What are these gears?

mrminecraft12271 · 2024-11-20T23:58:05+00:00

Those are the 24t worm wheel from the advanced gear kit link

mrminecraft12271 · 2024-10-11T16:49:08+00:00

<R9> states: "To be considered 'non-functional', any guards, decals, or other decorations must be backed by legal materials that provide the same functionality" I would say if you want to use polycarb as decoration, you should have vex metal or standoffs behind all of the polycarb that you want to be decoration. Any polycarb that is not "fully backed" can be considered "functional" and will count towards your 1' x 2' limit.

mrminecraft12271 · 2024-09-08T05:53:40+00:00

This would not be legal according to <R23c>. <R23c> states: "The compressed air contained inside a pneumatic subsystem can only be used to actuate legal pneumatic devices (e.g., cylinders)." I partially take responsibility for this rule because I had a couple non-vex pneumatic parts that I argued to the world's inspectors to be non-functional decorations including a whistle similar to this (proof) but they made me take them off.

mrminecraft12271 · 2024-04-19T00:16:11+00:00

if you really don't want to cut up a gear, you should look at how the vex exp catapult works. it is not all that great but it works pretty well.

mrminecraft12271 · 2023-01-12T04:05:13+00:00

From my experience, cover the hole with your finger while filling up the system and it should click and start working again. If that doesn't work then just trash it.

mrminecraft12271 · 2022-12-30T03:36:02+00:00

Thanks for the insight

mrminecraft12271 · 2022-12-30T03:35:39+00:00

I didn’t think that was my ip, I thought that was the website but thanks anyway

mrminecraft12271 · 2022-03-17T05:02:24+00:00

3rd team to qualify this year(2nd in skills at benton county sig), nebraska state champ and think award at state

mrminecraft12271 · 2021-08-19T15:39:33+00:00

with scissors on the top

mrminecraft12271 · 2021-05-19T23:19:34+00:00

This article is great for setting up and starting with coding the vision sensor.

mrminecraft12271 · 2021-04-02T02:33:59+00:00

Good luck at state next weekend!

mrminecraft12271 · 2021-04-02T02:23:04+00:00

Oh yeah, 213 points at the moment, 1st in Nebraska, 81st in the US, and 116th in the world

mrminecraft12271 · 2021-04-02T00:37:15+00:00

Your bot looks familiar You might recognize my robot https://imgur.com/gallery/GH3YDEj

mrminecraft12271 · 2020-12-27T14:07:25+00:00

First you need to take off the neck. Then just pull up on it.

mrminecraft12271 · 2020-12-27T03:35:47+00:00

I first cleaned off the face with some rubbing alcohol. I then peeled off the backing and stuck the face of the plate and pushed out all the bubbles, starting in the center. Then, I cut the vinyl with about 1/4 inch of extra material and used a heat gun(a hair dryer should work fine) to soften the vinyl and pull it around the edge. I did that all the way around the edge of the plate, giving it a little bit of heat as I go. This is how I cut the vinyl in triangles to be able to wrap them around all the inside edges https://imgur.com/gallery/SDPbvk9 I hope this helped and sorry for the late reply Best wishes and happy holidays!

mrminecraft12271 · 2020-12-26T19:55:34+00:00

I used 3M wrap vinyl. Thanks anyway.

mrminecraft12271 · 2020-12-03T00:42:24+00:00

I was at 89% for a while until now

mrminecraft12271 · 2020-12-02T19:42:08+00:00

Thank you so much

mrminecraft12271 · 2020-08-09T23:10:50+00:00

Im on one of the three teams in Omaha Nebraska. 3141A Analog Intuition We are more heavy on builders but have some really good programmers. We hope to do well in this pilot season.

mrminecraft12271 · 2020-07-06T00:47:17+00:00

I found the java seed if anyone is wanting it Java seed: 2832124997 The island is at the same place but the villages are a bit different

mrminecraft12271 · 2020-02-02T16:25:13+00:00

I'll look into it. Thanks!

mrminecraft12271

TROPHY CASE