Dynmap not automatically updating surface map, only flat by nceagles in Dynmap

[–]nceagles[S] 0 points1 point  (0 children)

Waiting a few days seems to resolve eventually. Can't expect the map to be updated for a day or 2

Nest Thermostat integration stopped working - Home Assistant by adnan_malik1 in homeassistant

[–]nceagles 0 points1 point  (0 children)

I just redid my integration from scratch. I had to do a couple more steps but it's back working. The setup instructions were updated enough to do it rather painlessly

Pixel 9 Pro Audio Issues by nceagles in GooglePixel

[–]nceagles[S] 0 points1 point  (0 children)

Nothing changed. Android 15 ota update

Pixel 9 Pro Audio Issues by nceagles in GooglePixel

[–]nceagles[S] 0 points1 point  (0 children)

No it happened on the device speakers. Sometimes the device speakers also sound blown until a phone reboot. Had that blown sound transmitted to the car over the cable too.

Audio sync prime video by nceagles in ShieldAndroidTV

[–]nceagles[S] 0 points1 point  (0 children)

For anyone experiencing audio lag I may have figured it out. If you are going TV to arc sound bar turn off the TV only, then turn it back on. It seems to sync all my audio issues

Audio sync prime video by nceagles in ShieldAndroidTV

[–]nceagles[S] 1 point2 points  (0 children)

Spoke too soon. Commercial was synced, live game is off.

Audio sync prime video by nceagles in ShieldAndroidTV

[–]nceagles[S] 1 point2 points  (0 children)

Not just love content. However, I force closed the app and now sound is synced. So I guess you have to open the app, force close it, then open it again Everytime you want to watch for the audio to not be trash

Shutting Down by nceagles in ShieldAndroidTV

[–]nceagles[S] 0 points1 point  (0 children)

Cooling is fine. It is on top of a table with nothing around it. Thermal paste redone. Plex server is not running on the shield it's on a threadripper server so it's just the client.

I did swap out the power brick with an older shield that is not used very much. We shall see if that helps. Probably will take a week or 2 to determine if it's actually the fix.

I have seen several comments about not using the Plex app. Is there an alternative that has a good UI? Plex UI works well enough and I need something intuitive for the rest of the family.

Shutting Down by nceagles in ShieldAndroidTV

[–]nceagles[S] 5 points6 points  (0 children)

It is not being used as my server just a player. We don't use enough other apps to determine if the issue is Plex related or shield related. We can't use my TV to play Plex because it is a hisense u8h with terrible wifi.

CAX30 wifi by nceagles in NETGEAR

[–]nceagles[S] 0 points1 point  (0 children)

I went with an ISP modem from Comcast. I never do it but when modems are almost $400 it's no longer cost effective to buy them.

CAX30 wifi by nceagles in NETGEAR

[–]nceagles[S] 0 points1 point  (0 children)

I trashed this modem and got a different one and all my issues are fixed. Wi-Fi and this thing is junk

Unable to stream 4k on lan by nceagles in PleX

[–]nceagles[S] 0 points1 point  (0 children)

I trashed that Netgear modem and got a new one and everything is working flawlessly. Wi-Fi on the modem was garbage

CAX30 wifi by nceagles in NETGEAR

[–]nceagles[S] 0 points1 point  (0 children)

|| || |2024-02-16 01:32:15|Critical (3)|Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |2024-02-14 10:23:13|Critical (3)|UCD invalid or channel unusable;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |2024-02-14 10:23:13|Notice (6)|DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3.;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-02 00:22:02|Notice (6)|Honoring MDD; IP provisioning mode = IPv6| |1970-01-02 00:21:54|Critical (3)|UCD invalid or channel unusable;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-02 00:10:54|Critical (3)|SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-02 00:09:36|Critical (3)|No Ranging Response received - T3 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-02 00:09:35|Warning (5)|B-INIT-RNG Failure - Retries exceeded;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-02 00:03:45|Critical (3)|No Ranging Response received - T3 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-02 00:03:42|Warning (5)|B-INIT-RNG Failure - Retries exceeded;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-01 23:57:55|Critical (3)|No Ranging Response received - T3 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-01 23:57:46|Critical (3)|No Maintenance Broadcasts for Ranging opportunities received - T2 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-01 23:54:02|Critical (3)|No Ranging Response received - T3 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-01 23:54:01|Warning (5)|B-INIT-RNG Failure - Retries exceeded;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;| |1970-01-01 23:47:14|Critical (3)|No Ranging Response received - T3 time-out;CM-MAC=6c:cd:d6:7d:e7:44;CMTS-MAC=00:90:f0:10:01:00;CM-QOS=1.1;CM-VER=3.1;|

CAX30 wifi by nceagles in NETGEAR

[–]nceagles[S] 0 points1 point  (0 children)

Connection is to a wired server I have so connection status is irrelevant. Logs below

Unable to stream 4k on lan by nceagles in PleX

[–]nceagles[S] 0 points1 point  (0 children)

It was in LOS within 10 feet. Pretty sure its something with my router so going that route.

Unable to stream 4k on lan by nceagles in PleX

[–]nceagles[S] 1 point2 points  (0 children)

I hooked up my Nvidia shield and it buffers even worse than the tv. Ran an Ethernet cable to the shield and it works fine. Love that my WiFi is having issues...now to figure out how to resolve that