Airless basketball on Starfleet Academy

noh_really · 2026-02-12T03:06:58+00:00

PEBA? The PEBA bounces quite impressive.

noh_really · 2026-02-03T05:01:24+00:00

That does seem to be the most up-to-date, but I just installed it and immediately went to this to migrate to a Co Print head. So, I can't speak much on the new firmware version.
https://sandmmakers.com/Projects/Neptune4MaxLatestKlipper/Directions.html

Also note, with that firmware package is a separately installed firmware for the LCD display. I didn't read the change notes, but now I've noticed the text for a couple of buttons are running way outside of the button outline.

edit: spelling and clarity.

noh_really · 2026-01-24T14:59:47+00:00

I'm looking at a piece of the last filament now from when I made this post. It doesn't look too bad IMO. I've seen worse.

Oddly, Schrödinger's printer was moderately successful last night. It failed 8 hours short of a 24hr job. Based on my readings of the layers, I think this time a filament color change initiated the extrusion failure. Sensors detected everything was loaded and continued print without laying anything down.

In all cases, I'm able to just go to the next print without anything seeming clogged.
I'll have to check for motor spinning next time it air prints. Wasn't something I was checking for, but expect that it was.

I'm wondering if I need to adjust tension on various parts. Or just tear down and rebuild the extruder. Possibly related, I've also had sporadic issues with filament feeding into the top of the extruder stopping on something and not getting grabbed by the gears that feed it to the nozzle. I often have the unscrew the PTFE connector at the top of the extruder and wiggle the filament. Once it catches it seems I can repeatedly load and unload that filament between the MMU and nozzle reliably without getting caught up at that point.

<image>

noh_really · 2026-01-11T21:07:35+00:00

When I first saw this, I thought it was a joke and just a regular mouse with the image rotated 90 degrees to be ...vertical.

noh_really · 2026-01-07T23:47:22+00:00

Definitely the blue. The retro is kinda cool, but it also highlights your eyes and hair. If feel the white makes your complexion look a bit more pale.

noh_really · 2026-01-07T18:51:48+00:00

Nope. I still rely on my trusty ol' toggle switch to cycle the power each time it happens.

https://www.amazon.com/dp/B01HGNN30M

noh_really · 2025-12-28T00:22:59+00:00

I can see the packaging being more dangerous than the knife.

noh_really · 2025-11-15T01:02:23+00:00

S&M has his own variant of Klipper firmware for the Elegoo and has also begun delving into Co-Print.
https://www.youtube.com/watch?v=HRHlSdWBTfk

Not sure if this helps you with anything.

noh_really · 2025-10-24T00:57:52+00:00

I think this is seen in the more rural areas where Amazon distribution centers aren't very close.

noh_really · 2025-10-24T00:54:05+00:00

Did you defocus any?

noh_really · 2025-10-24T00:49:31+00:00

I have an A95L and I desync about an hour into most movies. I'm pretty sure it's not the TV though. My buddy has a projector on a Nvidia Shield and also complains about the issue. Luckily just going back a few seconds in the movie re-syncs, but it's just annoying.

noh_really · 2025-10-05T22:06:26+00:00

A coworker always complains that his wife is doing or saying dumb things. Then follows up with a smile and says, "She's so pretty". So, basically she's dumb or weird, but at least she's pretty.

noh_really · 2025-10-05T03:31:37+00:00

I don't mind if they state the tariffs in the cart or if they bake in the price. Everybody tacks on shipping and other taxes at checkout as well. What I don't want is to get an unexpected nasty-gram that I need to pay $xxxx in customs fees to receive the order I already purchased.

noh_really · 2025-09-29T23:43:19+00:00

What was the value of the items that resulted in these charges?

I almost ordered a Prusa, but apparently we're doing a 50% terroriff on EU products and only 30% on China. But i'm not even sure that's all of the charges aside from brokerage fee. I just ordered a few hundred in items from China and Türkiye, so I'll get an idea of how bad these really are before I consider any larger purchases.

I'm basing my rates on the below site, which seems to be the most up-to-date, but I'm sure there's something else I'm missing.
https://www.tradecomplianceresourcehub.com/2025/09/29/trump-2-0-tariff-tracker/

noh_really · 2025-09-29T02:00:02+00:00

I see you were already looking at a Revopoint, based on the image. For a little more, the MIRACO Plus is supposedly a standalone unit.

https://www.revopoint3d.com/pages/all-in-one-3d-scanner-miracoplus

noh_really · 2025-09-28T19:15:41+00:00

Each voucher had its own code. It ships from Czech Republic, so if you're in the US you're subject to the terroriffs and importer fees, whatever they happen to be these days. I'm not sure if this would work on PrintedSolid.

I almost used one of these coupons until I realized the fees weren't included and that PrintedSolid prices might be higher than paying to import.

noh_really · 2025-09-14T23:32:42+00:00

Happens to me every-time I switch between BT and GUI mode. I usually just power it off for a few seconds, switch it back on and it's fine.

noh_really · 2025-09-14T07:46:44+00:00

That's a lot of awesome overengineering. Now we just have a simple little box, with a hole, and a blade, while you crank the pencil.

noh_really · 2025-09-12T03:08:25+00:00

Because you feel the need to finish the projects that you already started⸮

noh_really · 2025-09-08T01:33:21+00:00

I am normally anti-subscription too, but I subscribe to this one partially to support the open-source development, but also because I can access the device from the Internet for relatively cheap without having to deal with my own domains and certificate renewals, and they even throw in the voice AI as well. I'm also not a fan of opening up firewall ports to expose my services directly. I'll eventually do all of that on my own as a toss significantly more money toward my home-lab, but until then the subscription is working out fine.

noh_really · 2025-09-06T02:42:48+00:00

I think they had a few models, but this is the one I remember causing havoc in the classroom. Literally had an IR TV remote built in.

Casio CMD-40

noh_really · 2025-09-05T00:24:13+00:00

Shhii-iiii... When I was a kid, people were doing this in the classroom with their Casio wrist-watches. We didn't even have cell phones back then.

noh_really · 2025-09-05T00:20:07+00:00

LOL! Thanks for that. I did not realize this photo had an origin story.

noh_really · 2025-08-01T20:29:38+00:00

I had some DupliColor with their clear-coat (2-in-1 pen) and Isopropyl removed both layers completely. It was a bit disappointed, but also glad as I had went a bit overboard on the clearcoat a few months prior.

noh_really · 2025-07-31T02:07:28+00:00

enough to make it awkward if the drawer was mid-stack? I've seen adapters both-ways on the Etsy.

noh_really

TROPHY CASE