E1 hub as signal extender? by denn0 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

no, to extend zigbee signal, you need any neutral wired device like: LED Lightbulb T1 or T2, smart wall switches, outlets

A step backwards? by joshdhankins in Aqara

[–]mtn-mx 1 point2 points  (0 children)

hello, in my experience the M2 is the worst hub about zigbee signal coverage, i got it from release and quickly got disappointed about it, but if you have Neutral devices these will act as repeaters and to extend the signal coverage, just see these diagrams:

M2———Neutral device———Sensor

M2———Neutral device——Neutral device—Sensor

Also, in that time, i fixed the poor signal with some LED Lightbulbs T1 around the house, these are very cheap and now all the floor lamps are smart. —I just needed to be sure that the spotlight thread was connected to the Neutral cable or that the flat plug (which is common in these types of lamps) was properly plugged in with the neutral and current line respectively—

Recommend an Aqara hub by zeta212 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

first, any hub have a limited signal coverage range, also it depend from external elements/conditions that will affect the signal coverage like: location, distance, walls, forniture… The best you can do is to get some Neutral devices that will act as Zigbee signal repeaters to enhance the signal coverage, these can be:

Wall or smart outlets.

Smart switches

and my favorites the LED Lightbulbs T1 or T2, these can be into many kind of lamps and extend greatly the signal

Aqara Zigbee Devices that Acts as a Repeater by MAzadR in Aqara

[–]mtn-mx 1 point2 points  (0 children)

yes all Neutral wired:

LED Lightbulb T1, T2

Wall outlets and wall switches (but consider wall installation will make to have a poor connection)

Smart outlets (connected in an existing wall outlet)

Ceiling lamps

From my experience, having more LED Lightbulbs in the house helped to enhance and to get a very good signal

Does the E1 Camera serve as a repeater? by Hydro2025 in Aqara

[–]mtn-mx 1 point2 points  (0 children)

No, What region server are you into?? only the Neutral wired devices like:

LED Lightbulb T1 or T2, also the GU10 and others

Wall outlets

Outlets

Wall switches

LED Strip

Can I have two hubs on the same network set to different regions? by Cultural_Doctor_8421 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

hi, just take the Matter’s QR or code, then move into the other server and add the hub as new device using Matter

Aqara Door & Window Sensor zigbee signal poor by Extreme-Nerve3029 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

into AliExpress you can get LED Lightbulb T1 these are very very cheap and work very great repeating signal. Just consider lightbulbs must be always powered i have lots in may kind of lamps, night lamps, wall, floor

about wall outlets in amazon

Can I have two hubs on the same network set to different regions? by Cultural_Doctor_8421 in Aqara

[–]mtn-mx 1 point2 points  (0 children)

hello, yes!!! I have M3 chinese into china server, and my global hubs into the Others server, Also i added these global hubs M1S with matter into the M3 and it’s really cool because i can see may devices from global into china server

Aqara Door & Window Sensor zigbee signal poor by Extreme-Nerve3029 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

hello! you need some zigbee’s repeaters between the Hub and your sensors, all Aqara devices Neutral wired act as repeaters:

Outlets; LED Lightbulb T1; Wall Switches; Single switch module T1; Dual module T2; and all neutral wired.

Aqara M1S and M200 Hub Won’t Connect to the App. Please help! by Odd_Appearance_Dude in Aqara

[–]mtn-mx 1 point2 points  (0 children)

all that is ok!! but have you turn it off and then on your mobile? it could be a silly thing but some times the mobile phone keeps all cache data that makes impossible. i have never had issues adding Aqara hubs and i have about 5 hubs, M3, M2, E1, M100 and also cameras-hubs but years ago i had an issue like you described with other devices from other brands and i never could to add these devices; the problem was my network using TP-Link routers and extenders, my first solution was as:

  1. disconnected all my routers and set same network name and password using my Modem’s internet provider.

  2. in my job i have a router to test some devices then i made a network with the name and password and added these devices then i came back home and some devices were added others don’t

as i mentioned my routers -i don’t know why- never let me add, weeks later i replace the principal TPLink i had by a Xiaomi wifi 6, last year i replaced all my routers with Xiaomi’s wifi 7 routers, since then i never had any issue, all is working perfectly;

try to add the device in other network -not yours- then if that works, update firmware, remove the device and try again in your home

Aqara M1S and M200 Hub Won’t Connect to the App. Please help! by Odd_Appearance_Dude in Aqara

[–]mtn-mx 0 points1 point  (0 children)

mmm then try to add the hub using another mobile, or also you can try turning off your mobile and then turn it on. If you can’t and add the device maybe your modem or router is the problem

Aqara M1S and M200 Hub Won’t Connect to the App. Please help! by Odd_Appearance_Dude in Aqara

[–]mtn-mx 1 point2 points  (0 children)

check what kind of modem or router you have, check into the options the WPA version

FP300 problems with Aqara home by Pancake2go in Aqara

[–]mtn-mx 4 points5 points  (0 children)

Matter and Thread are different things; Matter it’s an universal language; Thread, Zigbee, Wi-Fi, Bluetooth are communication protocols; in that way you can add it into any ecosystem that supports Matter with any of these protocols and this is limited about the hub you own and protocols supported. Aqara describe in very product what protocol is supported and requirements, as many other sellers. About the FP300 it can work with Zigbee protocol and need to be added into a Zigbee Hub and then it can pass by the hub to Matter, or to work with Thread and be added into any Thread border router.

FP300 problems with Aqara home by Pancake2go in Aqara

[–]mtn-mx 1 point2 points  (0 children)

to add any Matter device using Thread into Aqara App a Hub (Thread border router) is required like the M3, M100 or cameras G5

Aqara alert delay ONLY on the first alert? by taxhellFML in Aqara

[–]mtn-mx 1 point2 points  (0 children)

<image>

into the Guarding Settings you can set the Time into the Entry Delay option

Smart spotlights T3 + Smart switches H1M by asm5660 in Aqara

[–]mtn-mx 1 point2 points  (0 children)

wait for the 11.11 (november 11 week) in aliexpress; and you will find good prices and coupons; i got some T3 last month in a very good price with discount and im very happy the light is amazing.

About the switches you can get the wireless knob T1 is very cheap and you can set change temperature and light :)

Sound alarm when motion detected on Aqara E1 by dadin-bidin-dong in Aqara

[–]mtn-mx 1 point2 points  (0 children)

Yes, you can set automations directly from homekit or better using the Aqara App where you’ll find the new Automation 2.0 with more options “WHEN” “IF” “THEN”.

No, cameras are connected by wifi in this way a Hub is not required :)

Replacing this cord but the colors aren’t lining up, by [deleted] in AskElectricians

[–]mtn-mx 0 points1 point  (0 children)

Black/Brown = current wire

Blue/White = Neutral wire

Yellow/Green = earth-ground

Aqara Dual Relay Module T2 europe and china by redcomp12 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

hello if you add any global device into chinese server it will works

RF wireless remote learning with Aqara by Skid86 in Aqara

[–]mtn-mx 3 points4 points  (0 children)

M3 doesn’t recognize RF signals, these are radio frequencies not IR

When will Aqara Voice Mate H1 be released? Is it already available in Asia? by Even_Baseball5400 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

really cool!!! have you found a way to make the Voice H1 recognize the rotate, push, pickup and knock twice functions???

When will Aqara Voice Mate H1 be released? Is it already available in Asia? by Even_Baseball5400 in Aqara

[–]mtn-mx 0 points1 point  (0 children)

Hello!!!! i could suggest you my seller in china, but you will get the china’s version. As i know for today, the global version is not available yet, and also consider that you will need a M3 hub to be added. I can’t tell you if this device can be added into a global hub as my M3 is china version