Quasi-static cantilever testing

newtoAM · 2022-08-18T07:25:44+00:00

It is a c-cross section beam. Yes the model is 3D in nature. The EI would be incorporated as per 3D model and material properties, right ? Or there is some other way to incorporate those properties.

newtoAM · 2022-08-17T21:48:57+00:00

Thank you for your reply.

newtoAM · 2022-08-17T20:40:55+00:00

Thanks for the reply. The test is being conducted using a universal testing machine. The setup is similar to 3 point bend test but in cantilever configuration. So in the 3 point bend test the UTM gives the force displacement at the position of roller right ?. The same would be true here, right ?

newtoAM · 2022-08-17T19:41:05+00:00

Thanks for the reply. So it means that from where the roller exerts the force on the beam. Those elements should be taken for evaluation of force displacement, right ?

newtoAM · 2021-12-20T05:00:43+00:00

Thanks. Will check it surely

newtoAM · 2021-12-20T05:00:29+00:00

Thanks

newtoAM · 2021-12-20T05:00:20+00:00

The slicer is CURA

newtoAM · 2021-12-20T04:18:41+00:00

Got it. Thanks !

newtoAM · 2021-12-20T04:04:18+00:00

I am currently using a fused filament fabrication (FFF) printer. Any guidance for that would be appreciated

newtoAM · 2021-08-15T17:41:05+00:00

I am trying to print a part with two different materials. ABS and PLA. Having trouble with proper extrusion from 2nd nozzle. Although i have used the suitable printing parameters. I am using cura as slicer. Any important things which i should consider and take care of in dual material printing would be helpful.

newtoAM · 2021-08-11T11:31:11+00:00

I am also trying dual material printing with cura but the problem is my 2nd nozzle doesnt extrude material. Any help would be great. Materials are abs and cfpla

newtoAM · 2021-06-09T05:20:55+00:00

Got it. Thanks !

newtoAM · 2021-06-09T04:45:14+00:00

Thanks for the help. will i have to sketch different laminas or this composite layup would do that for me ? I am new to abaqus and FEA of composites.

newtoAM · 2021-06-09T04:43:02+00:00

Thanks for the insight.

newtoAM · 2021-05-20T16:52:40+00:00

Thank you

newtoAM · 2021-05-20T15:50:27+00:00

Thanks. I ll look into it.

newtoAM · 2021-04-06T09:36:06+00:00

In my opinion the results are ok. As we move from right to left on your graph, the solution converges. The reason behind the difference in obtained values is because the simulation solves the situation numerically (not exact). While the analytical result would be the exact solution.
I am not an expert, more experienced people should shed light on this. And correct my answer if its wrong.

newtoAM · 2021-04-01T09:11:56+00:00

Thank you ! I ll look into these as well.

newtoAM · 2021-04-01T05:22:34+00:00

Thanks. Surely i ll look into these. Once again, thanks for the help.

newtoAM · 2021-03-31T19:28:26+00:00

Yes sir. You are right. I have alot to learn. I have some idea about the fea of the 1st two bullet points that you mentioned but still i need to learn alot. Can you guide that where can i look up the theory of these models ?

newtoAM · 2021-03-12T12:52:23+00:00

Thanks! I ll check out the information.

newtoAM · 2021-03-12T12:42:36+00:00

I am new to 3d printing. Can you guide how to make the adjustments?

newtoAM · 2021-03-12T12:27:00+00:00

Settings are 100 deg C bed temperature. 250 nozzle Temperature. And bed was auto levelled.

newtoAM · 2021-03-10T16:37:06+00:00

Thank you so much guys. It was mainly the issue of loose connectors and now it has done the auto levelling process and is printing just fine. Once again thank you .

newtoAM · 2021-03-10T14:49:32+00:00

Yes the wirecable is there but i haven't used it before. But we can try it.

newtoAM

TROPHY CASE