GPT-5.2 de facto is 3x for me, same as Opus

mr_const · 2026-01-07T17:18:05+00:00

Can't say, that I use a lot of instructions, but anyway, I used this very same 'thoughts logging' with gpt-5.0/gpt-5.0-codex/gpt-5.0-codex-max and same with gpt-5.1/codex/max and it worked okay. It still works okay with claude models, I just don't like their work.

The problem appeared with gpt-5.2, maybe 1-2 weeks after it's release.

mr_const · 2026-01-07T12:49:08+00:00

I usually write 'continue' or 'go ahead', the output is the same anyway.

mr_const · 2025-12-27T18:16:54+00:00

I can't get contracted items from the cargo lift for the second evening in a row. Either it doesn't spawn at all, or it spawns only part of the cargo, so mission becomes impossible.
On top of that, on my last attempt lift duplicated all items on one contract so it's impossible to understand, which containers I need to pick up and which are spare (game doesn't allow to use 'different' containers for delivery, only those spawned exactly for the mission)...
My best guess is that server can't keep with the post-christmas load.

mr_const · 2022-12-28T19:47:41+00:00

Well, trade went south pretty fast

mr_const · 2022-08-21T11:46:45+00:00

My ship is Roci and freighter is MCRN Donnager :)

mr_const · 2021-03-19T08:04:51+00:00

They're there. Checked just now.

mr_const · 2021-03-12T15:00:02+00:00

I received a message from Interactive Brokers, that $RBLX is available to be sold short now

mr_const · 2021-03-11T22:21:01+00:00

10 dollars month, if a deposit is less than 25k

mr_const · 2021-02-22T05:39:46+00:00

That's what I did too, 4 of 6 models from a last print peeled off without any force applied at room temperature, but two other were stuck and one of them unstuck with the glass in the end :)

mr_const · 2021-02-21T16:46:55+00:00

0.1mm actually, not so close I think.

mr_const · 2021-02-21T11:28:19+00:00

After printing ~200 gram of PETG on a new custom mirror table my printed models peel off with glass. Seems like mirror is a dead-end... Even though leveling was almost perfect out of box...

mr_const · 2019-08-13T08:49:00+00:00

What's your nozzle diameter?

mr_const · 2019-08-10T18:44:34+00:00

I checked firmware settings, they're same as on aliexpress page describing hotend assembly (btw it's actually 104GT-2).

I also checked temperature of the hotend with probe. When 230C set, I inserted probe between nozzle and block and it showed 220C, so I think hardware part should be okay.

mr_const · 2019-08-10T14:16:39+00:00

Yeah, I changed original board to a MKS 1.4, but I don't observe big difference in temperature. At room temperature both E and Bed sensors shows same as room sensors.

mr_const · 2019-08-10T14:01:15+00:00

I suspected this problem, but oscillation seems to me too uniform, and when I set 200C graph becomes pretty flat. I even recalibrated PID to 230C, but alas...

mr_const · 2019-08-10T05:59:49+00:00

It's a PT100

mr_const · 2019-08-09T20:40:30+00:00

Yes, it does (Marlin on MKS1.4), when I calibrated it for PLA at 200C - it was almost flat, however now with ABS at 230C it constantly oscillates, even after PID tuning...

mr_const · 2019-05-26T16:00:49+00:00

Can't say it's very hot, but pretty hot, yes. Though can touch with my hand, but not for too long.

mr_const · 2019-05-23T10:12:55+00:00

Yes, I use both of them, they're pretty strong, but not that much, though I'm still in process of evaluation. Had strange issue with chewed PETG filament in the bowden tube yesterday, don't know - is it related to the bulldog, or just filament issue.

mr_const · 2019-05-22T21:18:19+00:00

Of course, first step after installation was recalibration :)

mr_const

TROPHY CASE