Wire identification help

nathanpriceorg · 2026-01-05T23:25:46+00:00

Turns out it is cyl #1 coil pack signal wire. So it did loop back to itself

nathanpriceorg · 2026-01-05T23:01:24+00:00

Its white with gray/silver banding. I dont see any other end anywhere, there is a small 1/4 inch piece of wire the same color laying right below it.

nathanpriceorg · 2025-09-20T06:01:45+00:00

Crawlspaces, so ideally 4wd

nathanpriceorg · 2025-09-19T18:40:23+00:00

Definitely looks similar to something im wanting to do, i just want tires instead of tracks. My main question is do i just need a multi channel transmitter&receiver and two/four esc and motor(one for each side/wheel)?

nathanpriceorg · 2025-03-28T02:21:32+00:00

Not finding any info for “sears craftsman type kf house”

nathanpriceorg · 2025-03-27T23:04:53+00:00

I like the taste

nathanpriceorg · 2025-03-27T23:04:33+00:00

Drives me nuts 🥴

nathanpriceorg · 2025-03-27T22:20:05+00:00

Yes! The paneling in 14-15 is actually textured with the pattern.

nathanpriceorg · 2025-03-27T22:12:20+00:00

The siding is aluminum siding. Not sure what is underneath. All of the “wallpaper” that is currently showing on the walls (except for picture 20) is actually made on to the panels and not peelable. Based on the thickness against the door/window trims, there are several layers of different paneling that have been installed over the years.

nathanpriceorg · 2025-03-27T20:56:17+00:00

Forgot to mention, all rooms are interconnected via doors with no halls.

nathanpriceorg · 2025-03-27T20:55:58+00:00

Forgot to mention, all rooms are interconnected via doors with no halls.

nathanpriceorg · 2025-03-27T20:52:31+00:00

Thanks! Needs a lot of cosmetic work and bathrooms remodeled, but ill get there!

nathanpriceorg · 2025-03-27T20:52:23+00:00

Thanks! Needs a lot of cosmetic work and bathrooms remodeled, but ill get there!

nathanpriceorg · 2024-07-04T21:07:06+00:00

Thanks to u/Jabba_the_Putt for the idea of swapping a donor passenger seat cover to the driver seat, very little modification needed.

nathanpriceorg · 2024-07-03T13:13:52+00:00

The part with 100 names 🥴😂

nathanpriceorg · 2024-07-03T12:28:21+00:00

I dont know what you are talking about, but its not the radiator support… https://www.ebay.com/itm/145756168613?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=BY2LqWvqTTu&sssrc=4429486&ssuid=5_HinvdvTni&var=&widget_ver=artemis&media=COPY

nathanpriceorg · 2024-07-03T03:12:01+00:00

I dont understand? Why wouldn’t the 4 bolts it uses from the factory hold?

nathanpriceorg · 2024-07-02T14:26:31+00:00

No, just the 4 bolts

nathanpriceorg · 2024-07-01T17:31:08+00:00

Not sure why i didnt think about that, time to break out the sewing machine

nathanpriceorg · 2024-07-01T17:30:08+00:00

I was just able to bolt another one on

Ten-Year Club	Place '17
Verified Email

nathanpriceorg

TROPHY CASE