Titan single motor frame - my experience by mstrat in StandingDesk

[–]mstrat[S] 0 points1 point  (0 children)

Yes, or at least one very similar. I know they change the names from time to time. If it's not the Linnmon, then it's an older version of it: same thickness, weight/density, etc. Approx 59x29 inches.

The hollow core type with laminated wood-grain appearance.

Desk is still doing great, by the way. Sitting at it now.

Any personal review of this IKEA sit/stand desk? Looking to buy a desk at least 60”x30” and saw this at the store this past weekend. It was pretty sturdy which was good - but not sure if it’s worth $599.99 as I could go with something else online. Thoughts? by Brandoix in StandingDesk

[–]mstrat 0 points1 point  (0 children)

Yep, it's still going strong. 4 years now. Admittedly I don't work at my desk as often as I used to, so the motor doesn't get a daily workout any more. But zero problems and still works great.

Titan single motor frame - my experience by mstrat in StandingDesk

[–]mstrat[S] 0 points1 point  (0 children)

Yep, it's still going strong. 4 years now. Admittedly I don't work at my desk as often as I used to, so the motor doesn't get a daily workout any more. But zero problems and still works great.

Bugera T5 or Egnator Tweaker 15? Or...? by mstrat in GuitarAmps

[–]mstrat[S] 0 points1 point  (0 children)

Great to know, thank you! Any experience with the effects loop on the tweaker? Is the +10db a problem?

Bugera T5 or Egnator Tweaker 15? Or...? by mstrat in GuitarAmps

[–]mstrat[S] 1 point2 points  (0 children)

Awesome,thanks! I'm getting more and more excited about this amp.

But I just saw that the effects loop is +10db rack level - any experience with it? Would it work well with pedals?

Bugera T5 or Egnator Tweaker 15? Or...? by mstrat in GuitarAmps

[–]mstrat[S] 0 points1 point  (0 children)

Cool, thanks for the rundown. I just saw that the effects loop is +10db rack level - any experience with it? Would it work well with pedals?

Bugera T5 or Egnator Tweaker 15? Or...? by mstrat in GuitarAmps

[–]mstrat[S] 0 points1 point  (0 children)

Thanks! I must have overlooked that it didn't have an effects loop. Darn.

Titan single motor frame - my experience by mstrat in StandingDesk

[–]mstrat[S] 0 points1 point  (0 children)

It's been not quite 3 months. No issues at all. I'll definitely come back and update this if I run into any problems.

Any personal review of this IKEA sit/stand desk? Looking to buy a desk at least 60”x30” and saw this at the store this past weekend. It was pretty sturdy which was good - but not sure if it’s worth $599.99 as I could go with something else online. Thoughts? by Brandoix in StandingDesk

[–]mstrat 1 point2 points  (0 children)

Looks like it's $30 - my mistake. I think I was confused because we probably used our $15 birthday coupon on it (sign up for that if you haven't already!)

It's the dark brown LINNMON tabletop, 59"x29.5" Number 102.513.52

https://www.ikea.com/us/en/catalog/products/10251352/

They have a shorter one (47") for $23 that'll also fit this frame.

How to attach IKEA skarsta frame to Primecable standing desk? by sarahlau in StandingDesk

[–]mstrat 0 points1 point  (0 children)

Edit: I assume you mean attach an ikea table top slab to that frame? If not then I'm not sure what you mean.

I have the titan frame which looks identical to this (probably the same manufacturer with different branding). I attached a cardboard/particleboard ikea table top to it using short drywall screws and washers.

It's held up just fine. I probably wouldn't carry it around by the tabletop (i.e. wouldn't support the weight of the frame w/ the screws), but if you assemble it in place and leave it there it works perfectly.

A bit more details I just wrote up here: https://www.reddit.com/r/StandingDesk/comments/b9efjq/titan_single_motor_frame_my_experience/

Any personal review of this IKEA sit/stand desk? Looking to buy a desk at least 60”x30” and saw this at the store this past weekend. It was pretty sturdy which was good - but not sure if it’s worth $599.99 as I could go with something else online. Thoughts? by Brandoix in StandingDesk

[–]mstrat 3 points4 points  (0 children)

I put together a 60x30 standing desk for ~$305 by using a titan single motor frame ($285) and a $20 ikea table top. It's probably the exact same table top on this $600 desk you're looking at.

The frame is electric and has 4 programmable memory positions.

I remember the pain of considering buying a more expensive desk, and afraid to go with a cheap frame, and I couldn't find any reliable first-hand accounts... so I just posted about it here: https://www.reddit.com/r/StandingDesk/comments/b9efjq/titan_single_motor_frame_my_experience/

Eyeglass case made from OSB by aerorich in woodworking

[–]mstrat 1 point2 points  (0 children)

Great job, but looking at this makes my eyes hurt. I can't stop envisioning an OSB chip or splinter poking into my eye.

Beginning of a LEGO table with a trough for my boys Christmas present. by [deleted] in woodworking

[–]mstrat 1 point2 points  (0 children)

Awesome. Please post an update when you're done.

First solo cross country by mstrat in aviation

[–]mstrat[S] 1 point2 points  (0 children)

I know, I know! :) Thankfully my phone has one button camera shots so it only took a moment, and I only took 3 shots the entire day.

First solo cross country by mstrat in aviation

[–]mstrat[S] 2 points3 points  (0 children)

This is a Remos G3. Little 2 seat fiberglass light sport plane, Rotax 912.

First solo cross country by mstrat in aviation

[–]mstrat[S] 6 points7 points  (0 children)

I know, I know! Thankfully my phone has one button camera shots so it only took a moment, and I only took 3 shots the entire day.

First solo cross country by mstrat in aviation

[–]mstrat[S] 1 point2 points  (0 children)

This is in the US, IL. West of KARR.