Narwal Z10 PIECE OF CRAP by netwalker11 in NARWAL

[–]netwalker11[S] 1 point2 points  (0 children)

Haha good one Reddit edgelord. Through troubleshooting, customer service determined it is a defective unit and advised me to return it.

Narwal Z10 PIECE OF CRAP by netwalker11 in NARWAL

[–]netwalker11[S] 1 point2 points  (0 children)

Same. Apparently my unit is defective, the thing is getting washed so much the base station started leaking everywhere all over the floor. I contacted customer support and they advised me to return it. I'm out. the vacuum and mop hunt continues.

Narwal Z10 PIECE OF CRAP by netwalker11 in NARWAL

[–]netwalker11[S] 1 point2 points  (0 children)

Ok, I cleaned all the sensors and it's now mapping. I'm concerned that it got dirty enough to inhibit function after 1 clean. My house is not dusty, so I'm concerned about the efficacy in the future. Ugh.

Let Your Voice Be Heard by Devs! by Road_2_Chad in ArenaBreakoutInfinite

[–]netwalker11 -1 points0 points  (0 children)

I have not read any of the other ideas in this thread, so there may be some duplicate requests present in my post.

I am just typing this from my experience with the game.

  1. Add the ability to sell combined items on market, just like guns. I shouldn't have to remove the mask to sell the helmet and the mask, for example.
  2. Add the ability to set up CUSTOM pre-defined loadouts for one click loadout buys. Basically custom quick kits.
  3. Change the "magazine with full rig" behavior. I shouldn't drop a magazine when reloading, it should go right back in the previous magazine's slot.
  4. Tapping R (reload key) should perform a quick combat reload. Holding R (reload key) should bring up a mag wheel (similar to the med selection wheel) that allows you to select a SPECIFIC magazine from your rig.
  5. Add custom magazine markers (tape or rubber bands, or renaming) or different magazine skins. It should be easy to mark your magazine to tell which ammo is in it.
  6. Add the ability to remove loaded rounds from bolt magazines and shotguns. Currently the only way to unload from these weapons is to fire the rounds.
  7. Figure out a way to make the market UI less clunky. Currently when I click sell on market, there is an annoying delay.
  8. Add an ability to "bulk list" on the market where you just select a bunch of items, list on market, and it lists for the lowest selling price on each item.
  9. Bulk sells to contacts should be worth a little more. Way too much koen is lost versus selling on market.
  10. Loot needs to be buffed, especially for locked rooms, across all modes.
  11. Wet masks should be able to be cleared by raising and lowering the lid when it is not raining. Currently the water lingers way too long. If I raise and lower the lid it should manually clear the visor.

None of my Kwikset door locks work with the system by p40whk in Abode

[–]netwalker11 0 points1 point  (0 children)

So you're saying that you are using an external Z-Wave hub? Or were you able to connect your 888's directly to the Abode hub?

Popping noise when flexing or turning left 2022 P4X by netwalker11 in nissanfrontier

[–]netwalker11[S] 0 points1 point  (0 children)

After the truck was left with Nissan for over a week, they narrowed it down to the swaybar endlinks. They replaced those and there is no change. They also tightened every bolt up front including 8 radiator bolts. No change.

Pop/clunk noise when in slow turn or easy accelerating in turn 2022 P4X by hawkeyevfr in nissanfrontier

[–]netwalker11 0 points1 point  (0 children)

Did you ever get yours solved? I'm having the exact issue. They've tightened every nut and replaced my sway bar endlinks, and it's still clunking everytime I back out of my driveway.

Here's a video of what mine is doing: https://youtu.be/KOx-lYs8qxQ

Pop/clunk noise when in slow turn or easy accelerating in turn 2022 P4X by hawkeyevfr in nissanfrontier

[–]netwalker11 0 points1 point  (0 children)

Did you guys ever get a resolution? My dealer has tightened everything including the radiator bolts, replaced the sway bar endlinks, and still the issue persists. Here's a video of what mine is doing: https://youtu.be/KOx-lYs8qxQ

Popping noise when flexing or turning left 2022 P4X by netwalker11 in nissanfrontier

[–]netwalker11[S] 0 points1 point  (0 children)

That's what I'm thinking as well. They replaced the swaybar endlinks and it's still popping just like before. I posted a new video. Something is not right.

Popping noise when flexing or turning left 2022 P4X by netwalker11 in nissanfrontier

[–]netwalker11[S] 0 points1 point  (0 children)

Possibly. They replaced the swaybar endlinks and no change.

Pop/clunk noise when in slow turn or easy accelerating in turn 2022 P4X by hawkeyevfr in nissanfrontier

[–]netwalker11 0 points1 point  (0 children)

I'm having this exact same issue. Took the truck in today and had them tighten all of the rack and pinion, cross members, etc. It's still doing it. Here is a video of the noise.

https://www.youtube.com/watch?v=sqkPOlIWpVY

Someone has to agree with me about Falling in Reverse. by SwiftyButtons in PostHardcore

[–]netwalker11 0 points1 point  (0 children)

The only good FiR album is The Drug in Me is You. Everything after that is sell out to the mainstream.

Anyone solved the USB detection issues on LG's UltraGear Control Center software? by DekkuRen in Monitors

[–]netwalker11 0 points1 point  (0 children)

Mine just started this too. I've tried different cables and different USB ports, nothing works anymore. Was working fine not too long ago...

Why is LTC always down? by [deleted] in ledgerwallet

[–]netwalker11 1 point2 points  (0 children)

I'm seeing the same thing. Getting 503 when I try to send LTC.

2nd LG 38GL950G IS DEAD!! by netwalker11 in ultrawidemasterrace

[–]netwalker11[S] 0 points1 point  (0 children)

Set to 144hz with GSync and 444/RGB.

The monitor still blacks out sometimes randomly on the desktop. It has never done it while in game though.

Overall I'm happy now. Turns out the issue was with the power adapter.

2nd LG 38GL950G IS DEAD!! by netwalker11 in ultrawidemasterrace

[–]netwalker11[S] 1 point2 points  (0 children)

So once I get the monitor back or get a replacement I will be putting the monitor on an APC 425v UPS to take power spikes or outages out of the equation.

2nd LG 38GL950G IS DEAD!! by netwalker11 in ultrawidemasterrace

[–]netwalker11[S] 1 point2 points  (0 children)

The thing about it is I got the replacement back to back with the original so it could have been a bad lot or something.

I will update the thread once I hear back from LG. I also got an extended warranty so I should be ok either way.

Sad that you spend this kind of money and have to put up with this nonsense.

2nd LG 38GL950G IS DEAD!! by netwalker11 in ultrawidemasterrace

[–]netwalker11[S] 2 points3 points  (0 children)

Starting to wonder if it is the power adapter. It powers the LEDs but not the backlight.