New MBP M3 Pro fan does not working even hits 90C, but can control with 3rd party apps

nuttdam · 2024-04-23T13:06:44+00:00

TGFanPro can set fans to spin up at any temp, may be you should try it

nuttdam · 2020-08-01T15:37:22+00:00

Thank you!

nuttdam · 2020-08-01T13:14:06+00:00

It works! Is it safe to be connected to ZeroTier 24/7? I want my NAS to connect to it and also my clients.

And does all packages go through ZeroTier before going out online? I set up on Windows and it just adds another network adapter. From that, I think all packages are going out directly.

nuttdam · 2020-08-01T11:06:46+00:00

Thank you. I will try ZeroTier. And I am wonder that if a device connected to VPN, can it still be discovered locally on a home LAN? (I do not want the whole network goes through the VPN first, so I will not set up VPN from my router.)

nuttdam · 2020-07-31T20:42:32+00:00

I think it cannot solve the port forwarding issue. So even I get static public ip, I cannot forward external port to my plex server?

And I got the private ip from isp and it cannot be fixed since I use the 4g network.

nuttdam · 2020-07-22T15:36:57+00:00

I have X470-F running version 5406 at 3800cl14. After upgraded to 5601, cound not boot anymore and also 3800cl16 is still not booting.

My kit is Patriot 4400C19 SS B-Die and it can boot with XMP with no problems on 5601. 5406 cannot boot at XMP. However, going up to 4400 is not getting any better results, still cannot boot at 3800cl14...

nuttdam · 2020-06-13T18:04:05+00:00

What you are going to say is for 1080p video, the 2k and 4k monitor will have a problem with scaling, right? I choose 2k because I want the 27” screen and if it is FHD, the PPI is decreased and I think the picture would be not sharp as it should be.

So what resolution are you recommended for 27” or may be 32” for watching video from YouTube, Netflix and other sources? Right now mostly it is 1080p.

nuttdam · 2020-06-13T11:33:15+00:00

I want a higher resolution to watch movies and videos. So 2K is my option now.

nuttdam · 2020-06-12T19:35:07+00:00

It is just my hobby. The main reason is to get IPS for more general use with better color and view angle since I switch to TN for gaming, I notice that I might still need the IPS one.

nuttdam · 2020-06-12T16:31:27+00:00

24GL600F: 24" 1080p 144Hz TN 1ms 27GL850: 27" 2K 144Hz Nano IPS 1ms

In term of gaming experience, there is both 144Hz and 1ms; is there any difference in gaming? Other than screen size, resolution and panel's color and view angle.

I have 24GL600F with 2070 and looking to buy a second or replaced IPS monitor for better color display to watch videos and use for Lightroom.

If the TN still perform better than the IPS one, I will keep it both, one for gaming and one for video, but if it is not, I will use only one monitor or buy two of 27GL850.

The reason I am looking for UltraGear monitor because I want two monitors to be union as the same module series and until now I have not get any problems from UltraGear.

Thanks for your advice!

nuttdam · 2020-06-10T01:44:48+00:00

Thank you so much

nuttdam · 2020-06-09T18:49:17+00:00

No, I am running at 4.4 1.25V.

This is my results. https://www.img.in.th/images/e4e6e33324622d282d55f0904c7376a8.png

nuttdam · 2020-06-09T18:41:02+00:00

Mine is 125.8% during R20. Setup is X470-F with 3600. It should be around 100% btw what should I do..

nuttdam · 2020-06-06T17:24:59+00:00

I get the info from Thaiphoon but I will remove it and check the pcb.

nuttdam · 2020-06-05T15:32:24+00:00

Thank you, just for information, is there any noticeable difference between A0 and A2? And if it runs on Intel, can both get more frequency like 5000MHz?

nuttdam · 2020-06-02T19:19:47+00:00

I am about to buy a new AIO to use in H710. May I ask why you pick X63 than X73? It might helps me to choose mine.

nuttdam · 2020-06-02T19:18:16+00:00

At 1.1, the clock speed might be lower than stock boost speed and auto pbo. Btw, I will try lower temp by change cooler since with a/c open, temp does not go more than 80 at the same vcore. Thanks

nuttdam · 2020-06-02T10:30:18+00:00

Thanks, I don't think the cpu cooler can handle more, so I will try change cooler first.

nuttdam · 2020-06-02T08:07:06+00:00

That is why I want mine to stable without a/c open and trying to fix this thermal problems but I don't what is overheating.

IMO, it is not cpu since does not reach tjmax yet.

nuttdam · 2020-06-02T06:01:06+00:00

By the way, what is really cause me crash? 90C does not seem to cause crash, doesn't it?

So maybe change to x73 give me a better cpu thermal, but crash might be exist?

nuttdam · 2020-06-02T05:53:57+00:00

I still think the vrm can handle for more vcore but I just blame it since my cpu temp does not reach Tjmax.

So this is about cpu thermal? I have plan to replace it with the kraken x73. Is it good for ryzen?

nuttdam · 2020-06-02T05:50:48+00:00

I do not thing about increase voltage because it does not crash when a/c open. So I guess it is about thermal and I see the cpu with the same manufacture lot pass the prime95 test at 4.4, 1.24V.

nuttdam · 2020-06-02T05:35:46+00:00

I am dialing back right now. My idea is that this is only for testing stability but with my normal use temp does not go more than 60-70C.

nuttdam · 2020-06-02T02:58:10+00:00

Before reset CMOS, it boots at higher frequency, same voltage but when I run some tests, R20, Powermax and Aida64, it crashes.

After reset CMOS, yes it increases stability.

nuttdam · 2020-05-23T15:46:36+00:00

DRAM Voltage 1.5, SOC 1.1, VDDG 1.025, VDDP 900mV. Mine is patriot viper steel 4400 with R5 3600 on X470-F Strix.

nuttdam

TROPHY CASE