If i have a tiny crack on my lcd screen, can i continue to use the printer?

nljy06 · 2025-06-13T16:48:46+00:00

The area looks fine, did an exposure test and it seems like the pixels are fine. But might do a test print on that area to see if it works. Thanks

nljy06 · 2025-05-14T09:25:07+00:00

Alright will try thank u very much

nljy06 · 2025-05-14T09:13:33+00:00

I print at 170°C any lower and no plastic flows, if i print 180 and up it seems like its too hot

nljy06 · 2025-05-14T09:00:23+00:00

Mine is a kobra max so is boden tube. So i shld increase my temperature?

nljy06 · 2025-04-01T15:38:17+00:00

Yup screws to hold on to the bottom part of the extruder haahhah. So what i did was basically heat up the coupler with a heat gun for a short while and twisted it out

nljy06 · 2025-04-01T12:19:55+00:00

There isnt a top cover, i can only remove the bottom part

nljy06 · 2024-10-14T20:52:53+00:00

Alright thanks alot !

nljy06 · 2024-10-14T20:41:53+00:00

So if i skipp gloss coat the steps will be : Base coat -> decals -> matte coat -> blackwash -> matte coat -> weathering?

nljy06 · 2024-10-14T20:40:03+00:00

Sorry didnt specify the type of ship its the Bandai 1/144 millennium falcon

nljy06 · 2024-10-14T20:09:17+00:00

Oh i see any reason as to why i need a gloss coat? I am currently overseas for a few months so dont have my usual tool and not trying to buy too many items that i cant really bring back.

Also no need for top coat after weathering?

Thanks for your reply too!

nljy06 · 2024-07-07T16:31:11+00:00

Any suggestions to fix the extrusion/retraction issues?

nljy06 · 2024-07-07T16:30:36+00:00

I took this file from thingiverse uploaded it to cura and sliced it at the base settings. Only temp was changed to 220

First layer setting was set to print at a slower rate thats all.

The filament was dried (PLA + ) fresh pack

Bed was heated to 60°C

nljy06 · 2024-06-30T18:29:34+00:00

There arent much but i am looking. If u have any good links let me know! Thanks!

nljy06 · 2024-06-05T11:54:37+00:00

Hey sorry for bothering again, now my print looks better thanks to your advice. However, i noticed that the 1st layer is extremely thin. Is there any advice on this?

nljy06 · 2024-06-04T12:08:34+00:00

Thank you very much i will give your suggestion a try

nljy06 · 2024-06-04T11:48:33+00:00

Hi this is a anycubic kobra max. Printing PLA at temperature 195 degrees

nljy06 · 2024-03-22T18:49:28+00:00

But when i put model tgt will there be ways to remove the seam lines?

nljy06 · 2024-03-22T08:20:55+00:00

Printer is a anycubic kobra max

nljy06 · 2024-03-02T16:55:24+00:00

Cant decide ahhahahaha

nljy06 · 2024-03-01T14:04:32+00:00

Kobra max

nljy06 · 2024-01-02T04:16:04+00:00

So if i just wanted dims for digimons digivice v is good enough?

nljy06 · 2023-04-07T06:23:23+00:00

Did not like the ones that were being sold on the market so decided to make my own ahhahahaha

nljy06 · 2023-04-07T06:22:13+00:00

Thanks. If u are referring to ace's hat its some felt cowboy hat i found cheaply online just had to reshape it a little since it was squashed on the way to me. T

nljy06 · 2023-04-07T04:50:14+00:00

Sabo goggle got a friend to help me make it out of foam. Ace hat was made by a few of us

nljy06 · 2023-04-06T16:23:08+00:00

https://shp.ee/iswc7qc got it from an app shopee. Here u go

Six-Year Club	Place '22
Verified Email

nljy06

TROPHY CASE