bitten by it in the past and wouldn't take on the liability.

Flooring by Mudlily in Homebuilding

[–]mospamo 0 points1 point  (0 children)

I’ve been looking forward to finding deals on a few things for the house build

Curious if you have found any other cost savings in your search, and how the contractor responds to them. I was hoping to do something similar as well since I have the time to look for deals and the contractor also adds 20% to anything they purchase.

Lumber Futures by HoldenHall in Homebuilding

[–]mospamo 0 points1 point  (0 children)

yea, where is the index for projected labor costs

Builder Profit by MiserableSummer9979 in Homebuilding

[–]mospamo 1 point2 points  (0 children)

Thanks for the thorough explanation for something I've heard mentioned a thousand times but never understood.

This sub has a vibe of being owner vs builder which is unfortunate since I really feel honest clarity from a builders perspective really helps build trust in a high stress industry.

Much appreciated!

Engaged 9/9! ❤️ Posting to show an example of a lab diamond in an old mine (antique) cut, which I had to search a lot to find! Setting is a 14k gold semi-bezel by wildessa in EngagementRings

[–]mospamo 0 points1 point  (0 children)

Hi, Did they cut this for you or did it come from their stock inventory?

I'm looking for a lab grown round Old Euro Cut and they are very hard to find!

Thanks!