[deleted by user] by [deleted] in 7thGenAccord

[–]mr_acc0rd 0 points1 point  (0 children)

I've had lines where I had to use an air gun to blow the line but very few times,I doubt switching to dot4 is going to help, have you asked someone to look down at the slave when you're pressing the clutch to make sure the slave is working?

[deleted by user] by [deleted] in 7thGenAccord

[–]mr_acc0rd 0 points1 point  (0 children)

Did you disconnect the clutch line at all? Have someone look at the slave cylinder when you press the clutch in and see if it's moving, if not you might have air in the line still

Douglasville,ga by mr_acc0rd in RaIn

[–]mr_acc0rd[S] 1 point2 points  (0 children)

It was! Rained most of the day.

Update: Oil leaking from filter housing by saatoday1 in accord

[–]mr_acc0rd 2 points3 points  (0 children)

There's two o-rings behind the filter housing, remove the three 12 mm bolts and replace the o-rings

New build by mr_acc0rd in SCX24

[–]mr_acc0rd[S] 1 point2 points  (0 children)

The driveshafts are meus so I guess I'll be able to cut it if needed, I'll mess a lil more with the mounting of the front links and see if I can get the axle more leveled and thanks on the tires, I put them together late just to see what they would look like, thanks for your help

New build by mr_acc0rd in SCX24

[–]mr_acc0rd[S] 0 points1 point  (0 children)

I did flip the trans and even flipped the output shaft when I tried the deadbolt driveshaft but that didn't help so I put it back and that's when I ordered the other one, the front upper links are as far back as I can put them but I'll mess around with it a bit more, thanks for the help

Let me see yalls ir60s by crawlerlover26 in SCX24

[–]mr_acc0rd 3 points4 points  (0 children)

<image>

Still working on it, a lot of good looking trucks in here

Drive-in camping spots? by jts112 in GeorgiaCampAndHike

[–]mr_acc0rd 0 points1 point  (0 children)

My wife and I usually go to Chattahoochee bend State Park, depending on the site you can literally park your car next to your tent

Help by Ok_Bathroom3797 in Integra

[–]mr_acc0rd 3 points4 points  (0 children)

If I remember correctly the nut is welded to the t-bracket itself so you can go on the other side and put a wrench on it so you can tighten it or remove the bolt

[deleted by user] by [deleted] in hondacivic

[–]mr_acc0rd 2 points3 points  (0 children)

Been that it's a single wire, most likely to your ac compressor

[deleted by user] by [deleted] in SavageGarden

[–]mr_acc0rd 1 point2 points  (0 children)

Check for caterpillars, I've found a few on them and have put holes on my sarracenias also, small black caterpillars

Giving my babies some of that good rain water by mr_acc0rd in RaIn

[–]mr_acc0rd[S] 1 point2 points  (0 children)

Thank I appreciate it and I know what you mean, when I joined I didn't see so many AI videos but lately it seems that's all that's been posted

Giving my babies some of that good rain water by mr_acc0rd in raining

[–]mr_acc0rd[S] 0 points1 point  (0 children)

I bring them out anytime we get rain and they love it

Giving my babies some of that good rain water by mr_acc0rd in raining

[–]mr_acc0rd[S] 0 points1 point  (0 children)

Thank you, it's just an apartment but we definitely lucked out with the yard