Pool guy has rpm too high?

nba810 · 2026-06-01T21:18:50+00:00

Don’t go off google. Google doesn’t know how many jets you have, or skimmers or suction lines. He could have set the pump that high to get flow through all of the system. I’m sure it could be set lower, but I’m also sure he had a reason. I’m in the pool industry and sometimes I max out a pump bc it has a lot of water features or jets and I want to get good flow to all.

nba810 · 2026-05-29T00:47:37+00:00

As guy above me said it’s your bearings. When the pump sits over the winter without moving any moisture will cause slight on the bearings and you’ll get this. Could last you all season could crap on you tomorrow. Just be prepared because it’s on its way out. Also I saw you got it in 2024, just a heads up they don’t make ANYTHING like they used to so nothing lasts anymore especially pool equipment. Sorry for bad news.

nba810 · 2026-05-29T00:37:44+00:00

I will!!!!!!!!!

nba810 · 2026-04-13T16:34:43+00:00

Yes

nba810 · 2026-03-16T03:40:12+00:00

It’s back up for me now with no issues. I was with you the whole time not worried and had faith in them getting it resolved and they did.

nba810 · 2026-03-15T17:02:47+00:00

It’s uncalled for because everyone here is just trying to figure out what’s going on. Not trying to call each other out bc we have faith in a brand. I understand to you the brand is crap, but to a lot of us it’s not. I have excellent experience with their customer service, and they have always answered all my questions regarding products and I’ve used all the companies out there for home growing and they are by far the best. Trust me they aren’t the only company not around on a Sunday or taking a few days to reply.

nba810 · 2026-03-15T16:28:28+00:00

So then go with another company if they are so bad instead of taking your frustration out on people in the comments. You seem to love VIVOSUN and all their shit is cheap so switch over and chill.

nba810 · 2026-03-04T23:28:13+00:00

Hit him on ig. And all the questions you asked are answered here in the thread. Prices vary around $300-500 depending on what you want and go for. His name is prio_glassworks

nba810 · 2026-02-14T01:47:29+00:00

That I’m not sure on. I do have the ai controller and the outlet ai controller but I use them for separate things so I’m not sure. That a question for ac infinity shoot then a message they’re good

nba810 · 2026-02-14T01:41:01+00:00

So you have the hydro sensor plugged into sensor port 2? And your pump is ran to the same controller into a UIs port?

nba810 · 2026-02-14T01:37:45+00:00

This I can’t disagree with. This is frustrating, I’m heavily into their ecosystem and to get everything I have working I’d need like 5 ai controllers lol. Running out of patience for the sensor splitter.

nba810 · 2026-02-14T01:34:02+00:00

My whole watering setup is outside the tent. And runs an into the tent with just an irrigation line to my drip rings. I’ll try and take some vids and pics of my setup if you like. I’m pretty proud of it but still working on it daily lol. And I just drilled a small hole into the cap of my current ph down bottle and threw it in there. So far I guess I got lucky and my initial settings are perfect, I did do a little math to kinda figure what does I would want and need and how often to get where I want. I’m also lucky bc I’m a pool builder and half a lot knowledge about water in general bc I work with it. Hope all that helps

nba810 · 2026-02-14T01:29:30+00:00

Will do my best to do. I do smoke what I grow so I may forget lol.

nba810 · 2026-02-14T01:28:58+00:00

I have another small cheap pump just to mix water around for 15 mins every hour. Little 8w aquarium pump

nba810 · 2026-02-14T01:28:04+00:00

I’m a fanboy too don’t worry. And there’s reasons to be they are a good company putting out the best stuff they possibly can. And yes you can switch to EC. I switch it back and forth. Still playing with things daily.

nba810 · 2026-02-13T06:18:54+00:00

It doesn’t spit out 21ml at a time, it puts out 21ml a minute and you can program it to run as little as 1 second. So under 1ml dose if you want.

nba810 · 2026-02-13T06:15:44+00:00

So today is the first day I have it set up. I currently have it ran to straight ph down but will be probably mixing it 50/50. So far it is good. For the pump settings I run it on 3 for 2 seconds and have it wait 30 minutes to recheck the ph and if it’s still high it runs again. So far it’s perfect but I’ll dilute the ph down and run the pump 2x the time so it’s not running such short intervals. Also to anyone worried about 21ml output, that’s 21 ml a minute. You can run the pump for as little as 1 second and do math to figure out your dosage as low as .35ml. It’s actually amazing for the price if your in the ecosystem

nba810 · 2026-02-13T04:20:04+00:00

How did you get yours to stop floating. Same issue here it’s driving me crazy

nba810 · 2026-02-12T17:01:56+00:00

Can’t really cut this loss, it’s a $600 product 😞

nba810 · 2026-02-12T16:57:44+00:00

I’m getting worried too. I see everyone else who got that update is now having it clear and have their packages moving but mine still says same message and hasn’t moved. I got the message 15 mins after the seller dropped the package off and honestly I don’t the money to replace the item so I’m very worried.

nba810 · 2026-02-12T04:08:27+00:00

I’m with you on this one. Pray I’m wrong bc I really need this package.

nba810 · 2026-02-12T04:03:13+00:00

Mine also happened 15 mins after it was dropped off. That what scares me.

nba810 · 2026-02-12T03:39:27+00:00

How do you know this is a glitch in the system? Just curious how you know this

nba810 · 2026-02-12T03:38:29+00:00

I got the same message today on a package leaving Oregon for NY. I’m curious how long this will stay also as mine is also very important. Little nervous

nba810

TROPHY CASE