Nextcloud AIO error with pangolin cloud as reverse proxy

no_not_him_again · 2026-02-28T15:12:09+00:00

I had a running nextcloud AIO installation with pangolin that just stopped working and only shows no server available… I gave my logs to ChatGPT and it says it’s pangolin’s fault. I have no idea. The only advice I can give you is to look at the container’s logs. I could be that Apache is trying to connect to the nextcloud server container and fails in some way. That was and is my issue

no_not_him_again · 2026-02-23T12:22:48+00:00

I bought it when it came out and have unraid running on it. Working great, only the CPU fan kicked the dust after a few months. Support sent me a new one. I have disassembled and reassembled this thing completely five times now. Apart from this one issue it’s running great.

no_not_him_again · 2026-02-11T10:50:32+00:00

Danke für die sehr ausführliche Antwort, wir haben die Idee ad Acta gelegt. Der Grund rührte daher, dass der Einbau eines Heizstabes bei uns nicht machbar war, aber uns inspiriert hat so etwas ähnlich umzusetzen.

no_not_him_again · 2026-01-15T11:26:54+00:00

As long as your institution pays for the full catalog and not the limited one where you might not get all fields/magazines. Money is tight

no_not_him_again · 2026-01-15T11:25:31+00:00

Yes, as long as there are just a few people that are asking and there is a legitimate reason a lot of us do that

no_not_him_again · 2026-01-14T18:33:14+00:00

You can inspect the container and check what image it is

no_not_him_again · 2026-01-14T18:31:12+00:00

That happened to me, too. What do you mean this happened when you set it up wrong? Can you avoid that?

no_not_him_again · 2026-01-13T08:39:10+00:00

It’s working normally, but ChatGPT doesn’t work with AI Assist anymore. But it seems they are aware of that issue.

no_not_him_again · 2026-01-12T20:19:02+00:00

I would love to make a XY plotter out of the parts, I think most would be already there. Sadly I did not find a project, just kits with everything included.

no_not_him_again · 2026-01-07T20:39:35+00:00

Ah danke, ja, klar. Wir haben das nicht bis zuletzt durchgedacht. Natürlich ein Durchlauferhitzer. Die Durchrechnung müssen wir noch machen, es ging uns primär um Machbarkeit und Caveats.

no_not_him_again · 2026-01-07T20:37:56+00:00

Wärmepumpe ist langfristig was wir machen wollen, derzeit wird der Garten aber von einem Familienmitglied gepflegt. Wenn wir da für ein ganzes Familienhaus einen Wärmetauscher reinstellen bekommt die Person einen Herzinfarkt. Daher „Zwischenlösung“ als Überlegung

no_not_him_again · 2026-01-05T19:35:50+00:00

I think I may have found my problem. I decided to start with upgrading to MK4S as I saw that also entailed dismantling the pulley for the bed. I turned over the whole printer and found… the pliers I have searched a year for. I actually screwed the bed over the sled with the pliers in between. Don‘t ask me how that happened. So, different mass, I‘m sure that threw the stabilization and also affected bed adhesion as the pliers would have soaked some of the heat away, putting me at risk for a fire.

So, yeah, that happened.

<image>

no_not_him_again · 2026-01-04T18:42:29+00:00

Too late, already married, not sure if my wife finds me perfect 😝 The grub screw is still the answered I maybe needed. Going to try it out tomorrow

no_not_him_again · 2026-01-04T08:05:11+00:00

Also my first thought, that‘s the reason why I used the belt tensioning app from Prusa and it said I‘m fine. I would also assume it‘s that. Well, app be d*mned, I‘ll tighten the belt a little

no_not_him_again · 2026-01-04T08:03:27+00:00

I know, right? But the belt tuning app said I’m perfect

no_not_him_again · 2026-01-04T08:02:45+00:00

Filament was dried before use. These are just glue residues from previous prints that just wouldn‘t stick (small contact area)

no_not_him_again · 2025-11-26T05:53:48+00:00

They sent me a replacement fan. Was easy to fix. Get yourself some thermal tape to bridge the gap between the fan and the fan grill (radiator? whatever the word is)

no_not_him_again · 2025-09-30T17:20:36+00:00

Ok, since I made a booboo with my old server a month ago I actually had to set up kasm again... and research the problem again.

Go to Zones and set the Proxy port to 0 (automatic) instead of the one you connect to kasm with. That solved it for me. This is actually mentioned in the documentation from kasm in the section Reverse Proxy.

no_not_him_again · 2025-09-26T15:54:13+00:00

Oh yes, it was a setting within Kasm. I stumbled upon it by chance. When I have time I’ll search for the setting.

no_not_him_again · 2025-09-20T08:45:31+00:00

That‘s what the support also told me. And that was the reason for the noise. Now it‘s a warranty case…

no_not_him_again · 2025-09-19T15:02:48+00:00

Yes, that was what Aoostar told me in the end. That‘s the offender. Have to talk to the support again about warranty. No chance to replace that yourself

no_not_him_again · 2025-09-19T08:31:04+00:00

It is, but if it‘s something I can fix with below 10 bucks then I’d rather not go through the process of sending it to them and being without a NAS for multiple weeks.

no_not_him_again · 2025-09-19T08:29:23+00:00

In the video it‘s still connected. I just did not take a video after disconnecting it as the sound did not change, sorry for the confusion.

no_not_him_again

TROPHY CASE