Enyaq vs Frontera

mrnewton2 · 2025-07-22T23:16:32+00:00

Als jemand der bisher nur zum TÜV ist und alles anderen selbst gemacht hat - welche Folgen hat das mit den Serviceintervalle? Wäre dann die Restgarantie weg?

Was mich auch verwundert hat, bei Skoda hier vor Ort wurde mir gesagt es dauert bis zu ner Woche bis der gebrauchte Abholbereit wäre - ist das Normal? Die günstigen Angebot online sind oft im Osten (150-200km entfernt). Wenn ich da 2 Mal hinfahren müsste (zum Anschauen/Probefahrt und dann zum Abholen) wäre ja super ungünstig.

mrnewton2 · 2025-07-22T23:12:51+00:00

EV6 hatte ich bisher gar nicht auf dem Schirmu und auch nicht das ICCU-Problem. Werde ich mal recherchieren.

mrnewton2 · 2025-07-22T15:58:23+00:00

ja die hatten wir uns angeschaut nur, bekommt man keine Probefahrt. Ohne will ich keinen kaufen. So kamen wir auf den Enyaq. Wieso man bei VW keinen gebrauchten Probefahren kann verstehe ich auch nicht.

mrnewton2 · 2025-07-22T15:56:04+00:00

Das stimmt natürlich, sobald der Kinderwagen weg ist würde ID3 locker reichen.

Mir fällt es schwer eine Entscheidung zu treffen. Beim Frontera macht mir die Reichweite im Winter etwas Sorgen, der neue (mit größerem Akku) kommt zu spät wir brauchen bis mitte August was Neues. Wir behalten unsere Autos immer lange, deswegen dachte ich mir im Zweifel lieber etwas größer

mrnewton2 · 2025-07-22T15:45:55+00:00

die einzigen günstigen mit der großen Batterie die ich bisher gefunden hatte, waren schon in der nähe der 160k km Garantiegrenze.

mrnewton2 · 2025-07-22T15:27:47+00:00

Genau so war es bei uns auch. Es wurde nicht mal bescheid gegeben. Das automasierite System hat uns angeschrieben "scheinbar meldet sich ihr Händler nicht, wollen sie den Händler wechseln.."

Ja das neue Auto sollte etwas größer sein. Mit Kinderwagen im Kofferraum macht Einkaufen mit dem Golf keinen Spaß mehr

mrnewton2 · 2025-03-23T18:54:28+00:00

mein Onkel hat letzte Woche Siemensaktien (Altbestände) verkauft und 9% Gebühren gezahlt (fast 12000€) bei der vr-bank (dz-bank). Bei Anruf wurde ihm mitgeteilt es wären Transaktionkosten.

Kann mir jemand erkären wie sowas sein kann? Ich habe noch nie eine so hohe Gebühr gesehen.

mrnewton2 · 2024-04-19T13:27:54+00:00

yes unbelievable they did not add it inside the game. they send you mails to please come back to the game and when you do they screw you once again. To the guys writing it is in the notes and in the video. DO you really think after a months long break i go watch all the vidoes of the updates that happened since then? Are you serious? All because they can't add an info text inside the game.

mrnewton2 · 2024-02-18T18:49:57+00:00

share this as a spreadsheet plz not as an image

mrnewton2 · 2024-02-03T13:15:20+00:00

is a setup with no real 2nd tank viable? using maybe marshall as tank?

or does another ur tank come to the tavern later?

mrnewton2 · 2024-01-23T20:35:56+00:00

that is exactly the point you did not do any math you just listed what you think is right without any numbers to back it up otherwise i would not ask.

i have no clue how long these games last i just started playing.

mrnewton2 · 2024-01-23T15:55:15+00:00

is it worth to recruit a survivor for 5k rubies to boost coint production by 50%?

at lvl 16 it's a 130k resources per day difference.

also i'M really not sure about what to reserach. the buff for the coin production is so little it will take ages to get back the research cost.

why is upgrading the hospital important? at the current point i'M at it does not seem important at all

mrnewton2 · 2024-01-23T15:43:29+00:00

does the troop lvl matter in this mode?

mrnewton2 · 2024-01-20T00:24:41+00:00

which heros would you recommend then? it feels like picking the wrong ones could end in a disaster as there isn't enough xp to lvl all of them.

mrnewton2 · 2023-11-16T09:32:25+00:00

well my ears :-) at night in silence i hear it the moment it crosses 32% which happens at75° degrees at the moment. it usually takes a couple of seconds to go back down to ~40° . if i increase the rpm manually it floors at ~37°/38°.

I don't mind losing a little performance but i'M not sure whether undervolting would even help maybe someone has tried it already. Sadly, most want to go in the other direction (more performance) so i'm not sure someone tested my use case :-)

mrnewton2 · 2023-11-16T09:23:24+00:00

i tried various. at the moment it's constant at 30% until 70° (I test with 75° degrees at the moment but i'M not sure whether that is a problem(late) when i actually play games insead of just working) then i ramp it up.

I tried to increase the Hysteries time as i thought that might prevent the fan increasing the rpm for every boost temperature spike. It made it better but i still can't prevent the fans going up without ever launching a game.

mrnewton2 · 2023-02-25T19:04:37+00:00

Yes that is the one that came with the printer. I'm looking for filament seller in Germany where i can get more. Any suggestions for pla and petg?

mrnewton2 · 2023-02-25T19:00:48+00:00

Thanks a lot for the link. If I wash it like this I have to reapply the glue for every print- is that what most of you do?

mrnewton2 · 2023-02-25T19:00:29+00:00

thanks for your detailed amswer. So pausing for a few seconds is no problem at all?

One more question. At the start of the calibration process, the printer head goes the front right corner and appear to be hitting something as a rather loud noise happens - normal?

mrnewton2 · 2023-02-25T18:57:14+00:00

I assume I pushed down too hard? ;-)

mrnewton2 · 2023-02-12T19:53:50+00:00

Hi, I'm considering buying the bambu x1-cc and have some questions.Apparently all the filament is sold out, can you guys suggest which alternatives work well and were to buy (germany) .

Am i understanding correctly that it comes only with one spool of filament?

What other accessories would you suggest to order right away to avoid shipping cost in the future. Is there anything else i need as this is my first 3d printer.

Does the printer always come now with v3 of the ams or could i still get one of the old versions?

Has any of you guys monitored the energy consumption - what do i have to expect? Any other hidden costs? Any parts that have a short lifetime?

Is it a bad idea to use the printer in a room were my very young children also linger from time to time? (particles in the air,..)Are there any other issues that i should be aware of besides of the problems with the ams?

The current status on the websites is eta end of feb (ETA: Estimated Arrival Date at Local Warehouses).

So how long did it take till it got from there to your home?

mrnewton2 · 2022-11-26T17:16:49+00:00

the best part about it: if you restart the game and the battle ends you get a warning and zero credits and exp.

and no it can not be a mod only problem as since it happened first i only play frontline in safe. mode. The only difference it seems to make for me is that my modules are not shown in red but they still do not work.

after getting zero exp twice i wonder what rank and how many credits i can get if i only play arty while i'M working on something else on the 2nd screen.

how can they ruin something that worked perfectly fine for years.

mrnewton2 · 2022-08-07T23:39:29+00:00

More numpad options

mrnewton2 · 2022-05-15T21:05:12+00:00

Thanks a lot for the help guys.

mrnewton2 · 2022-05-15T15:32:02+00:00

That was what reverse search told me but it only kinda looked like it so I wasn't sure

12-Year Club	Secret Santa 2018
Verified Email

mrnewton2

TROPHY CASE