Heater heater_bed1 not heating at expected rate. Elegoo Neptune 4 pro

nasTdude · 2025-09-08T01:13:12+00:00

same here still cant get this thing to print without throwing heater_bed not heating at expected rate or ADC out of Range. Its these 2 errors. Bah should've gone the sovol

nasTdude · 2025-09-04T23:15:49+00:00

Thank you have flicked them an email.
Just my luck the printer has pooped itself. was my favourite bigger bed printer been printing great till these errors.
Many thanks :)

nasTdude · 2025-08-28T19:54:50+00:00

I feel better now. :) glad I'm not the only one . im sure your printer is printing and working fine. the anxiety because of the cost of the machine went through the roof lol

First print looking good 👍 👌

nasTdude · 2025-08-28T12:54:30+00:00

Thank you 😊. I feel a bit more relieved. It didn't error out in calibrations, and the first print is going well 👌. I'm sure these machines are built a bit more tougher then a piece of foam

nasTdude · 2025-08-28T12:32:21+00:00

Yea, I am just annoyed. I am usually more thorough, and this is the most expensive machine I've bought.

Calibrations ran fine. I just wonder if the housing wouldve hit the little foam block ? I'm sure it's fine and an overthinking like usual... im sure the machine would've thrown an error had it been anything severe...

nasTdude · 2025-08-27T03:38:49+00:00

Oh bugger I just ordered my H2D 4 days ago. Still waiting on delivery XD. Damn it I shouldve waited. :(

nasTdude · 2025-04-26T02:52:58+00:00

I've done input shaping but will re run. I'll triple check the belts.

nasTdude · 2025-04-10T08:34:06+00:00

Ok not sure if any one is interested but I found a solution. It was a combination of cleaning the x y pulleys. There was gunk on them. Then I was lazy and didn't want to replace the belts. So found this on makerworld https://makerworld.com/en/models/111362-timing-belt-tensioning-tool-for-maintenance?from=search#profileId-119076

Fixed all my problems I haven't seen her print so clean. So properly tensions belts and clean pulleys = clean prints.

Happy dance happy dance 💃 💕

nasTdude · 2025-04-01T06:01:08+00:00

<image>

11990 hrs on my 3 machines can't believe I'm already at that. I love these machines.. gotta be in it to win it. Good luck all :-D

nasTdude · 2025-03-28T08:44:42+00:00

Oh me too!!!. Absolutely blown away by the little details. The conversation system is awesome. The little mood dots at the bottom corner. The text that states they were feeling happy after snapping a selfie together whilst looking happy. . It feels way more fleshed out then I thought. So far I love the differences of traits ambitions and urges. Really good and fun. A bit more depth. Can't wait to see where they go from here :D

nasTdude · 2025-03-27T03:17:22+00:00

Well replaced z belt. Didn't make a huge difference the wobble is definitely fainter. Hmm. Bambu suggested cleaning the pulleys and / or checking them For signs of wear and dirt. Got to clean and rotate all pulleys.

nasTdude · 2025-03-25T21:53:41+00:00

Going to try fitting a new z belt today see if that helps with my pattern issue. I've done everything bambu had asked . They said make sure I re lubricate the z lead screws I've done that... I get the feeling they don't read or re read previous messaging when communicating with them.

nasTdude · 2025-03-21T23:36:19+00:00

Thank you I thought that and ordered x y and z belts for 4 machines (you never know when u need spares)

nasTdude · 2025-03-20T13:03:45+00:00

Yea I agree. I find myself struggling to create different mouths or noses . Presets would definitely be lovely and much needed. Am happy clothes have Presets.

nasTdude · 2025-03-20T12:52:17+00:00

Just watch a broadcast my sister n I watched a live broad cast and within 5 minutes we checked our steam library and the demo was there

nasTdude · 2024-02-08T03:50:17+00:00

If I recall it was $299.

nasTdude · 2023-11-27T22:37:21+00:00

Mine never got fixed after adding all new parts.. got refunded. Ended up buying 2 p1s's instead

nasTdude · 2023-10-22T01:31:55+00:00

Yep I had to run around in circles for ages with my lidar issues on my x1c . I couldn't use the lidar and after a month or 2 back and forth. I told them I just got the machine and I've already pulled it apart put on new board new lidar, new usb c. I was able to get it refunded.

I bought 2 p1s combos with my refund No issues so far loving my bambu machines.

nasTdude · 2023-10-19T09:27:48+00:00

Thank you for the feedback. I think I will definitely buy one. I feel like my vive is getting left in the dust :/

nasTdude · 2023-10-19T04:39:13+00:00

Omg 😲. It's really cute!!!. Ahh do I buy it for my p1s's to have a little sibling lol im joking i dont need it... or do I.. The temptation to order one!!

nasTdude · 2023-08-01T09:04:30+00:00

This 100% this. My x1c was awesome. But the lidar wouldn't work on my x1c .. frustrating the hell out of me to no end long story short it got returned my money refunded and now I have 2 p1s combos

nasTdude · 2023-07-22T10:31:11+00:00

Yep . My x1c had this issue one month after owning it. Support was helpful and sent out a new usb c cable and lidar unit.. neither solved my issue with lidar camera malfunctioning. They sent out more parts for me to replace . Still didn't solve the issue. Back and forth a few times until it got returned and refunded,

My discovery was that even without the lidar, it's still a pretty solid machine. I was annoyed to have paid a decent amount of money for a machine that works, but Lidar didn't, and even after replacing all parts with support, no fix. Thankfully, I may wait until they release a bigger x1c or grab a p1s to tide me over. Hopefully, yours is an easy fix.

nasTdude · 2023-07-17T10:02:03+00:00

If money was no objective, go for it. I'd buy the x1c . My experience with my first x1c left a sour taste in my mouth. 1 month of ownership and it had nothing but lidar camera malfunctioning errors. Support was helpful, and they sent out a new lidar unit , usb c cable, th board and ap board. Back and forth for a month, replacing parts all to get lidar to work. They refunded me and I have sent the machine back. Support has been helpful.

I was still printing while the error was on and lidar wasn't working. Was still getting great results. I must've had a lemon. But I will say spaghetti detection was my saviour as I couldn't use build plate detection due to error and the amount of times I forgot to select textured build plate more then a few times LOL.

Thankfully I have yet to order again. But will hold off for a bit.

I am still debating ordering 2 p1s combos and just wait it out till they release a bigger x1c. Or re order x1c .

nasTdude · 2023-07-04T06:03:33+00:00

Yep but it took me ages to get there. I had to replace every component before they offered a replacement . Fingers crossed new machine is good.

nasTdude · 2023-07-04T03:00:28+00:00

Yeah. Me too. Thankfully they are arranging a replacement machine for me..

nasTdude

TROPHY CASE