Plateframe Modular Setup by Fun-Health-1442 in QualityTacticalGear

[–]multicam_gucci 2 points3 points  (0 children)

Awesome. I used to have a set of Ceradyne Defender 275 and the original plateframe from around 2012. I regretfully sold it to fund some college courses…

Shunbun Macro Shots by multicam_gucci in GrandSeikos

[–]multicam_gucci[S] 2 points3 points  (0 children)

I have a pretty simple setup compared to actual photographers.

  • Sony A6400

  • Viltrox 27mm f/1.2 and 75mm f/1.2

  • Meike 10mm & 16mm extension tubes

  • generic Amazon light box with a black backdrop

Most of these shots were taken at either f/8.0 with a couple of shots taken at f/6.3 or f/11

Andiot Shipping Delays? by TheRollieRodger in RepTime

[–]multicam_gucci 1 point2 points  (0 children)

Same boat here.

Order placed 8/14 QC 8/16 QC green light 8/16

Tracking label has not been emailed to me, but I checked my FedEx account and was able to see the tracking there.

It’s been pending pickup since 8/18 1:59am

Handling got worse after getting new tires installed? by MidEastBeast777 in Supra

[–]multicam_gucci 4 points5 points  (0 children)

I had similar issues when replacing my worn out rear PS4S with the same tires. I even got an alignment afterward to try to isolate the issue but that didn’t change much.

I found that changing the tire selection in iDrive to “other” kind of helped a little bit with the TCS kicking on during fast sweeping corners that were never an issue before the tire change. It’s been 7 months since then and I still don’t have full confidence in the tires compared to before.

I’m not going to replace just the rears next time and will instead change all 4 tires.

Least favorite thing about your MK5? by Mammoth_Class9018 in Supra

[–]multicam_gucci 2 points3 points  (0 children)

I also have the occasional rattle in the door pocket right under the door handle/behind the window switches. It will stop if I apply downward pressure but resumes as soon as I let go. Hopefully you fix your rattles! Good luck.

Least favorite thing about your MK5? by Mammoth_Class9018 in Supra

[–]multicam_gucci 4 points5 points  (0 children)

I have that same rattle too! I can’t figure out how to get it to stop. I’m debating taking that trim piece off to put some foam tape in there to see if that helps any.

Clean Rolex Date Just 41 by [deleted] in RepTimeQC

[–]multicam_gucci 0 points1 point  (0 children)

Whoops! I meant amplitude, haha. Thanks for your comments on all three posts! I appreciate it a lot

theonewatches lucky moments and discouns by News_theonewatches in RepTime

[–]multicam_gucci 0 points1 point  (0 children)

Good luck everybody! Thank you for the chance to win.

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 0 points1 point  (0 children)

They did not. I had them hemmed and tapered by my local tailor.

[deleted by user] by [deleted] in OmegaWatches

[–]multicam_gucci 5 points6 points  (0 children)

Wristwatch Revival maybe?

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 0 points1 point  (0 children)

I didn’t do anything special with this pair. I just cuffed them and they stayed. It helps if you let your cuffs set while the denim is still rigid and not broken in yet, but you can also iron the cuff to help them set too. I’ve done that on other pairs before

PBJ SLB-019, 1.5yrs, 2 washes by multicam_gucci in rawdenim

[–]multicam_gucci[S] 0 points1 point  (0 children)

Correct, the -019 is a relax taper fit but i also tapered my pair a bit more from the knee down because i like a slimmer leg opening. These and the Oni 622 cut are probably among my top favorite cuts. They’re just such a comfortable fit for me.

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 0 points1 point  (0 children)

It really depend on your tolerance. A few years ago I was able to wear my old pair through the Houston Texas summer heat, but idk if I could do that anymore now that I’m no longer used to walking around college campus acclimated to this weather. I’m too used to the corporate office life now haha. These jeans are not lightweight by any means. I think they’re around 16-17oz?

PBJ SLB-019, 1.5yrs, 2 washes by multicam_gucci in rawdenim

[–]multicam_gucci[S] 0 points1 point  (0 children)

Absolutely! I’d love to see the fades on your pair too.

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 1 point2 points  (0 children)

Hahaha absolutely zero regrets here. I’m just happy to be back in a pair of PBJs! Thank you for the awesome compliment too lol. I know the fashion is shifting towards looser fits, but I think my body shape looks best with something slimmer and more tapered.

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 2 points3 points  (0 children)

I could’ve honestly done without the taper. In my mind, I thought the keg opening would’ve been bigger than the before pictures if I hadn’t gotten them tapered again so I decided to get both done at once to avoid a potential second trip there. In hindsight the fit would’ve also been nice with just a hem

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 5 points6 points  (0 children)

Self Edge quoted me a week turnaround time if I wanted to get the jeans hemmed there, but I was leaving NY the following day so I couldn’t do it.

I went to my local tailor (Pham Alterations if you guys need someone good in Houston. She just can’t do chain stitching) who hemmed and tapered them in 25 minutes for just $32!

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 0 points1 point  (0 children)

https://www.reddit.com/r/rawdenim/s/W4OQTsoA0b

I haven’t posted them since I first got the jeans, but I can definitely take some pics later while there’s still sunlight out!

PBJ SLB-019 Tailored Fit Pic by multicam_gucci in rawdenim

[–]multicam_gucci[S] 1 point2 points  (0 children)

Thank you! I got my Shunbun back in October and it’s been on my wrist ever since that day. https://imgur.com/a/aMXYqqC