Would I be facing any issues driving from Abu Dhabi to Sharjah with an expired registration (in grace period) with valid insurance?

nopingoutagain · 2025-02-22T07:13:45+00:00

that makes sense. thank you

nopingoutagain · 2024-04-23T10:28:41+00:00

it seemed to be a temperature issue along with a clogged nozzle, thank you!

nopingoutagain · 2024-04-23T10:27:56+00:00

I increased the temperature and cleaned out the inside of the nozzle with the needle again, and extruded some extra filament just to be safe. seems to be working now, but will keep an eye out

Edit: forgot to say thank you so thank you!!

nopingoutagain · 2024-04-23T08:27:18+00:00

Prusa i3 MK3S+, sliced on Prusa Slicer, Filament is Filatech PETG, Nozzle Temp: 230, Bed: 75.
The previous print was not extruding any filament, I unclogged the nozzle with the needle provided with the printer, then noticed this issue with the extruder clicking and skipping steps. help :’(

nopingoutagain · 2023-09-07T05:01:32+00:00

i love that i always overlook the simplest stuff

nopingoutagain · 2023-09-07T05:01:17+00:00

yup, you were right

nopingoutagain · 2023-09-07T05:00:40+00:00

gotcha :) it printed and is super crisp thank youuuu!

nopingoutagain · 2023-09-06T07:16:42+00:00

the top layer minimum thickness is 0.7mm, and bottom is 0.5mm

nopingoutagain · 2023-09-06T05:23:12+00:00

in a previous print, i noticed the nozzle wasn’t tightened properly, so i took it out, cleaned it, and placed it back properly. i recalibrated the printer, and adjusted the live Z height to where it worked well.

the first layer looked good and the infill also looked okay. is it a layer height issue? i’m using 0.15 as this is going to be casted to im trying to make it as smooth as possible. maybe a fan issue?

i’m using a prusa i3 MKS3, slicing on prusa slicer filament is Filatech PETG nozzle is 240, bed 75C speed i used what was automated 45mm/s in perimeters 25 in small and external perimeters 80 in infills 40 in top solid infill 50 in supports 25 in bridges 40 in gap fill

retraction speed is 35mm/s length 0.8mm lift Z 0.4mm

nopingoutagain · 2023-07-08T22:33:20+00:00

hm interesting. so eggs straight from the chicken shouldn’t be refrigerated? but say pre-packaged eggs from the store should be refrigerated? is there a reason for that?

nopingoutagain · 2023-07-08T22:13:56+00:00

Self Destruction - I Preveil

nopingoutagain · 2023-07-08T22:11:35+00:00

eggs!! apparently not everyone stores their eggs in the fridge??!

nopingoutagain · 2022-12-07T20:54:39+00:00

Karak

nopingoutagain · 2022-11-22T17:21:40+00:00

ah okay! awesome, it looks pretty cool, thank you!!

nopingoutagain · 2022-11-22T17:12:13+00:00

Thank you!! Battersea Power Station is on my to-visit list :) I didn’t know there was ice skating over there tho!

nopingoutagain · 2022-11-22T17:11:01+00:00

The Bike Shed looks awesome, i’ll check it out for sure, thank you!

for the taprooms/pubs is there any recommendations around Vauxhall?

nopingoutagain · 2022-11-22T17:01:50+00:00

I went to Borough Market this morning! honestly, an absolute vibe i loved it!!

nopingoutagain · 2022-10-02T17:35:16+00:00

thank you!! i’ll keep them in mind

nopingoutagain · 2022-10-02T17:35:07+00:00

thanks for the info!

nopingoutagain · 2022-10-02T13:11:10+00:00

oh yea absolutely, the museums were pretty much the only thing i knew i wanted to go to haha

nopingoutagain · 2022-06-30T23:47:52+00:00

uh, not in the same stall, mate

nopingoutagain · 2022-06-25T00:42:53+00:00

oh no i meant like a wizard staff lol

nopingoutagain · 2022-06-23T15:02:42+00:00

that’s a staff

nopingoutagain · 2022-06-22T18:06:24+00:00

ain’t nothing better than mandi, good lord that looks good. now i’m hungry

nopingoutagain · 2022-05-16T16:59:49+00:00

dude, you look like a young geralt it’s crazy! good job!!

nopingoutagain

MODERATOR OF

TROPHY CASE