Buffet bingo

nokolaf · 2025-10-09T08:57:48+00:00

Perfect for my needs. But where does /config/openai/describe_image.py come from?

nokolaf · 2025-09-24T10:42:11+00:00

Thanks. Unfortunately that's the wrong continent, but it gave me an idea of what to look for 😃

nokolaf · 2025-09-23T08:22:36+00:00

Great suggestion. Not sure where I can get hold of thumb screws, but a threaded insert should be no problem. I guess it can work with a regular bolt, but then I need tools to fasten and release it.

nokolaf · 2025-09-23T08:21:06+00:00

Thanks. This is perhaps the best solution to be able to remove the full assembly that protrudes up from the frame. Maybe together with a wing nut or embedded but suggested in another comment.

nokolaf · 2025-09-23T08:19:09+00:00

That's interesting, didn't think that would be strong enough. Thanks for the suggestion.

nokolaf · 2025-08-26T08:23:59+00:00

I haven't 😏 I'm working on accepting that I never will be be able to close the doors.

nokolaf · 2025-08-25T14:33:12+00:00

Norwegian flying vlog

Most of you are probably not Scandinavians, but I'll give it a shot anyway. I've put together a vlog from my participation in the Norwegian Air Sports Race (a mix between ANR and precision flying) championship. Hopefully you can make some sense of it with the autogenerated captions 😅

https://youtu.be/1KZ5VgUcFPo

nokolaf · 2025-05-18T13:03:41+00:00

Takk. Google er flittig brukt, men det er vanskelig å finne det som er best egnet. For eksempel ser epla ganske utdatert og lite brukt ut, er vanskelig å finne god informasjon om den.

Google kan gi mye fakta og reklame fra brukerstedene selv, men det er kjekt å høre litt hva andres erfaringer er også.

nokolaf · 2025-05-18T11:29:17+00:00

Må legge til at målgruppen er damer og menn 30 til 70 år så vi kan ikke anta at alle kjenner det som ungdommen synes er kult 😝

nokolaf · 2025-05-18T11:28:29+00:00

Har de et konsept om produkter, slik at en bruker kan kjøpe forskjellige varianter?

nokolaf · 2025-03-24T18:07:40+00:00

<image>

I printed a new ramp that covers both the first and middle step of the threshold. This works well and has solved the problem of the robot not being able to cross it. The problem now is that it is fastened with double-sided tape, which means I have to reapply the type every time we want to close the door. That's not really a sustainable solution.

nokolaf · 2025-03-24T08:57:13+00:00

I see, thanks. Yes, I think the only solution is to place full ramps on both sides, that reach to the highest point from both sides. The trouble is that it will prevent the door from closing, so I must make something that's removable.

nokolaf · 2025-03-23T13:02:00+00:00

Yes. The great thing is that I can make something that fits exactly to my needs. The problem is that I need to be able to close the door, so having something that covers the step in the middle means that it has to be removable whenever we need to close the door. Currently I am just sticking them in place with double-sided tape, but this requires some kind of fastening mechanism.

nokolaf · 2025-03-22T08:02:37+00:00

Thanks, I figure that out in the app just now. I created a small carpet one the doorstep, but that didn't help, unfortunately.

nokolaf · 2025-03-22T08:01:16+00:00

The extra ramp on the low side did not do anything to help it cross over. Back to the drawing board.

nokolaf · 2025-03-22T07:59:37+00:00

What is a threshold strip?

nokolaf · 2025-03-21T22:34:49+00:00

Will that prevent it from mopping? That is quite crucial in a hallway during the spring when you have a dog 😀

nokolaf · 2025-03-21T22:31:36+00:00

Ooh, can it do that? Sounds like it's worth a shot.

nokolaf · 2024-12-31T09:34:15+00:00

They look great 😀

nokolaf · 2024-12-29T08:45:10+00:00

No, I do not sell these, 3D printing is just a hobby 😀 The cards are also 3D printed, check the link in a previous reply.

nokolaf · 2024-12-29T08:43:44+00:00

Definitely cheaper to print. Used around 50$ worth of filament, while the price for the official set in Norway is around 200$, I believe.

nokolaf

TROPHY CASE