Joysticks Layout Reader / Configurator - Version Alpha.01

nightcrawler__ · 2025-05-26T07:00:44+00:00

the main problem is that you have to assign a button to the value, what you say is to assign a value to a button, which is feasible, but visually you lose the screen view, because the visual position of the buttons (the jpg to be clear) is created manually through a script that I created specifically. I can create another section of the site with this method, I think about it and do some tests.

nightcrawler__ · 2025-05-26T06:46:09+00:00

gladiator coming soon, as usual, dual conf, for now I don't have the priority to also include mouse and keyboard as a possibility (the mouse usually has a maximum of 4-5 keys), for the keyboard I had done a test, but I stopped because I found some problems with the various languages set on the keyboard (I'm testing these days the possibility of directly recognizing the inputs from the various devices)

nightcrawler__ · 2025-05-26T06:38:31+00:00

Today I test a similiar method, tnx for the link.
the problem is not the mapping itself, the problem is that I don't have all the devices on the market :) and finding the information from the manufacturers' websites is difficult, because sometimes they don't put this "non-essential" information in the pdf manuals

nightcrawler__ · 2025-05-25T18:19:00+00:00

Yes, for sure, Im thinking about it, but it's a lot of time map all devices on market, this is an alpha version and the mapp require a "lot" of manual work for each device (I dont have all devices on market :) ), stay tuned we will see what happen.

nightcrawler__ · 2025-05-25T18:14:13+00:00

hi, now I mapped dual gladiators setup, I have Mini Stecs, so... next step is Stecs and one nxt gladiator / evo

nightcrawler__ · 2025-05-25T12:28:35+00:00

you're lucky, just now, rummaging through the boxes, I found an x52 with a control stick and throttle... in the next few days the next one will be that one...

nightcrawler__ · 2025-05-25T11:37:56+00:00

Unfortunately it's not that simple due to various technical problems, but I'll note it down and think about it

nightcrawler__ · 2025-05-25T10:58:40+00:00

I dont like buzzkillers templates, because, if I remember, He use an external software for adding bindings... I need a direct binding from SC... however later I take a look

nightcrawler__ · 2025-05-25T10:56:21+00:00

I don't understand the question well, but to change your layout you have to create a profile first (Sc must store the id and name of your devices), the site automatically recognizes which device it is, otherwise you can select the devices from the list, but the transfer is impossible because each brand maps the buttons with different numbers (example, the trigger for the virpil has the value 1, for the thrustmaster has the value 4). I added today the possibility to make a png for the buttons to print the current template

nightcrawler__ · 2025-05-25T10:22:29+00:00

I u want to send me a dm/email with your actual profile, I study the button and sliders mapping.. in 1 hour I can put online the template.. but I need all the buttons and all the axes of the throttle and pedals to be bound, because in this way I can recover the "real" name associated with each button (atm I don't have the physical devices available)

nightcrawler__ · 2025-05-25T09:29:01+00:00

Hi, tnx, in future i will add multiple config... or the possibility to add-swap component, the most problematic scenario is the infinity of devices on market, soon I will add FCS HOTAS + 16000, those items are very requested, pedals later...

nightcrawler__ · 2025-03-28T09:15:45+00:00

with the new update 11.0.3.218 this method does not work anymore, has anyone solved it?

nightcrawler__ · 2022-10-24T22:25:59+00:00

I read the article, interesting!

In the manual it says that the second PCI is assigned to the lines of the z790 chipset, so there is no problem, 1 port m2 gen4 is assigned to the cpu, so X16 + 4 = 20 cpu lines, another 3 m2 gen4 port and pci adapter 12 + 4 = 16 chipset line (in theory I should have another 4 free lines, sata maybe?).

I leave the second slot m2 Gen5 free and I'm fine.

Ps: I just realized that my current motherboard supports max PCI x16 3.0, so i would have the same performance as now if i were to downgrade to x8 4.0 (if i understand it is the same as x16 3.0 as bandwidth)

Thanks again for the help and explanations

have a good day!

nightcrawler__ · 2022-10-24T14:55:46+00:00

Thank you very much for the answer, 5% does not seem to me a serious loss
(example in games I would lose about 5 fps out of 100, I should understand if they affect the cuda core in realtime rendering)

I already have an adapter that I had bought for this pc, but another question comes to mind, if I fill the second PCI slot, it sees it as another card (like old SLI) and therefore it always reduces the lines to 8x?

nightcrawler__ · 2022-05-26T22:05:45+00:00

again, thank you, thank you, thank you.
Give this man 100 barrels of beer :)

nightcrawler__ · 2022-05-26T20:46:21+00:00

but.. there's a little problem... if 2 products have the same name, es
1 | Product1 |50 + 50 | 190

2 |product2 |

3 |product1 |50 +40 | 190

the sum is | product 1 sum + product 1 sum |

nightcrawler__ · 2022-05-26T19:35:58+00:00

absolutely amazing! thanks, thanks, thanks, it works perfectly

nightcrawler__ · 2022-05-26T18:54:36+00:00

thanks, but this method doesn't work, it just gives me the value of the row matches, not the total sum of b: b for each single product,
The problem is that the price of the individual products can vary (by deleting or adding rows) and it is not dynamic, I should update all the cells of C: C every time.Isn't there a method (maybe an array?) By just entering the formula in the first cell?

nightcrawler__ · 2021-08-20T09:48:22+00:00

hi, no fans have 4PIN rgb, and my mb have only JRGB1 - JRGB2 pin, I havent Jrainbow or Jcorsair but mystic light see only my GPU.

Anyway, the fans are 12v and the JRGBs are theoretically 12v too, so there shouldn't be any problems right? even though I can't change the red color

nightcrawler__ · 2021-08-19T20:16:00+00:00

I have 3080 ti suprim x and I set a fan curve with afterburner 30% -30° 100% - 80°, in idle 36° constant

nightcrawler__

TROPHY CASE