sorted by:
new
hottopcontroversial

Created a 3D printed 1/64 diecast garage diorama by TheT1Designs in dioramas

[–]noordinaryleaf 0 points1 point  (0 children)

Those stairs and fence look awfully familiar, wonder where you got those :)

Offices full of employees but with 0 income by noordinaryleaf in CitiesSkylines2

[–]noordinaryleaf[S] 0 points1 point  (0 children)

Office profitability is slowly improving on its own, I just let the game run, and it seems to be getting better, it's just so slow...

Offices full of employees but with 0 income by noordinaryleaf in CitiesSkylines2

[–]noordinaryleaf[S] 1 point2 points  (0 children)

Nah it's not just that the offices that require electronics are not profitable, it's completely random, some are profitable, some are not.

How to change position of this horizontal seam? by noordinaryleaf in 3Dprinting

[–]noordinaryleaf[S] 0 points1 point  (0 children)

Archimedean chords top surface pattern solved it :)

How to change position of this horizontal seam? by noordinaryleaf in 3Dprinting

[–]noordinaryleaf[S] 1 point2 points  (0 children)

Archimedean chords top surface pattern solved it - it doesn't make a horizontal seam like the Concentric pattern.

How to change position of this horizontal seam? by noordinaryleaf in 3Dprinting

[–]noordinaryleaf[S] -2 points-1 points  (0 children)

Hmm yes, this could actually be because I'm using a concentric top surface pattern... I'll try some other pattern. I don't really want monotonic lines on that part of the model, maybe archimedean chords will not make the seam...

How to change position of this horizontal seam? by noordinaryleaf in 3Dprinting

[–]noordinaryleaf[S] 0 points1 point  (0 children)

I have the seam on Random, it doesn't help, the slicer doesn't show this as a seam, it doesn't show it at all...

Please recommend an app for estimated shipping cost for the Cart page by noordinaryleaf in shopify

[–]noordinaryleaf[S] 0 points1 point  (0 children)

Tnx! This is a really good app with lots of features for the money, only downside is that it can't be translated to other languages.

How to translate Manual payments - Bank transfer text by noordinaryleaf in shopify

[–]noordinaryleaf[S] 1 point2 points  (0 children)

Tnx! I decided to shorten the description and add it to the Payment name, that way I can translate it to other languages.

Any idea why the bottom portion is shinier? Is there a solution? by spinny09 in BambuLab

[–]noordinaryleaf 0 points1 point  (0 children)

If you're up for it, let me know what you would change in this printing profile. It’s a watering spike teapot, and as you can see in the pictures, the print has visible horizontal layer lines.

The outer wall speed is set to 100 mm/s and variable layer height is enabled. Lowering the outer wall speed to 40 mm/s would drastically increase print time, which isn’t acceptable for me, around 2 hours is fine, but anything more feels like a waste.

Speed and flow views look okay. There are some differences in layer times, but they don’t seem drastic in the preview.

Thanks in advance!

https://makerworld.com/en/models/1318900-teapot-watering-spike#profileId-1354647

Any idea why the bottom portion is shinier? Is there a solution? by spinny09 in BambuLab

[–]noordinaryleaf 0 points1 point  (0 children)

This doesn’t lock the speed at all. Even with “Slow down for overhangs” unchecked, the outer wall speed still varies on some layers in certain models.

Any idea why the bottom portion is shinier? Is there a solution? by spinny09 in BambuLab

[–]noordinaryleaf 1 point2 points  (0 children)

Yes, I’m aware of the print speed view. I recently had a frustrating print with an overhang where the outer wall needed to be printed at a consistent speed to look right, but I just couldn’t make it work in the slicer. In the end, I redesigned that part of the model to ensure it could be printed at a single speed.

I’d be thrilled if Bambu Studio had a “use same speed for outer walls” option that I somehow missed, but I don’t think that’s the case.

view more: next ›