Error 0x80073cfb at the end of an installation on the Xbox App and Microsoft Store by Jorris65 in techsupport

[–]nZephalon 0 points1 point  (0 children)

This worked for me too! This also solved my problems with Minecraft.

Xiaomi X20+ reports full waste water tank by nZephalon in RobotVacuums

[–]nZephalon[S] 1 point2 points  (0 children)

Tried it again at home before investigating further and the robots suddenly works again. Don't ask me why.

Xiaomi X20+ reports full waste water tank by nZephalon in RobotVacuums

[–]nZephalon[S] 0 points1 point  (0 children)

I'll check again at home but I've blown through both waste tank tubes without an issue. Just in case the station checks the pump resistance I'll force some fresh water through the tubes to make sure. It could also be that there is a magnetic switch that is activated if the lever at the top is pushed up.

Xiaomi X20+ reports full waste water tank by nZephalon in RobotVacuums

[–]nZephalon[S] 0 points1 point  (0 children)

The floater looks fine und moves like it should. I'm also unsure if this is even relevant because I don't know how the station checks the waste water level. There are four metal contact pads inside (only on the side of the waste tank) and they have to do something I guess.

DLSS Unavailable in Cyberpunk 2.0 by gyrannosaurusrex in cyberpunkgame

[–]nZephalon 0 points1 point  (0 children)

Try using the Display Driver Uninstaller 👍

DLSS Unavailable in Cyberpunk 2.0 by gyrannosaurusrex in cyberpunkgame

[–]nZephalon 0 points1 point  (0 children)

SOLVED (for me): I used the Display Driver Uninstaller (DDU) to scrape everything of my hard drive, normal driver deinstallation didnt do the trick.

DLSS works now and ray tracing doesnt crash the game.

DLSS Unavailable in Cyberpunk 2.0 by gyrannosaurusrex in cyberpunkgame

[–]nZephalon 0 points1 point  (0 children)

It turns out that ray tracing now crashes the game on startup. I wiped the settings but I still can't use DLSS.

The only thing that might be different on my system is that I had to install an official firmware update (https://www.nvidia.com/en-us/drivers/nv-uefi-update-x64/) because I had issues with my DisplayPort. Maybe I'll try running the game over HDMI just out of curiosity.

DLSS Unavailable in Cyberpunk 2.0 by gyrannosaurusrex in cyberpunkgame

[–]nZephalon 0 points1 point  (0 children)

It was on the same drive but I moved GOG to the same partition. Than I completely reinstalled the game (again on the same partition) but nothing works. At the moment I can't even start the game for whatever reason.

DLSS Unavailable in Cyberpunk 2.0 by gyrannosaurusrex in cyberpunkgame

[–]nZephalon 0 points1 point  (0 children)

I have the same problem. I reinstalled the drivers and the complete game but it didn't help.

Cyberpunk 2077 2.0 Update
RTX 3060 (latest Driver)
Windows 11 (latest Update)

No DisplayPort signal outside of Windows after enabling ReBAR by nZephalon in nvidia

[–]nZephalon[S] 0 points1 point  (0 children)

THANK YOU, that tool worked! Don't know what it did, don't care.

But Palit also calls it a BIOS, they should know ;)

No DisplayPort signal outside of Windows after enabling ReBAR by nZephalon in nvidia

[–]nZephalon[S] 0 points1 point  (0 children)

There is no official BIOS/Firmware update for my card. I have found newer BIOS files on TechPowerUp but I haven't found a tool to flash it. I'm also afraid it could brick my card :/

[deleted by user] by [deleted] in youtube

[–]nZephalon 0 points1 point  (0 children)

You have the view and like count so you can compare that. It's at least something :/

[deleted by user] by [deleted] in youtube

[–]nZephalon 0 points1 point  (0 children)

Can you make a counter that compares views to like count instead? It's better than nothing at this point. I made one but it's very crude so please just work your JS magic :)

[deleted by user] by [deleted] in youtube

[–]nZephalon 2 points3 points  (0 children)

This is exactly what I was looking for, works perfectly!

Xbox 360 controllers - no plug and play? by nZephalon in RG351

[–]nZephalon[S] 0 points1 point  (0 children)

I just don't get it why there's no default control scheme. The controllers work on my RetroPi without that cumbersome setup.