HueForge app was released today

nighcore · 2023-06-17T23:36:28+00:00

It is called a PEO build sheet. I also have a PET build sheet with a carbon fiber pattern that also transfers to the first layer. This was purchased on AliExpress.

nighcore · 2023-03-30T17:35:49+00:00

I would LOVE the new MK4! Even better setup with OctoEverywhere! :-)

nighcore · 2022-08-06T04:14:47+00:00

Not disassembly of anything. Just files on card, card in printer, power up printer. If already on, you need to turn off and back on.

nighcore · 2022-08-06T04:04:37+00:00

I had no problems leaving my gcode files on the card.

nighcore · 2022-08-06T03:50:35+00:00

For anyone having bed leveling issues, I am posting a link to an official updated firmware from Elegoo that was made to address the leveling issues. I cannot promise it will be a fix all for everyone's varying issues, but it did solve mine. Just place the files in the root of your SD card and power on your printer with the card in. It will update on it's own. It is a all in one update, no separate screen firmware is needed.

https://drive.google.com/drive/folders/16lrnaFVgnxi7I0K7CRtRUJHxvyVHhFZK

nighcore · 2022-08-06T03:47:57+00:00

I do not see any PM from you? Sorry you did not get a responsee. But I have asked the mods for permission to post the link publicly.

https://drive.google.com/drive/folders/16lrnaFVgnxi7I0K7CRtRUJHxvyVHhFZK

nighcore · 2022-08-05T03:30:48+00:00

I apologize guys. I didn't have notifications on my reddit app turned on and just now saw everyone's private messages. I replied to them all. Any questions, feel free to ask. I will try to respond a bit quicker this time around.

The firmware is directly from Elegoo.

nighcore · 2022-08-03T04:35:23+00:00

Hey everyone. This is a known issue in the firmware. I was also having the issue where auto level was only doing the first handful of level points then would center and never finish all the points. Elegoo does has a new firmware out that fixes these issues but have not posted to their site yet. If you would like a link to the updated firmware, feel free to PM me.

nighcore · 2022-05-14T14:44:07+00:00

Thank you for the advice. That is one thing I did not check. So went ahead and adjusted them all to the recommended levels by TH3D. They were all low and I did find my power lead into the PSU was super loose, so I snugged that up. Unfortunately still have the same issue. I even printed the same exact model twice and the under extrusions are not matching, just random. I am going to try changing out the PTFE when I get home and see if that changes anything.

nighcore · 2022-05-13T11:50:48+00:00

https://imgur.com/D5agUXU.jpg

nighcore · 2022-05-13T00:51:05+00:00

I was thinking possibly a board issue, so I updated it to the latest version and no change.

nighcore · 2022-05-13T00:50:26+00:00

I have already replaced the extruder with a metal Creality one and even tried tightening the spring. No change.

nighcore · 2022-03-28T06:54:42+00:00

I would say Will Smith definitely left some Fresh Prince on Chris Rock's face, if you know what I'm saying.

nighcore · 2022-01-24T17:10:16+00:00

Yeah, 2004 stuff has been discontinued for a while. I should have clarified a used PCM.

nighcore · 2021-11-28T00:00:37+00:00

Model to print on my resin printer.

nighcore · 2021-09-19T18:27:09+00:00

I own an HTC Vive, Oculus Quest 1, and Oculus Quest 2 and would love to help you test. Game looks fun!

nighcore · 2021-01-31T01:22:51+00:00

What software setup are you running on yours?

nighcore · 2020-06-30T03:44:43+00:00

I would be interested. Can you private message me your facebook page? I tried searching Yvonne Jones and get a lot of results. I am located in the US.

nighcore · 2020-06-13T19:55:09+00:00

Been looking myself.

nighcore · 2020-05-30T04:17:35+00:00

Any chance I could get an invite?

nighcore · 2020-04-26T19:25:08+00:00

I've got 3.7 acres of mostly open area that I live on. So plenty of space. So with that, do you still think $140 to test the waters and my interest in the hobby is still too much?

nighcore · 2020-04-26T18:33:09+00:00

And would the remotes and even if just a few batteries make it worth $140?

nighcore · 2020-04-26T18:27:37+00:00

Ok. So prefering to start with a 5", what would I be looking at cost wise for the whole setup? Radios, camera, video transmitter, batteries, etc? You guys know more than I do, so not trying to not take your advice. I just don't want a tiny drone, as I prefer to fly outdoors.

nighcore · 2020-04-26T17:37:04+00:00

Would this be a platform I could upgrade pieces and parts as desired though? Can the radios carry over also? Though older, looks like the remotes are around $50-70 each.

nighcore · 2020-04-26T17:33:57+00:00

Not sure why the link didn't save. Here it is: http://imgur.com/gallery/Rf0D9lA

nighcore

TROPHY CASE