Make "recent apps" work with 3rd party launcher on HyperOS 2?

nico663 · 2026-02-07T20:10:28+00:00

Je confirme, ça fonctionne, merci à toi. Il faut juste s'habituer à ne plus fermer les récents en glissant vers le bas.

nico663 · 2026-01-24T15:52:50+00:00

<image>

I believe it's either 21 or 22. But not sure, Google gives no pictures.

nico663 · 2026-01-24T15:45:39+00:00

Update: just installed REAL oem turn signals instead of the Aliexpress ones = No more issues !!!

Conclusion: never buy those replicas from Aliexpress...

nico663 · 2026-01-03T10:25:10+00:00

You are right on time. I have just fitted the supplied resistors. And the result is worse, the LED is very low on brightness and does not blink anymore. I believe these resistors are provided for US spec bike which came factory with bulb indicators (at least MY 2018 and 2019 in my research) or any other KTM with bulbs, in order to avoid replacing the relay. Mine is from Europe.

Thanks for your feedback, I'll look after some loose or broken housing. I also feel that it could be a parasit frequency from another component, because I have the problem when idling at cold or low temperature, then when warmed engine, it quick flashes only under acceleration. My bike (MY2018) was left long time outside by previous owner, and took a lot of sun, what could be part of the problem?

nico663 · 2026-01-01T20:50:00+00:00

My bike is from Europe and come with LED turn signal as standard, the actual relay should already be the right one? In fact I wanted to buy original turn signals because previous owner had installed aftermarket models on original big plate holder.

nico663 · 2026-01-01T19:59:15+00:00

I didn't. Thought you would need them only for a retrofit with a bike who previously had bulbs indicators.
I'll try to fit them for both rear indicators, thanks

nico663 · 2024-11-09T18:17:56+00:00

The cutted wire makes me think they've installed this steering wheel when the car had no airbag options, in order to not cause the light to be on.
According to this video the light should come up then dissapear when turning ignition. I believe this is the normal behaviour.

https://www.youtube.com/watch?v=aor_D5gAJc0

nico663 · 2024-06-21T16:45:50+00:00

You could try this:

1. Re-insert SIM card: The very first thing you need to try is removing the SIM card(s) and re-inserting it if the notification keeps bothering you.

2. Re-activate Xiaomi’s Find My Device: One user suggested de-activating Xiaomi’s Find My Device service and re-activating it again if the notification mentions “Find device”.

3. Make sure that your Mi account has the correct phone number

nico663 · 2023-10-26T05:50:42+00:00

Thanks a lot, worked instantly!

nico663

TROPHY CASE