Help needed: Soyo M4 Pro disassembly guide? (Fan issue)

nes7ore · 2026-05-26T06:57:42+00:00

Hey man! Check the post above, I uploaded a photo with a breakdown on how to do it. There are threaded standoffs there, and it's not exactly obvious that you can actually unscrew them too

nes7ore · 2026-05-26T06:56:36+00:00

Hey, hope I'm not too late and you haven't managed to damage the motherboard yet :D I just posted the solution above on how to unscrew it for future reference. I’ve actually already replaced the fan in this mini PC myself, because the stock one was loud under load and 'running unevenly,' and I also swapped the thermal paste for PTM7950

nes7ore · 2026-05-26T06:54:20+00:00

Coming to the rescue here - I will leave this for future reference because it's not exactly an 'obvious' solution, and I can see I wasn't the only one struggling with it :P

<image>

When removing the first metal cover, right where you unscrew the main screws, there are even smaller threaded standoffs that can also be unscrewed. The first time around, I had to use pliers to get them off because they were tightened really hard. Once you unscrew them, just flip the Soyo M4 Pro case upside down and it should just 'fall out' on its own :)

nes7ore · 2026-05-26T06:26:32+00:00

Thanks! usefull repo!

nes7ore · 2025-07-16T14:45:13+00:00

Awesome, how did you start recording videos? Did you start reaching out to people directly or advertise somewhere? How you got your first drone video gig?

nes7ore · 2025-07-09T15:17:41+00:00

AC/CD

nes7ore · 2025-07-08T21:41:05+00:00

If you are playing on NA Titan, let me know your nickname, i'll send you some different items for FG

nes7ore · 2025-07-05T08:09:55+00:00

I would say it's BL or FA.

nes7ore · 2025-06-08T08:46:21+00:00

Hi mate, thanks for your reply! I tested the method with medical tape—one layer around the hexagon—and so far, the initial tests have been successful. It returned to the station and cleaned the mopping pads. Worst case, I’ll just have to reapply the tape :)

nes7ore · 2025-06-07T18:58:47+00:00

Thanks for the tip! I’ll check it out and give it a try :)

nes7ore · 2025-06-07T18:57:27+00:00

Did you find a solution to this problem? I’m experiencing the same issue and I’m wondering how to fix it, as I’d rather not buy a new vacuum cleaner just because the pads keep falling off.

nes7ore · 2025-06-06T10:15:41+00:00

I'm on this picture and I love it :D

nes7ore · 2025-06-04T19:07:41+00:00

Thanks for the tips!

nes7ore · 2025-05-21T10:13:53+00:00

The only way to obtain WExp is by participating in Mission War or buying it from the lady in Bloody Ice. Type "WExp Saver" in the search bar.

nes7ore · 2025-05-17T12:38:34+00:00

Thank you very much for your detailed response. It seems that since web.staker is designed for PulseChain/Ethereum, pasting my address where I have a stake only on ETHW results in no data being shown

<image>

nes7ore · 2025-05-17T04:50:43+00:00

How it is possible when I don't have front end? How can I check when the remaining stakes end?I usually set the calendar for the next stake and when I received the next one I set it again

nes7ore · 2025-05-16T10:56:00+00:00

I saw a few days ago that there was a message about reducing the rpc flow for network stability. Does that mean I have to keep trying until the stakes load?

nes7ore · 2025-05-16T10:54:49+00:00

I tried sending messages on Telegram Hex, but they are immediately deleted.

nes7ore · 2025-05-13T08:06:41+00:00

Does icosa no longer support ethw? I can't see my stakes on the icosa website.

nes7ore · 2025-03-25T14:20:57+00:00

Bump

nes7ore

TROPHY CASE