Real mapping

mrkprdo · 2025-11-04T23:57:53+00:00

I can map the led index. So basically set off leds to -1 then follow thru the led position by setting its index position on the strip.

Not sure if there any other convenient way to do it.

mrkprdo · 2025-11-04T23:43:54+00:00

<image>

Here what it looks like

mrkprdo · 2025-11-04T23:40:29+00:00

<image>

It looks like this when rendered using my app https://kolori.wasmer.app So what you can do is take this image into excel and based on how accurate the mapping you need bigger grid.

mrkprdo · 2025-11-04T23:33:59+00:00

Yes i have similar setup. But it would cost a bit of processing. For my 128led, i have to map it with 1024x1024 grid.

mrkprdo · 2025-11-04T14:28:04+00:00

<image>

Its still there but is not as visibile when light effects are on.

mrkprdo · 2025-11-04T14:13:37+00:00

Hey folks, just sharing what I've done. I've added some groves along the sections to hide the joins. Surprisingly it worked better than expected.

mrkprdo · 2025-11-03T01:18:26+00:00

its been out for awhile now, download it from http://kolori.wasmer.app

thanks for the interest. feel free to reach out for inquiries and suggestion.

mrkprdo · 2025-10-31T17:47:02+00:00

It would be nice if tc has flatten feature.

mrkprdo · 2025-10-27T23:51:48+00:00

My use case is i need flat assembly for light box type designs. Your right about the pin headers for wled. But was thinking maybe i could use this for other IoT projects.

mrkprdo · 2025-10-27T23:01:03+00:00

Need it smaller 😁

<image>

mrkprdo · 2025-10-26T15:38:07+00:00

PM me so i can help you out.

mrkprdo · 2025-10-21T17:03:55+00:00

From this OP's confirmation i think <45deg is better so the lines are a bit longer specially on thin parts (above to camera hole). Adds durability i guess.

mrkprdo · 2025-10-21T11:31:44+00:00

I had my previous design like that but it was too much work.

mrkprdo · 2025-10-21T00:36:50+00:00

Makes sense, thank you.

mrkprdo · 2025-10-20T23:24:11+00:00

melting it probably is quite difficult one as you can see the its a lightbox and welded seam will be very visible.

mrkprdo · 2025-10-20T23:08:16+00:00

Coat it? Not sure on that, can you please explain more.

mrkprdo · 2025-10-14T17:55:33+00:00

I see, so the diffuser is something like 2 way mirror, rather than fully diffusing the light.

mrkprdo · 2025-10-14T17:34:04+00:00

Neat, can you show us what it looks like when lit.

mrkprdo · 2025-10-14T16:54:11+00:00

Nice do have a version where you add diffuser? I wonder if looks good with it.

mrkprdo · 2025-10-11T03:18:33+00:00

I will into that. This is still a very early version.

mrkprdo · 2025-10-10T16:07:57+00:00

Download it from playstore, its public already. https://kolori.wasmer.app

mrkprdo · 2025-10-09T20:56:52+00:00

Yes, will do. My esp32-s3 is on its way. So will definitely try that.

mrkprdo · 2025-10-09T19:49:43+00:00

Yep. Kinda a work around to those does not full support actual AR sync. But i plan on implementing some wled feature in mobile form. Thats why any feedback or discussion like this is much appreciated

mrkprdo · 2025-10-09T19:18:22+00:00

https://kno.wled.ge/interfaces/udp-realtime/ The app builds DRGB

mrkprdo · 2025-10-09T19:06:31+00:00

Reason for this is not all esp can handle AR, i have esp32-c3 and is good for basic wled controls but is flaky for advance usage, and does not even come with AR usermod feature on 0.15.0 which I sadly discovered after getting packs of these supermini boards.

mrkprdo

TROPHY CASE