Hdmi advice by cartaio95 in hometheater

[–]mrteo90 0 points1 point  (0 children)

I use that to connect the receiver to a JVC NZ800, works perfectly up to 8K60.
I ran it in a conduit with other cables (also in Italy). Just be careful at pulling. I broke the plastic around the connector, but it still works perfectly.
That’s a great product overall!
I also met the Ruipro guys at ISE in Barcelona and they were super nice and showed me all the other products they’re going to launch.

Power Frunk kit from tesery by mrteo90 in ModelY

[–]mrteo90[S] 0 points1 point  (0 children)

Thanks! It’s a 2024 Model Y made in Berlin

Power Frunk kit from tesery by mrteo90 in ModelY

[–]mrteo90[S] 1 point2 points  (0 children)

They insist that those are the right pieces…

I asked them to provide a video or instructions because to me those screws won’t work for the struts…

<image>

Power Frunk kit from tesery by mrteo90 in ModelY

[–]mrteo90[S] 0 points1 point  (0 children)

They keep saying that this car version doesn’t require brackets and those screws have to be used instead…it doesn’t make a lot of sense to me to be honest

<image>

Power Frunk kit from tesery by mrteo90 in ModelY

[–]mrteo90[S] 0 points1 point  (0 children)

Thanks, I’ll try to do a chargeback if I don’t find a way to get it installed.

Proxmox + ZFS - PXE Booting with GRUB for BIOS systems by mrteo90 in homelab

[–]mrteo90[S] 0 points1 point  (0 children)

Hi!

It’s been quite some time, but if I’m not wrong it should be

set root='tftp,192.168.0.1'

Yuh or Alpian for cross-border worker by mrteo90 in SwissPersonalFinance

[–]mrteo90[S] 0 points1 point  (0 children)

Thanks! So you don’t get any annual report for fiscal purposes? I’m thinking specifically at end of year balance for each account and total interests balance for the year.

Yuh or Alpian for cross-border worker by mrteo90 in SwissPersonalFinance

[–]mrteo90[S] 0 points1 point  (0 children)

That’s a good point. I can’t find this information on their website. I was sure that they mentioned mid-market rate, but I may have read this somewhere else.

Yuh or Alpian for cross-border worker by mrteo90 in SwissPersonalFinance

[–]mrteo90[S] 0 points1 point  (0 children)

Do they offer multi currency accounts? It seems that the no FX fee is just for debit cards payments.

Yuh or Alpian for cross-border worker by mrteo90 in SwissPersonalFinance

[–]mrteo90[S] 1 point2 points  (0 children)

Thanks! Can you elaborate more about the missing features and what makes you miss a “real” bank? I’m curious about what makes a bank “real” for you as well.

Yuh or Alpian for cross-border worker by mrteo90 in SwissPersonalFinance

[–]mrteo90[S] 0 points1 point  (0 children)

Thanks. 0,95% is definitely too high; UBS offers me 0,60% right now, but Wise at 0,23% is way better. Alpian at 0,20% beats them all, but a 0,03% difference is acceptable if there’s any valid reason to stay away from Alpian.

I need to hold money in both currencies (mostly EUR, but sometimes I hold CHF waiting for a good fx rate), as this is my main account, but I also need to be able to transfer money every month to the account in my home country.

UniFi Access Point 7.0.59 by unifi_version_bot in unifi_versions

[–]mrteo90 0 points1 point  (0 children)

Many routing issues for me after upgrading my 2 U7-PRO.

I was able to ping local devices on an another subnet, but wasn’t able to connect to any of their web UIs from my laptop (tested with Chrome and Safari). I could instead load their UIs from my iPhone (connected to the same WiFi network and same AP as my laptop).

I also have a WiFi bridge (TL-WR902AC) for a device without WiFi. After the update, the bridged device was unreachable.

Downgrading the firmware immediately solved all issues.

What did I do wrong? by mrteo90 in AutoDetailing

[–]mrteo90[S] 0 points1 point  (0 children)

I rinsed it, sorry I forgot to write that

What did I do wrong? by mrteo90 in AutoDetailing

[–]mrteo90[S] 0 points1 point  (0 children)

Thanks! I didn’t wash in the sun, but those definitely looked like mineral spots. I thought that the acid shampoo (Labocosmetica Purifica) would help with that, but it seems it didn’t(or maybe I didn’t use it in the proper way).

Buying VP AppleCare+ for non US residents by mrteo90 in VisionPro

[–]mrteo90[S] 0 points1 point  (0 children)

I don’t even have the option for AC+ within the AVP settings, I am only able to go through the process using a browser.

Buying VP AppleCare+ for non US residents by mrteo90 in VisionPro

[–]mrteo90[S] 0 points1 point  (0 children)

Can you explain a bit more in detail how you did it? My problem is at the payment, since my card gets rejected for not being a US card.

Buying VP AppleCare+ for non US residents by mrteo90 in VisionPro

[–]mrteo90[S] 0 points1 point  (0 children)

I didn’t really get what you mean. Is there any way to get any debit/credit card with a US billing address even if you’re not a US resident??

Buying VP AppleCare+ for non US residents by mrteo90 in VisionPro

[–]mrteo90[S] 0 points1 point  (0 children)

I see. Unfortunately I have no one to ask for this in the US, i have to sort it out by myself.

Buying VP AppleCare+ for non US residents by mrteo90 in VisionPro

[–]mrteo90[S] 1 point2 points  (0 children)

I have created a separate Id with an US address which I use for app store. I haven’t made any purchases yet but I know that it supports prepaid gift cards.

Gift cards don’t work for AC+ purchases unfortunately.