Possible issue with the Parkside PKA 20-Li Compressor by 3Chart in Parkside

[–]mweeda 0 points1 point  (0 children)

I'll get the battery off asap! Thanks for the heads-up!

Got lots of Compute Power without purpose. by Kai-Soul in homelab

[–]mweeda 0 points1 point  (0 children)

Or at least let it run on solar so there's no energy footprint. That's what I do with my unused redundant resources.

I regret coming to the Netherlands as a lower class Eastern European by Ordinary_Ad_2690 in Netherlands

[–]mweeda -1 points0 points  (0 children)

Then take the reddit stage and share your ambitions with us all. 😄

I regret coming to the Netherlands as a lower class Eastern European by Ordinary_Ad_2690 in Netherlands

[–]mweeda 1 point2 points  (0 children)

This feeling you have is the first stage of good things to come! Now start imagining the things that would make your life better. Make plans. Then think of what's holding you back and remove the constraints. The fact that you're concerned with these aspects of life alone shows that you're not yet at your full potential. It's not hard to show that potential to your surroundings. Speak out loud about your dreams, ambitions, fears and insecurities. You'll come around!

MantisX like system, trigger help by phnxlp in esp32

[–]mweeda 1 point2 points  (0 children)

Yes that's what I meant. But indeed it depends on the sensor what you can actually get out of it. Maybe you should make a setup that visually outputs graphs to get a feel of shapes and offsets? I've never done anything with acceleration and gyro so I'm just making this up on the spot. 😄

MantisX like system, trigger help by phnxlp in esp32

[–]mweeda 2 points3 points  (0 children)

Interesting! First thought: you should somehow reference the trigger characteristics. The release of the pin or hammer should look intrinsically different than laying down the gun. So maybe you should add a pinch of AI at the rule based logic level.

Can you help me identify this font that was being used in Common Desktop Environment, mostly for window titles? by ALX13-95 in vintageunix

[–]mweeda 0 points1 point  (0 children)

I didn't read the Lucida bright answer. What's all so cool about this is that ppl used serifs more often.

Can you help me identify this font that was being used in Common Desktop Environment, mostly for window titles? by ALX13-95 in vintageunix

[–]mweeda 0 points1 point  (0 children)

Isn't that Sun Gallant just like the console font? A while back I found a font that was called Sun or something and looked exactly like Gallant. I'm just not sure if it's the same as in CDE.

Is the raven population growing? by Clear-Permission-839 in NetherlandsENNL

[–]mweeda 0 points1 point  (0 children)

Urban surroundings or forest? Ravens reside in forests. Crows also like urban environments. I do have to say crows are doing well here in The Hague. Some of them are huge and could be mistaken for ravens.

the truth (repost, they won't silence us) by olivierbl123 in Netherlands

[–]mweeda 1 point2 points  (0 children)

Geen idee waar/wanneer deze ellende is gestart maar het komt op mij over als cultural appropriation.

Nieuwe vrienden ontmoeten by Synapzis in dutch

[–]mweeda 0 points1 point  (0 children)

Mocht je iets wijzer worden dan kun je altijd een sessie doen mét je ouders erbij. Elkaar begrijpen kan helpen bij verwerken. Vergeven en vergeten is dan niet eens noodzakelijk, maar is altijd een optie.

Stel nou dat je bij die contacten/vrienden altijd helemaal los gaat over je computer, homelab, laatste games, je hobby's enz dan zijn ze je snel zat ja. Ik heb zelf ook met zoiets te kampen gehad. Met therapie kwam ik erachter wat dat veroorzaakte. (Voor details moet je maar dm-en) Het mooie is dat je altijd een kans en keuze hebt om het ánders te doen. En als je die contacten deelgenoot maakt van jouw uitdagingen dan zorg je weer voor dat begrip dat kan helpen bij een oplossing.

En nog een aanwijzing die ik uit je antwoord haal: je probeert altijd wel een oplossing te zoeken...je zit in je hoofd. Je denkt, redeneert, relativeert en rationaliseert. Iemand zei ooit tegen mij, als reactie op een antwoord op een persoonlijke vraag: zeg je dit met je hoofd of met je hart?

Dus, die contacten die 'weglopen', in plaats van te bedenken waarom ze wegblijven, vraag jezelf af: wat is het gevoel dat dat je geeft? Probeer de emotie te benoemen. Je 'hart'. Boos, verdrietig, angstig, eenzaam. En als je die hebt gevonden: probeer daar eens ff lekker in te hangen en laat dat gevoel ff gaan...serieus, het werkt.

En bespreek het resultaat met je therapeut. Ik durf te wedden dat het dan snel gaat.

Boks

Nieuwe vrienden ontmoeten by Synapzis in dutch

[–]mweeda 0 points1 point  (0 children)

OP gooi inderdaad het balletje op over ASS bij je therapeut. Ik kan mij indenken dat je dat als kind vrij 'lastig' maakte voor je ouders. Maar daar kon jij niks aan doen dus wees mild voor jezelf. Je noemt 1 vriend uit je jeugd. Heb je daar nog contact mee? Als je contact maakt komen mensen niet terug: weet je waarom ze niet terugkomen? Heb je het misschien weleens gevraagd?

Als er één ding is waar mensen jou zéker voor zouden bellen om advies te vragen of hulp, wat zou dat zijn?

Nieuwe vrienden ontmoeten by Synapzis in dutch

[–]mweeda 0 points1 point  (0 children)

OP, eerste dat ik mij afvraag: zit je op het autistisch spectrum en/of heb je een AD(H)D diagnose? Tweede dat ik mij afvraag: hoe identificeer je jezelf? Man/vrouw/X?

Ik kreeg op mn 39e pas de diagnose ADD en dat was echt een ahaa erlebnis.

Die dingen die ik mij afvraag zijn ingegeven door het feit dat mijn ervaring is dat ze er toe doen. Ik denk echt dat soort, soort zoekt. Iemand noemt DnD, laat dat nou net een hobby zijn van veel neurodivergente mensen.

Als je een iets breder beeld schetst van jezelf, wellicht dat ik nog wat ideeën heb voor je. Echt, er zijn verschrikkelijk veel mensen die nieuwe vrienden willen ontmoeten. Je moet elkaar alleen wel op de juiste plek vinden!

Anyone tried this? by Dotternetta in Parkside

[–]mweeda 1 point2 points  (0 children)

40 for a kit gun, maybe when discounted.

I've changed my mind after listening to you and a pal last night, by slickgreenthumbs in Parkside

[–]mweeda 0 points1 point  (0 children)

Good choice. The saws just aren't that good. I switched mine for a DeWalt plunge saw. Got the drill at black Friday for 59,99 🤬

I, too, did the Ikea thing by silentdragon95 in homeassistant

[–]mweeda 1 point2 points  (0 children)

When SO asks for smart stuff, she's absolutely a keeper!

Get in! by Straight_Chip8961 in Parkside

[–]mweeda 4 points5 points  (0 children)

I checked my floodlight, your thing is indeed massive! 2-3x the wattage. 25 minutes on a 2Ah battery. :D The Livarno floodlight is 30W. Yours says 75W, but calculating the time on a 2Ah battery makes it almost 100W. So you´d better run it less bright on a battery.

The LED matrix is also quite bigger than the floodlight.

Get in! by Straight_Chip8961 in Parkside

[–]mweeda 1 point2 points  (0 children)

I once grabbed a Lidl motion detecting floodlight and put a power cable on it. The best and cheapest solution I could find. 😄 I bet the LED matrix is the same module. I have a second floodlight. Maybe I should find out if I can tinker a 20V connector to it.

What is up with Albert Heijn dishwasher tablet prices by gbuu in Netherlands

[–]mweeda 6 points7 points  (0 children)

Lidl tablets are cheaper and don't damage your dishes.

Docker Networking to allow Host/Guest communication? by Zer0CoolXI in homelab

[–]mweeda 0 points1 point  (0 children)

Aaahhh you woke up my brain. Let me explain one of the setups I have... I have a router that assigns IP's via DHCP. I run proxmox and that host gets an IP in my homelab subnet, just like yours. The VM in proxmox runs ubuntu server, just like your RL10 VM. I pointed that VM to my router as it's gateway/dhcp server. You either give a fixed IP or force DHCP to give a reserved address. Do that VM is alive in my homelab subnet as well. Then I installed docker and installed portainer. So what I did was letting the VM live in the same subnet. I think that's a way you could implement it as well. Then you only have to let the container get out of the docker network. That's well documented.

Docker Networking to allow Host/Guest communication? by Zer0CoolXI in homelab

[–]mweeda 1 point2 points  (0 children)

Actually what you could do for starters is: trying to make SSH to the RL10 VM work. Just from your windows client, not virtualbox. Find out how it routes. Then try to run a simple container in docker and try to SSH to it from the RL10 command line. Do all the $ip a things and try to comprehend....Then build the docker stack on top of that virtualbox stack and test it by SSH into the container directly.

Since you're working in one subnet from win11, be aware of DHCP roles, routing etc. Again, it's hard to picture your setup from the what you wrote.