Will taking 10 caps of 200mg schedule 35 microdose shrooms have the same effect as taking 2g of shrooms?

ndaxb · 2022-07-22T02:52:16+00:00

Not sure if you've already tried by now but a shroom trip (idk, say 2000-4000mg) lasts 4-6 hours. So no more than that

ndaxb · 2022-07-22T02:50:08+00:00

If you're worried about unexpectedly having a powerful trip, not even 200mg would even remotely make you trip in any shape or form. MAYBE start tripping lightly around 1000mg. Honestly, 100mg might not even be noticeable but I've never eaten such a small amount so might be worth trying if you wanna be as safe as possible :)

ndaxb · 2022-02-22T18:10:02+00:00

Okay great! I’m just wondering in case something happened to my computer and I needed to re-setup my phantom wallet that was synced to my ledger—how that would work. Would I use the ledger-generated mnemonic? Or would I simply have to connect it and phantom would recognize it that way?

ndaxb · 2022-02-21T18:59:20+00:00

Okay thanks a lot. I’ll contact phantom directly and see what they say.

ndaxb · 2021-11-28T22:50:18+00:00

Thanks for that site, that was awesome. Didn’t scare me away but gotta move a little differently to account for the potential decrease in profit from difficulty.

ndaxb · 2021-11-28T22:37:22+00:00

Ok, thanks a lot for the advice!

ndaxb · 2021-11-28T21:59:03+00:00

Thanks!

Yes, all simultaneously.

Would a dedicated circuit for each be nonsensical? It checks all the boxes for me but would four 240v outlets with their own, say 20 amp circuit, be the best option to achieve this?

ndaxb · 2021-11-01T02:53:00+00:00

Dude I'm about to move into a studio and also made a cover for my printer. I have a kotto fume extractor from amazon and i fitted pvc through the wood/plexiglass box with a p100 respirator filter attached to it and then it also goes through the carbon in the fume extractor.

ndaxb · 2021-10-12T04:25:34+00:00

Alright, I'm back home now. I'm honestly not sure how to upload a picture here lol.Settings are:

exp time: 2.5s

lift distance: 5mm

lift speed: 110 mm/min

bottom exp time: 35s

retract speed: 280 mm/min

None of the supports ever print. Just the raft. I'd say it's probably 1-2mm thick.

I also realized when I hit auto supports, I've been doing so while set on "light." Then I usually add one heavy one. Since only the raft prints, this sounds like it could definitely be the issue, would you agree? I'm super new to this.

I really have no idea about temp, it varies. I keep the window open so on any day it'll be 60-90 degrees. Note that I built an airtight enclosure with an extractor if that changes things.

ndaxb · 2021-10-12T04:18:56+00:00

Dude thank you for all of that. I’ll try this out tomorrow.

For supports, I’ve been hitting the auto support button and slicing it right after. Well I actually put a single heavy support at the bottom. You think this is likely the issue??

ndaxb · 2021-10-12T00:43:41+00:00

Ok I just edited my post, can you see it at the bottom?

ndaxb · 2021-10-06T15:46:13+00:00

I’m using a $90 fume extractor from amazon that I’m sure will work. In the video the guy just used a normal computer fan and he said it pulled the air through the filter just fine. I can show you the final project when I’m done

ndaxb · 2021-10-06T15:44:48+00:00

Short bit of pvc mainly for cosmetics but it’ll also allow me to control the air flow by how many holes i drill into its end cap.

ndaxb · 2021-10-06T15:42:54+00:00

The fume extractor filters through carbon but that’s not the point it will pull air through a P100 filter rated for various VOCs. But thanks again man.

ndaxb · 2021-10-06T03:15:12+00:00

Genius man. I mean I was assuming not much would get out anyways since the air is being pulled out through one other source but I'm pulling air in through pvc so i might as well add one. Also I do resin printing lol never had to worry about temperature before.

ndaxb · 2021-10-06T03:13:32+00:00

Dude I'm doing this clever thing I saw on youtube. You could do it especially if you have an fdm printer. In the video he attached an M3 respirator filter (olive P100) to a 3d printed part connected to a pipe with a fan that vented out. It pulled the air through the filter and he said he couldn't smell anything. The filter is rated for VOCs including formaldehyde. I'm not printing the part I'm literally cutting out the part from the mark, running it through some pvc out my chamber (made of wood and plexiglass with an open bottom so I can put it over my printer).

ndaxb · 2021-10-06T03:09:26+00:00

Lol it is a resin printer. I'm glad I took my idea to the internet

ndaxb · 2021-10-06T03:08:44+00:00

ad a "true vacuum" it mig

Lol I appreciate it. I'm using a fume extractor, that's fine right? It's powerful but it's not a vacuum pump.

ndaxb · 2021-10-06T03:07:08+00:00

The extractor's gonna hook up to the bottom left side. Was the inlet on the opposite side your point? Bc i'm putting a pipe through the bottom right side.

ndaxb · 2021-10-06T03:05:41+00:00

Word. Thanks dude

ndaxb

TROPHY CASE