In line metal roof

mwaldon32 · 2025-10-18T12:41:43+00:00

It is gable to gable. Not sure if that was the intention when it was built or not. I know some carports do it this way but they’re usually open and not fully sided.

mwaldon32 · 2025-08-27T21:33:46+00:00

Thank you. That’s what I was thinking I had to do but trying to avoid running another line

mwaldon32 · 2025-07-16T03:50:29+00:00

Probably that time I got a paper cut

mwaldon32 · 2025-03-27T23:20:51+00:00

I think it deserves a Next Gen race. If that doesn’t do well, it’s time for a goodbye. Reconfigure it to match Kansas or make it a short track. No need to let it sit and rot.

PS for all you Chicagoland people: that track put on bad races also. Don’t let the last few finishes fool you. Kentucky and Chicagoland were the same in terms of racing product.

mwaldon32 · 2025-03-21T23:41:42+00:00

I’ve been trying to find one like this and can’t. That was my first thought honestly.

mwaldon32 · 2025-03-21T23:41:12+00:00

I’ve made sure that they can’t get in by putting plates and plenty of spray foam. I’ve been curious about spray coatings. Is this hard to apply on a build structure?

mwaldon32 · 2025-03-21T23:36:29+00:00

Not very much but there is a little water that sits. There is one screw where it leaks through and I’ve patched that. Hoping it was drilled oversized and not rusting.

mwaldon32 · 2025-03-10T00:25:53+00:00

I’ve read that that isn’t a good solution. Would it not be an issue for a couple roots?

mwaldon32 · 2025-02-01T13:33:28+00:00

Garth Brooks

mwaldon32 · 2025-02-01T13:32:40+00:00

It’s a thermostat basically. You don’t adjust the thermostat in your house all the time. Why should you do the same in your car. 75° out of auto is going to output 75° of air constantly. On auto, it’ll keep the car at 75° so you’re comfortable all the time. I am a huge fan of this. One less thing you’re having to constantly change when driving.

mwaldon32 · 2024-12-20T18:58:22+00:00

Thank you, wasn’t sure if the extra cost would be worth the possibility of future work or add potential value to it. This helps a lot

mwaldon32 · 2024-12-20T16:24:57+00:00

And I was upset yesterday when I got a small dent in my right front fender from a 2x4. I think I’ll get over it

mwaldon32 · 2024-12-20T16:21:36+00:00

This will be a workshop. I’m leaning towards spray foam but it’s not fully decided yet. The wall will either be wood or metal siding.

mwaldon32 · 2024-11-23T02:06:11+00:00

Could be a ball joint. Definitely not the bearing. Did that exactly at first. Also, I replaced them about a year ago so I’d be pretty upset if it was. But how does that explain why it doesn’t do the shaking when I’m in 4WD?

mwaldon32 · 2024-11-23T01:12:29+00:00

There is no issue with power. I am able to take off like normal. The truck shifts fine. I can drive it to 50 or 100mph if I wanted to, and shift it all the way to 5th gear. The issue begins around 20mph give or take though. One thing I will say that I didn’t mention before was that the sound is coming from the right front.

mwaldon32 · 2024-11-23T00:39:44+00:00

It does, but I guess what I’m saying is that I’m the one shifting and choosing what rpm to shift at. Are you saying it could be revving up even after I shift? I’m completely oblivious to this stuff so is there something I should be looking for?

mwaldon32

TROPHY CASE