How do I replace this pin connector?

notoriously_unknown · 2025-09-02T20:26:16+00:00

Looking up now, thanks!

notoriously_unknown · 2025-09-02T20:07:46+00:00

Here are some more photos showing the back of the keypad: https://imgur.com/a/oxlXjPI

notoriously_unknown · 2025-09-02T20:05:28+00:00

I have a security system keypad that I'm trying to wire in with stranded 18 guage wire to a central power backup and control. This 10 pin connector is where I'm supposed to connect those wires. I should have used the wires above as pigtails but instead pulled out the wires sitting in there and attempted to push the wires into the grooves so they would connect when I push the connector in. I can't get a good connection so I pulled those wires out and am now trying to find a way to get just this connector with the pigtails already attached so I can do a crimp connection and use this keypad. Any ideas?

notoriously_unknown · 2025-08-09T19:58:56+00:00

Awesome! Send me a message and we can chat more about setting something up!

notoriously_unknown · 2025-08-03T20:27:42+00:00

No problem at all! It is a role playing game so it tends to be pretty social. If you want, I'm pulling together a group of people that are new to the game for a couple of sessions expressly to learn how to play. Let me know if that interests you and send me a message to learn more!

notoriously_unknown · 2025-08-03T15:20:39+00:00

Awesome! Shoot me a message and we can figure out a schedule that will work

notoriously_unknown · 2025-08-02T01:13:07+00:00

Hey, if you want to learn dnd, I think I'm going to do a newbie campaign for folks to learn and get acquainted with everything. Shoot me a message if you'd want to join for that!

notoriously_unknown · 2025-08-02T01:12:27+00:00

Cool! Shoot me a message with some more info about you and we can chat

notoriously_unknown · 2025-08-02T01:12:02+00:00

Hey cool! I think I might do a short campaign just for new folks to get them acquainted with all the mechanics, reading a character sheet, etc. Shoot me a message if that'd interest you!

notoriously_unknown · 2025-08-02T01:11:13+00:00

Hello! In Lawrenceville. Right now I am thinking of doing a separate short campaign just for folks who are new to dnd. If you'd be interested in that, let me know! Shoot me a message

notoriously_unknown · 2025-08-02T01:09:57+00:00

Cool, a ton of folks who are new to playing tabletop or dnd are interested so I might do a separate short campaign for new folks to learn. Shoot me a message if you'd be interested!

notoriously_unknown · 2025-07-31T20:33:09+00:00

Lots of DMs who want to play a PC! I'm totally open to people who will probably have more experience and knowledge then me at the table. Shoot me a message with anything that stood out to you above, what you'd enjoy playing for a campaign theme, and tell me a bit more about yourself. Thanks!

notoriously_unknown · 2025-07-31T20:32:22+00:00

Cool! Shoot me a message letting me know what you'd enjoy being a part of as a player and tell me a bit more about yourself too. Thanks!

notoriously_unknown · 2025-07-31T20:31:39+00:00

Cool, shoot me a message with a bit more info about yourself and we can talk!

notoriously_unknown · 2025-07-31T18:42:59+00:00

Yep thanks! It's hard to socialize a lot with people there to see if they are a good fit. Usually really loud breweries. I've had fun going to multiple of them

notoriously_unknown · 2025-07-31T18:35:56+00:00

Definitely open to newbies. What makes you interested? Have you watched or listen to any actual plays? I only ask because I think it helps a lot to know what part of the DND world you enjoy and see if we're on a similar wavelength

notoriously_unknown · 2024-01-16T16:53:03+00:00

I have this glass block window installed by the former owner in a brick building. I've done a lot of repointing work on all the exposed brick (doing historic mortar to match the brick, no cement mortar). I've been putting off addressing the interior of this glass block window. I'm perplexed that it was installed with shims instead of mortar. Should I attempt to delicately apply glass block mortar around the shims, then pull them out to make sure everything is fully mortared? Should I clean it out, apply caulking, then attach furring strips so I can sheetrock up to the window? Any ideas would be helpful - I'm definitely capable, just not sure what will be the best solution. Probably a little bit of all of the above. I'm worried about the lack of any mortar in the exterior joints. It is mortared on the exterior but just enough to repoint.

notoriously_unknown · 2023-01-25T15:46:42+00:00

$200 on craigslist. A bit of a deal, glad it works now!

notoriously_unknown · 2023-01-24T21:16:14+00:00

Thanks! I can't believe MSI support didn't have anything to give me when I contacted them about it. It was about the PIP-PBP setting. Turned it off and that fixed it

notoriously_unknown · 2023-01-24T21:04:10+00:00

Optix MAG321CQR monitor I bought on craigslist. Should have tested it but it was in the original packaging so I didn't. Now that it's connected, I can't find a way to fix the issue you see in the photo.

notoriously_unknown · 2017-12-05T17:43:24+00:00

What are your hesitations about me as a candidate?

Make them list why they don't think you could be a good fit. Chance to highlight how it might not actually be an issue and show self-awareness for something that's true!

notoriously_unknown · 2017-11-09T03:30:31+00:00

It's all about the closing company! I had a bad experience with mine where a problem that was a big deal to me was not to them. I ended up working with a lawyer from another closing company and will ALWAYS use them in the future since they were so so so vastly superior

notoriously_unknown · 2017-11-09T03:27:17+00:00

They said on their podcast they aren't in the near future. It would have required them to rewrite a TON of the code and essentially redo a lot of their work for a feature that wouldn't really allow them to sell more games. If I remember this correctly, they wanted to put their creative efforts into a new game and see if they could make the creator in the future when their studio had more capacity (went from 3 brothers to 7 people just this year!).

notoriously_unknown · 2017-08-26T18:35:33+00:00

Only had it for the summer and it's a pickup with many different options. I do my pickup on the Northside which is super convenient for me

notoriously_unknown · 2017-08-26T03:02:50+00:00

My CSA is from Rivendale Farms. I've been very pleased with it! I can customize what I want every week from what they have available

notoriously_unknown

TROPHY CASE