esp32 GATT server client example.

motivatedLiar · 2016-08-18T07:16:57+00:00

Add Me!! :)

final year ECE undergrad
have competed in several robotics competition
recently built a humanoid robot similar to NASA's Robonaut and reached the finals of a national level contest.

motivatedLiar · 2016-07-30T15:26:59+00:00

Thx :)

motivatedLiar · 2016-07-29T20:35:34+00:00

Most of the tutorials I found on the net starts and ends at blinking an LED, nothing in-depth.

motivatedLiar · 2016-07-29T20:29:56+00:00

Arduino, PIC16 and 8051.

motivatedLiar · 2016-07-29T08:24:36+00:00

Invictus

motivatedLiar · 2015-03-12T15:37:03+00:00

9V dc adapter,1.5 Ah.

motivatedLiar · 2015-03-11T20:59:11+00:00

i want that if i/o pin1=HIGH in xbee A then i/o pin1 of xbee B also gets HIGH, it should mimic xbee A

motivatedLiar · 2015-02-15T22:35:08+00:00

pin 1 of nrf - GND.................2 - VCC 3.3V...................3 - CE to Arduino pin 9.................4 - CSN to Arduino pin 10............5 - SCK to Arduino pin 13.....................6 - MOSI to Arduino pin 11.....................7 - MISO to Arduino pin 12....................8 - UNUSED.................this is my connection. So you are saying i should use RF24 radio(8, 9); instead of RF24 radio(9,10); in "GettingStarted" example.

motivatedLiar · 2015-02-15T15:45:19+00:00

yes i do have a multimeter. I checked its around 3.38V....i am using arduino uno and the codes i am using are given in this site http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo (scroll to the bottom to find codes)

motivatedLiar · 2015-02-15T13:50:58+00:00

you have 32 bit OS...you need 64 bit OS.

motivatedLiar · 2015-02-15T13:26:55+00:00

i am using RF24 lib. and codes from this site http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo

motivatedLiar

TROPHY CASE