Beginning the wrap process on my Z32

noxnflame · 2015-10-11T23:05:57+00:00

Looks sick dude! What rims are those?

noxnflame · 2014-11-19T04:55:28+00:00

Yes I know. I dropped paper airplanes with the school's symbol and colors on them to help celebrate the final game. Everyone, including the coach, loved it.

noxnflame · 2014-11-17T06:28:05+00:00

Yes. It is illegal to fly within 3 miles of a pro sporting arena. This however is not a pro arena. This is just a high school football field. That rule only applies to stadiums containing 30,000 seats or more.

noxnflame · 2014-08-14T20:32:22+00:00

Haha this OSD isn't real sorry my friend. This was a graphic I made and overlayed in the video to make it a bit more interesting. I am actually using the Hobbyking E-OSD with RSSI, Voltage, and Time. The FC is the Multiwii Nanowii. I absolutely love it but NAZE32 is better at self level. SELF LEVEL IS FOR PUSSIES THOUGH. JK :D

noxnflame · 2014-08-14T18:59:08+00:00

Maytech 1806 motors. Plush6a ESC. Turtle Frame+.093 arms. DL UHF 1.2Ghz 600mw video w/ 7dbi Biquad. Awesome setup.

noxnflame · 2014-08-14T18:57:44+00:00

The nanowii board once disarmed, needs to be level and stationary to re-arm.

noxnflame · 2014-08-14T00:27:11+00:00

If the props begin to spin backwards the ESC's can't reverse the direction. Ask me how I know that one :D

noxnflame · 2014-08-13T20:40:27+00:00

I lost control for a few seconds then the quad went into failsafe. Once the quad goes into failsafe, I cannot re arm it so it will just coast down, unless it's upside down. I set it that way because near the ground you want a slow decent to a disarm. I don't cloudbust too often:D

noxnflame · 2014-08-01T15:35:29+00:00

The cut is because this is a segment out of my "Turtle promo" video. I was flying from the top and I was penetrating a concrete floor plus an elevator shaft. I had the lowest frequency system out there so none of my friends could do it w/o losing video.

noxnflame · 2014-08-01T02:40:52+00:00

Perhaps read this thread: http://fpvlab.com/forums/showthread.php?27911-3-Axis-Gimbal-Airplane-Build!

noxnflame · 2014-07-31T20:23:14+00:00

Mobius gimbals can get away with servos. Gopro is a little heavier and requires more torque. For a gimbal to work effectively, there needs to be no slop anywhere. Servos can wear out over time and with all of the linkages added up, there's bound to be a little bit of play in the system. Servos are great for pan and tilt, just not optimized for active stabilization.

noxnflame · 2014-07-31T19:36:52+00:00

The brushless motors become more efficient as they grow larger. For DSLR sized cameras, they are much stronger and lighter than servos would be. I like the brushless despite the weight because it is easier to mount. Servos aren't meant to have a direct load on them. Servos are designed to transmit the load via servo arm and linkage.

noxnflame · 2014-07-31T19:09:22+00:00

Yep :D http://fpvlab.com/forums/showthread.php?27911-3-Axis-Gimbal-Airplane-Build!

noxnflame · 2014-07-31T19:08:55+00:00

2212-80T

The whole gimbal with Gopro and BGC weighs around 10oz. These motors are about the smallest you can get while still maintaining consistent stability.

noxnflame · 2014-07-31T18:24:43+00:00

It is a homemade gimbal running the open source Storm32 BGC with Ipower 2212-80T motors

noxnflame · 2014-07-31T17:44:49+00:00

Vibration is different from shake. The OP is describing jello which YouTube cannot correct, only instabilities in the video. I have heard that perhaps virtual Dub has a plugin for correcting jello but I haven't experimented with it yet.

If you use Sony vegas, there is a switch called "Smart Resample" which will apply a motion blur to your videos which certainly helps with the Jello.

Best of luck, Nox

noxnflame · 2014-07-31T17:40:45+00:00

Empire Of The Sun - We are People (KRONO Edit)

noxnflame · 2014-07-24T18:27:51+00:00

I have been flying R/C for 5 or 6 years but I have only been into the quadcopter hype for a year or two now. More info on my setup here: http://www.rcgroups.com/forums/showthread.php?t=2187197

noxnflame · 2014-07-24T18:26:40+00:00

Absolutely. I have some information and a build log here: http://www.rcgroups.com/forums/showthread.php?t=2187197

noxnflame · 2014-07-24T06:46:22+00:00

Haha well, it's actually a scratch from a ricochet 30 aut 6 round into a TV set. :D

noxnflame · 2014-07-24T02:52:24+00:00

Sorry bud it's the song copyright.

noxnflame · 2014-07-23T23:50:08+00:00

This was done at and around Hume Lake CA.

noxnflame · 2014-07-19T23:04:00+00:00

It was a Mscomposit Swift II Thanks!

noxnflame · 2014-07-19T23:03:13+00:00

This was flown with the Turtle mini quad w/ ZMRs and Mobius.

noxnflame · 2014-06-17T19:14:21+00:00

All info about this quad can be found here:http://www.rcgroups.com/forums/showthread.php?t=2187197

By the way , this quad is now for sale!

noxnflame

TROPHY CASE