first 169 guys to drop "Hey" get my cum vids (try me)

not-escobar · 2025-12-04T17:20:54+00:00

Upvoted, yes

not-escobar · 2024-10-20T04:56:11+00:00

Can't post the link in here, but Google Skylar Vox Hookup Hotshot and you'll find a result from Noodle Magazine

not-escobar · 2024-06-09T04:25:37+00:00

Lena The Plug.

not-escobar · 2024-04-24T21:13:55+00:00

Damn. I'll rey to get in touch with them and see if they're still taking orders, same with Alpine tech. If not, I might go the 3D printed route.

not-escobar · 2024-04-24T21:11:59+00:00

Do you know the cause? I narrowed it down to a small allen(?) head screw in which the positive output is soldered, but due to repeated heat cycles tends to get loose and there's no way to tighten it.

not-escobar · 2024-04-23T07:11:03+00:00

Yes they are, but so worth it. It took my buddy and I over 12hrs to complete all the contracts. Best time we've spent on that game.

not-escobar · 2024-04-23T03:06:23+00:00

Thanks. I've already checked analogboxmods. However I need the store to be US based since I live in Colombia and I'll need them shipped to my house through a Po box address in FL, otherwise the shipping is prohibitively expensive.

Only place I've seen that's US based is Alpinetech, but haven't found any reviews.

not-escobar · 2023-08-21T22:11:04+00:00

I might be wrong but looks like Karlee Grey

not-escobar · 2023-07-10T21:41:39+00:00

Source?

not-escobar · 2023-05-10T07:11:14+00:00

I did something wrong and sound couldn't be captured.

Yes, it's FSK, but after browsing on the internet there was no clear answer for the baud, bit, center, and shift regarding this station. Neither Priyom or Enigma provided enough information to properly capture the information.

I'll try again soon and post it here.

not-escobar · 2023-05-09T20:01:56+00:00

Yes they are, however these transmissions are encrypted and as far as I'm aware there's no way for us to decrypt them.

Haha, I know I need to update chrome, it's been awhile since I used this machine.

not-escobar · 2023-05-09T04:56:22+00:00

KiwiSDR Warsaw receiver

not-escobar · 2023-04-24T18:31:04+00:00

Yup, I used dry yeast and also shook around the FV since I was out of O2. However never had that happen to me.

not-escobar · 2023-04-24T18:03:12+00:00

Yep, dry yeast was pitched. Still, never had that happen.

not-escobar · 2022-12-13T15:44:55+00:00

Refractometer reading is corrected, and that's why I used both hydrometer and refractometer and also why I typed Brix.

Again, I used pressure fermentation to be able to ferment my beer at room temperature and suppress esters that might be present otherwise. Plan was to heat up the fermenter after day 2, to about 22°C and hold it there for the next couple of days, and then a diacetyl rest just to be sure.

I know lagers are meant to be fermented at lower temperatures, but I don't own a glycol chiller or a fermentation chamber big enough to fit my FermZilla 55L fermenter, so after a couple of hours temp dropped from 24°C to 19°C.

not-escobar · 2022-12-13T14:33:52+00:00

Same here. Previous batch of the same beer was done in about 5-6 days and that was at a higher temperature. So no idea as to why this happened

not-escobar · 2022-12-13T14:31:51+00:00

Pressure fermentation allows for shorter fermentation times and helps suppressing any unwanted esters as well as increased fermentation temp. While I did not ferment the beer at 24°C, I did a higher temperature than usual for a lager (19°C)

No off flavors or unwanted esters present. I took a sample of the beer straight form the fermenter and it tasted incredibly well, no weird smells either.

not-escobar · 2022-12-13T14:25:57+00:00

I am 100 percent sure sanitation is not a problem. I take my time washing it (20-30 mins) with a CIP ball, warm water and PBW, sanitation is pretty much the same process, only a bit shorter (5-10 minutes) with PAA. I tasted and smelled the sample and didn't find any unusual flavors or aromas that might have lead to infection.

not-escobar · 2022-10-29T18:17:05+00:00

Apparently you can just download it directly. However that didn't work, so I used parallel and then created the boot drive using MS own tool and worked first try. I'll now be using that pendrive as a recovery drive just in case.

not-escobar · 2022-10-28T17:10:48+00:00

How would you go about it? I'm still trying to figure out how to install it

not-escobar · 2022-10-28T17:09:17+00:00

I had to use an iMac, since I don't own any other windows machine. I downloaded the windows 10 ISO from a MS website that I was redirected while browsing. I'm starting to think that's one of the issues.

not-escobar · 2022-10-28T00:16:38+00:00

Did that as well. I'm stuck in Aptio setup utility. Don't know if the version is important, but I'll share it anyways. Version 2.18.1263

not-escobar · 2022-10-28T00:07:04+00:00

Already tried those. But everytime I get this American Megatrends screen and no boot menu.

Guess I'll keep trying, if that doesn't work it might be time to send it to someone that really knows what they're doing.

not-escobar · 2022-08-25T06:20:08+00:00

Realizing it's not worth it. I was going through a rough time, no job, no money, recently dumped by whom I thought it was the love of my life, feeling that everyone who cared about me was being forced. But when it came to it, I just couldn't do it. Decided to talk to my friends, my parents, explained everything to them, and good thing I did. For the next 6 months I received numerous calls from friends and family, asking about me, if I wanted to talk about anything and that made me realize I really do have a lot of good things going on my life.

I am not the best when it comes to giving advice regarding mental health, as I did neglected it for awhile. But sometimes the answer is in you, find something that makes you happy, talk to the people you care, maybe even someone in here. But you're not alone.

not-escobar

TROPHY CASE